Makita 14″ Chop Saw 15 AMP

Makita 3.0HP Big bore air compressor
Makita 12″ Dual Bevel Sliding Compound Miter Saw

Makita 14″ Chop Saw 15 AMP

The Makita 14” Cut-Off Saw (LW1401) is a metal-cutting solution built for light gauge metal stud and strut, pipe, all thread, conduit, tubing, rebar, and more. The 15 AMP motor delivers 3,800 RPM for the most demanding metal cutting applications. It is engineered to cut up to 5″ round stock, 4-11/16” square tube, and 4” x 7-5/8” or 2-3/4” x 9-1/8” rectangular tubing. It also features fence adjustment up to 45 degrees right or left, and a “tool-less” vice adjustment for increased productivity. The LW1401 weighs only 37 pounds with a locking pin that secures the cutting head in the down position for easy transport and storage. Additional features include a large ergonomic handle and two-stage lock-off power button.

Add to quote
SKU: MAKLW1401 Categories: , Tags: , , , , , , ,
  • Description
  • Features

The Makita 14” Cut-Off Saw (LW1401) is a metal-cutting solution built for light gauge metal stud and strut, pipe, all thread, conduit, tubing, rebar, and more. The 15 AMP motor delivers 3,800 RPM for the most demanding metal cutting applications. It is engineered to cut up to 5" round stock, 4-11/16” square tube, and 4” x 7-5/8” or 2-3/4” x 9-1/8” rectangular tubing. It also features fence adjustment up to 45 degrees right or left, and a “tool-less” vice adjustment for increased productivity. The LW1401 weighs only 37 pounds with a locking pin that secures the cutting head in the down position for easy transport and storage. Additional features include a large ergonomic handle and two-stage lock-off power button.

POWER : Powerful 15 AMP motor delivers 3,800 RPM for superior performance
CONVENIENCE : Adjustable spark guard designed to divert sparks
PRECISION : Fence adjustment up to 45º; adjusts to 3 locations for various material sizes
CAPACITY : Large cutting capacity; cuts up to 5" round and 4" x 7-5/8" rectangular
INCLUDES : Abrasive wheel, wrench

  • Powerful 15 AMP motor delivers 3,800 RPM for superior performance and durability
  • Adjustable spark guard designed to divert sparks
  • Two-stage lock-off power button for operator convenience
  • Fence adjustment up to 45º for angle cuts; adjusts to 3 locations for various material sizes
  • "Tool-less" vice adjustment for quick and easy clamping of material
  • Chain secures cutting head in down position for transport and storage
  • Large ergonomic handle for operator comfort when performing various cutting applications
  • Weights only 37 lbs. for increased job site portability
  • Carrying handle is ergonomically positioned to provide a balanced weight distribution for increased comfort while transporting the saw
  • Wrench stores on base for operator convenience
  • Spindle lock for easy wheel changes

Related Products

  •
    Quick View

    Makita Sub‑Compact 2‑Pc Combo Kit, 18V LXT

    Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX200RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.

    The kit includes an ultra-compact 2-speed brushless driver-drill with two speed settings that weighs only 2.8 lbs., and a variable speed brushless impact driver with two speed settings that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit includes two 18V LXT® Compact 2.0Ah batteries, and each reach a full charge in only 25 minutes on the efficient Rapid Optimum Charger – the fastest charge-time in the category – for less downtime and increased productivity. For added convenience, the batteries feature an integrated L.E.D. battery charge level indicator.

    It’s part of Makita’s expanding 18V LXT® system, the world’s largest cordless tool system powered by 18V Lithium-Ion batteries. Makita 18V LXT® batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

    For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

  •
    Quick View

    Makita Multi‑Tool Kit

    Trades of all kinds are turning to oscillating multi-tools for a full range of applications, and the Makita Multi-Tool (TM3010CX1) combines power and performance with comfort and convenience features like reduced vibration and lower noise. The TM3010CX1 is ideal for cutting, sanding, scraping, tile replacement, grout removal, and more.

    Power and Performance

    The TM3010CX1 is powered by a 3.0 AMP motor with soft start for smooth start-ups. The variable speed control dial (6,000 – 20,000 OPM) enables the user to match the speed to the application, and the electronic speed control maintains constant speed under load for smoother, higher-quality work. The TM3010CX1 has a 3.2 degree oscillation angle engineered for faster, more aggressive cutting and sanding.

    The TM3010CX1 also features a range of comfort and convenience features including reduced vibration (6 m/s²) and lower noise (74dB), a small diameter barrel grip, and a large on/off slide switch with lock-on button. The “tool-less” clamp system provides easier removal and installation of accessories.

    The TM3010CX1 is engineered for a full range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class multi-tool.

  •
    Quick View

    Makita 14″ Chain Saw Kit, LXT 18V X2 (36V)

    Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT® (36V) Brushless Chain Saw Kit (model XCU03PT). With zero emissions, lower noise, and considerably less maintenance, the XCU03PT is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT® batteries for 36V power and run time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw.

    The XCU03PT has a 14” guide bar and the Makita-built motor with variable speed delivers 0-3,940 FPM for increased cutting speed, but with less noise (only 100dB(A)). It has zero emissions and reduced maintenance: there’s no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there’s no need to drain the fuel for storage. Simply pick it up, load two 18V LXT® Lithium-Ion batteries, and the saw is ready to use. Convenience features include a “tool-less” chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.

    It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

    For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

  •
    Quick View

    Makita 2″ Brad Nailer 18 Gauge

    Makita’s 2-inch Brad Nailer features a durable and compact design with ease-of-use features including a narrow-nose design that make it ideal for a wide variety of finish applications.

    The AF505N can operate from 60 to 115 PSI, and drives a range of 18 gauge brad nails from 5/8” to 2-inch. The magazine capacity is up to 100 nails, with a quick release cam-lock to open the nail guide assembly to easily clear jams.

  •
    Quick View

    Makita 3/4″ Impact Wrench w/ Friction Ring Anvil

    Makita 6906 9 Amp 3/4-in Impact Wrench has a 9 AMP motor and 433 ft.lbs. of Max Torque for industrial applications like automotive or stubborn/stuck bolts. The 6906 has precision gearing plus ball and needle bearing construction for smooth and efficient power transmission. The rocker switch is designed for quickly switching from forward to reverse. The 6906 also includes a steel case and side handle.

  •
    Quick View

    Makita Subcompact Impact /Hammer Drill Kit, 18V LXT

    Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX202RB is a combo kit with two 18V Sub-Compact solutions for drilling, driving and fastening.

    The kit includes an ultra-compact 2-speed brushless hammer driver-drill with two speed settings that weighs only 2.8 lbs. The percussive hammer-drill setting allows for drilling into masonry and brick. The variable speed brushless impact driver has two speed settings and weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit includes two 18V LXT® Compact 2.0Ah batteries,which feature an integrated L.E.D. battery charge level indicator.   

  •
    Quick View

    Makita 2-1/2″ Coil Siding Nailer

    The Makita 2-1/2″ Siding Coil Nailer combines rugged construction with ease-of-use features for improved performance. The AN611 accepts 1-1/4” to 2-1/2” nails (.080 – .099 shank diameter) with a 300-400 magazine capacity and an easy-loading canister with nail size adjustment. The AN611 has a 3-mode selector switch (contact, sequential, lock) that is engineered for increased user control and convenience. Additional features include a “tool-less” depth adjustment with 9 depth settings, and sharp spurs that grip the wood for increased control at an angle.

  •
    Quick View

    Makita 3-1/2″ Stick Framing Nailer

    The 21º Full Round Head 3-1/2″ Framing Nailer combines durable construction and robust performance with ease-of-use features for wood framing applications. The AN924 is engineered for a range of applications including framing walls, floors and roofs, as well as construction of roof and floor decking, floor and wall sheathing/siding, and sub-flooring. It is ideal for framers, roofers and carpenters.

  •
    Quick View

    Makita Subcompact Impact /Drill Driver Kit, 18V LXT

    Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX200RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.

    The kit includes an ultra-compact 2-speed brushless driver-drill with two speed settings that weighs only 2.8 lbs., and a variable speed brushless impact driver with two speed settings that weighs only 2.6 lbs. There are also two 18V LXT® Compact 2.0Ah batteries, which feature an integrated L.E.D. battery charge level indicator.

  •
    Quick View

    Makita Couple Shaft Bristle Brush Attachment 23-5/8″

    The Makita Bristle Brush Couple Shaft Attachment is the perfect accessory for Makita 18V X2 LXT (36V) and MM4 4-Stroke Engine Couple Shaft Power Heads (sold separately). The Bristle Brush Couple Shaft Attachment features a wide sweeping surface of 23-5/8” and durable nylon bristles for optimum performance. The steel drive shaft reduces vibration and increases equipment life.