Euroboor ECO32-T Mag Drill for Tapping
Need to drill and tap a 1/2″ hole at 42ft high? The ECO.32-T was designed to complete your tailor-made work. At all altitudes. Improved operation and ergonomics will keep you mobile, which is perfect for construction work on site or at the workshop.
- Description
- Specifications
- Video
- Single speed gearbox
- Compact design
- Detachable spindle
- Practical long stroke
- Clear and easy controls
- Left & right rotating
- Electronically adjustable rotating speed
Annular Cutters ø 1/2" - 1 1/4"
Twist Drills ø 1/16" - 1/2"
Countersinking ø 3/8" - 1"
Threading ø 1/8" - 1/2"
Length 12 5/8"
Width 8 1/4"
Height 14 9/16" - 20 3/16"
Stroke 5 15/16"
Weight 26.5 lbs
Magnet (L x W x H) 6 5/16" x 3 1/8" x 1 5/8"
Magnetic Force 3300 lbs
Motor Power 9.1 A
Total Power 9.5 A
Speed (no load) 100-600 rpm
Speed (load 1000 W) 225 rpm
Spindle 3/4" Weldon
Voltage 110 - 120 V / 50-60 Hz
Related Products
-
Read MoreQuick ViewEuroboor IBC Pilot Pins
Genuine Euroboor pilot pins imported directly from the manufacturer in The Netherlands. These pilot pins are manufactured for use with short short or long Euroboor hole cutters from 1/2″ to 1″ in diameter.
-
Quick ViewMakita 4-1/2″ Paddle Swtch Grinder w/Cord
Makita’s 4-1/2” Angle Grinder combines 7.5 AMP power with comfort and motor-protection features for longer-lasting industrial performance. The 9557PB Angle Grinder delivers 11,000 RPM, with soft start for smooth start-ups. The Angle Grinder also features a range of durability features including labyrinth construction which seals and protects the motor and bearings from dust and debris for longer tool life, as well as a protective zig-zig varnish engineered to seal the armature from dust and debris.
-
Quick ViewEuroboor Drill Chuck Connection, Morse Taper to Threaded
The Euroboor 1/2UNF-MC3 chuck adapter converts the standard Morse Taper socket on a Euroboor Mag-Drill, to a 1/2″-20 threaded post, ready for any threaded chuck to be attached.
-
Read MoreQuick ViewEuroboor HML 2″ Weldon TCT Carbide Tip Annular Cutter
Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters 2″ with a drill depth of 2″ are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 2″ are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.
-
Sale
Quick ViewHSS 8 PC Imperial – Annular Cutter Set
This set of 6 premium quality industrial grade cutters have superior performance and no compromises. In addition this kit contains 2 pilot pins.
Available in: 1x ø 9/16″ x 30 mm, 9/16″ x 55 mm, 11/16″ x 30 mm, 11/16″ x 55 mm, 13/16″ x 30 mm, 13/16″ x 55 mm -
Quick ViewMakita 5″ Angle Ginder with Paddle Switch
Makita’s 5” SJS™ Angle Grinder combines 13 AMP power and variable speed, with paddle switch comfort and motor-protection features for longer-lasting industrial performance. The 9565PCV is engineered with Makita’s innovative SJS™ mechanical clutch system to protect the gears for longer tool life.
-
Quick ViewMakita 14″ Chop Saw Kit, 18V X2 LXT
The Makita 18V X2 LXT® (36V) Brushless 14″ Cut-Off Saw is a cordless metal-cutting solution ideal for light gauge metals including stud and strut, pipe, all thread, conduit, tubing, rebar, and more. The BL™ Brushless Motor eliminates carbon brushes so it runs cooler and more efficiently for longer life. The Saw is powered by two 18V LXT batteries for maximum cordless performance, and delivers 3,800 RPM for the most demanding metal cutting applications. It will cut up to 5″ round and 4” x 7-5/8” rectangular tubing.
-
Quick ViewMakita 5″ Angle Grinder with SJS Tech
Makita’s 5” SJS™ Angle Grinder combines 13 AMP variable speed power with comfort and motor-protection features for longer-lasting stone grinding and polishing performance. The 9565CV is engineered with Makita’s innovative SJS™ mechanical clutch system to protect the gears for longer tool life.
The 9565CV is a versatile and powerful grinder with variable speed, allowing the user to set the RPM to the material. The variable speed control feature makes the 9565CV ideal for stone work, including polishing and grinding. -
Quick ViewMakita 5-7/8″ Metal Cutting Saw, 18V LXT
Makita is the leader in brushless motor technology, and the 18V LXT® Lithium-Ion Brushless Cordless 5-7/8” Metal Cutting Saw delivers faster metal cutting through Unistrut®, all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more. With a full 2-1/4″ cutting capacity, it is ideal for electrical contractors since it will cut 2” conduit in one pass – a huge time saver. It is also ideal for HVAC, installation, metal building, metal fabrication, plumbing, metal roofing, and for any pro-contractor who requires a best-in-class cordless metal cutting saw.
-
Quick ViewMakita 1/4″ Die Grinder
Makita’s ¼-Inch Die Grinder (model GD0601) combines power and speed with motor-protection features for improved grinding performance. The GD0601 is engineered with a powerful AC/DC motor with 25,000 RPM in a slim body design, and a conveniently located slide-switch for on/off function. This combination of power and ease-of-use features makes the GD0601 ideal for a range of grinding tasks.
