-
Quick ViewEUROBOOR COBALT 29 PC INDEX JOBBER SET
The Euroboor M35 Cobalt High Speed Steel Jobber drill set is ideal for drilling through cast iron and stainless steel. The 135° split point helps to eliminate tip walking, and increases hole accuracy. The unique flute design is superior for removing shavings and material from the hole. All bits above 3/16″ have a 3-flat shank for stability in any drill or chuck.
-
Read MoreQuick ViewEUROBOOR CUTTING OILS
Our Euroboor IBO.10 is a general cutting oil with premium cooling and lubrication features, suitable for mild steel. This cutting oil contributes to a high cutting power and tool preservation, and improved processing times.
Euroboor MV.4 is a lubricating and cooling concentrate suitable for all metals. This water-soluble concentrate is particularly suitable for automatic dosing systems. -
Quick ViewEUROBOOR IBQ.13 QUICK CONNECT DRILL CHUCK
The Euroboor IBQ.13 Quick Connect Drill Chuck allows use of drill bits with a standard shaft, sized 1/16″ to 1/2″. The top connection is a 1/2″-20 threaded socket, and can be attached to the Euroboor 1/2UNF-MC3 adapter piece.
-
Read MoreQuick ViewEUROBOOR HML 2″ WELDON TCT CARBIDE TIP ANNULAR CUTTER
Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters 2″ with a drill depth of 2″ are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 2″ are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.
-
Quick ViewEUROBOOR 8 PC ANNULAR CUTTER SET
Our HCS.KIT/9 contains High Speed Steel Annular Cutters which feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. Euroboor HSS annular cutters are equipped with high precision Weldon shanks.
This is a 6 piece HSS cutter set with bits of 9/16″, 11/16″, & 13/16″, each in the 1″ and 2″ lengths. The set also includes two pilot pins. They are IBC.70 & IBC.90. -
Read MoreQuick ViewEUROBOOR WELDON TAP HOLDERS
The Euroboor Weldon Tap holders allow the operator to use a tap bit to thread out the hole that was just cut.
-
Quick ViewEUROBOOR DRILL CHUCK CONNECTION, MORSE TAPER TO THREADED
The Euroboor 1/2UNF-MC3 chuck adapter converts the standard Morse Taper socket on a Euroboor Mag-Drill, to a 1/2″-20 threaded post, ready for any threaded chuck to be attached.
-
Quick ViewEUROBOOR ECO.55-TA MAG DRILL
The Euroboor ECO.55-TA magnetic core drilling machine drills holes with the highest efficiency thanks to its highly intelligent electronics, stable construction and automatic drilling functionality with automatic return for annular cutters. The ECO.55-TA drilling machine is also suitable for tapping up to 13/16″. The machine’s digital display shows the ideal working load and the Smart Restart technology prevents excessive tool wear and failure.
-
Quick ViewEUROBOOR ECO-50S MAGNETIC DRILL PRESS W/ INTEGRATED OIL SYSTEM
Euroboor ECO.50S
Magnetic drilling machine
Ø 12 – 50 mm / 11,2 kg
The Euroboor ECO.50S magnetic core drilling machine converts maximum power through its two speed oil lubricated gearbox. This improves motor efficiency and lifetime of key components. This portable industrial magnetic core drilling machine has an integrated slide which ensures stable support, faster drilling times and more accurate hole sizing. -
Quick ViewEUROBOOR ECO32-T MAG DRILL FOR TAPPING
Need to drill and tap a 1/2″ hole at 42ft high? The ECO.32-T was designed to complete your tailor-made work. At all altitudes. Improved operation and ergonomics will keep you mobile, which is perfect for construction work on site or at the workshop.
-
Quick ViewEUROBOOR ECO32 MAG DRILL
Euroboor ECO.32
Magnetic drilling machine
Ø 12 – 32 mm / 12 kg
The compact Euroboor ECO.32 magnetic core drilling machine has a powerful single speed 1000 W (9.1 A) motor. This portable magnetic core drilling machine is suitable for the use with Weldon twist drills up to 13 mm (1/2″) and countersinks up to 40 mm (1 9/16″). This light and reliable machine is a true addition for every workplace. -
Read MoreQuick ViewEUROBOOR IBC PILOT PINS
Genuine Euroboor pilot pins imported directly from the manufacturer in The Netherlands. These pilot pins are manufactured for use with short short or long Euroboor hole cutters from 1/2″ to 1″ in diameter.
WHOLESALE FASTENER DISTRIBUTOR|
Product Tag - Euroboor
