Power Tools

  • MAKITA QUIET SERIES AIR COMPRESSOR, 1.5HP, 3 GALLON

    Compressors are workhorse tools on the job site and in the work shop. Makita® Air Compressors are favorites for their faster recovery time, lower noise, longer tool life, and consistent performance.
    The Makita® Quiet Series 1-1/2 HP, 3 Gallon, Oil-Free, Electric Air Compressor (MAC320Q) features a Quiet Series Design, combining strong performance with lower noise. At only 60 dBA, it’s ideal for indoor use during case and base installation, trim and finish carpentry, cabinet or furniture making, and more. The MAC320Q runs at a lower RPM, resulting in longer motor and pump life. It is powered by an efficient 1-1/2 horsepower induction motor that provides up to 90 PSI. It also features a lightweight design (only 52.5 lbs.) for increased portability.

  • MAKITA 17″ LAWN MOWER KIT, 18V X2 LXT

    There is increasing demand for more alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE that includes the 18V X2 (36V) LXT® Lithium-Ion 17” Lawn Mower. With zero emissions, lower noise and none of the maintenance associated with gas power equipment, the 18V X2 (36V) Cordless Lawn Mower is a welcome solution for efficient grass cutting. It’s powered by two 18V LXT® batteries for maximum power and run time, but without leaving the 18V battery platform. The Makita-built motor delivers 3,600 RPM, and the Mower offers ease-of-use features including quick height adjustments, a 13 gallon capacity grass collector, and a full 17” cutting width.
    Model XML02PT is a kit and includes the Lawn Mower, two fast-charging 18V LXT® Lithium-Ion 5.0Ah batteries and an efficient 18V Dual Port Rapid Optimum Charger.
    The Lawn Mower features Makita Extreme Protection Technology (XPT™). XPT™ is a protective seal inside the tool, and is engineered for improved operation in harsh conditions by channeling water and dust from key internal components.

  • MAKITA 9″ CUT OFF / ANGLE GRINDER , 18V X2 LXT

    Makita delivers corded grinding performance without the cord with the 18V X2 (36V) LXT® Lithium-Ion Brushless 9” Paddle Switch Cut-Off/Angle Grinder with Electric Brake and AWS™ (XAG23ZU1 tool only). It’s powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. For the most demanding applications, Makita’s exclusive Automatic Speed Change™ technology automatically adjusts speed and torque during operation for optimal performance. The XAG23ZU1 is ideal for grinding and cutting a wide range of materials including tile, concrete, pipe, conduit, and more.
    For improved efficiency, it’s equipped with Auto-Start Wireless System (AWS™) technology. AWS™ utilizes Bluetooth® technology for wireless communication between the tool and dust extractor (sold separately). When the trigger is engaged, the AWS™-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS™ is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running.

  • MAKITA GUIDE RAIL CONNECTOR

    The Makita Guide Rail Connectors are designed to join guide rails together to allow the user to make longer cuts while maintaining the accuracy they desire. The connectors install quickly for added convenience. These versatile connectors work with Makita guide rails as well as select competitor rails.

  • MAKITA DML 809 ADJUSTABLE BEAM WORK LIGHT, 18V LXT

    The Makita® Portable Tripod Light Stand (GM00002073) is a durable and convenient elevated stand for up to two Cordless/Corded Work Lights (DML809 and DML811, sold separately). The Tripod Stand has a durable metal construction for longer life and sturdy three-legged design for maximum stability. The Tripod Stand telescopes up to 76” and allows for easy 360° rotation of the light. It collapses for optimal portability when the job is through.

  • MAKITA IMPACT XPS 60 PC BIT KIT

    Makita® Impact XPS™ is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. The ImpactXPS Power Bits are designed exclusively for use with high-torque impact drivers, and are engineered to last up to 90-times longer than standard bits. 
    High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent “cam-out” and stripping. The torsion section of the bit flexes under load to take pressure off of the bit tip for increased durability. The high quality steel construction is engineered for increased durability and features a matte nickel surface for best in class corrosion resistance.
    ImpactXPS Power Bits are ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more.

  • MAKITA DML811 WORK LIGHT, AC & 18V LXT

    The 18V LXT® Lithium-Ion Cordless/Corded Work Light (DML811) offers the convenience of cordless or corded operation, and provides bright and even illumination for work spaces. At full brightness it provides 3,000 lumens of light, and 750 lumens on low mode. Adjusting knobs enable the user to direct the light to the desired angle. The Work Light can be mounted on an optional tripod stand (sold separately). Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions.
    The fast-charging 18V LXT Lithium-Ion 5.0Ah Battery (sold separately) delivers 11 hours of continuous illumination on the low setting.

  • MAKITA DML810 WOBBLE LIGHT, AC & 18V LXT

    The 18V X2 LXT® Cordless/Corded Upright L.E.D. Area Light (DML810) is a self-righting light that stays in an upright position. The flood light features a self-balancing design that keeps the light in an upright position, even when knocked over, and delivers 5,500 / 3,000 / 1,500 lumens on High / Medium / Low.
    L.E.D. lights effectively illuminate work area without the high heat of halogens and incandescent lights. This light illuminates 360 degrees for full illumination of the space, or 180 degrees to the left or right.

  • MAKITA XENON BLACK FLASHLIGHT, 18V LXT

    The 18V X2 LXT® Lithium-Ion Cordless/Corded Work Light (DML809) offers the convenience of cordless or corded operation, and provides bright and even illumination for work spaces. At full brightness it provides 10,000 lumens of light, and 2,000 lumens on low mode. Adjusting knobs enable the user to direct the light to the desired angle. The Work Light can be mounted on an optional tripod stand (sold separately). Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions.

    The fast-charging 18V LXT® Lithium-Ion 5.0Ah Battery (sold separately) delivers 8.5 hours of continuous illumination on the low setting.

  • MAKITA 55″ GUIDE RAIL FOR USE WITH PLUNGE SAW

    The Makita 55″ Plunge Saw Guide Rail (194368-5), when used with a Makita Plunge Circular Saw (SP6000) is a more portable option to a table saw for ripping sheet material. The Guide Rail interacts with the Plunge Saw (not included) to provide smooth, dead-on straight cuts. For use with the Makita 6-1/2 in. Plunge Circular Saws (models SP6000K/K1 and SP6000J/J1).

  • MAKITA XRM11 BLUETOOTH JOBSITE SPEAKER, 18V XLT

    Users can surround themselves with music, on or off the job site, with the new Makita® 18V LXT® / 12V max CXT® Cordless Bluetooth Job Site Speaker. Two speakers can be connected to listen in true stereo sound or connect up to ten speakers wirelessly to hear music throughout the job site. The speaker delivers rich full sound from one 4″ woofer with a passive radiator and one 1.4″ tweeter.
    Compatible with a 12V max CXT and 18V LXT Lithium-Ion Batteries (sold separately), this radio provides more flexibility for users. An included AC Adapter offers corded operation.

  • MAKITA 5-7/8 METAL CUTTING SAW, 18V LXT

    The 18V LXT® Brushless Cordless 5-7/8” Metal Cutting Saw (XSC04) delivers faster metal cutting through Unistrut®, all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more. With a full 2-1/4″ cutting capacity, it is ideal for electrical contractors as it will cut 2” conduit in one pass – a huge time saver. It includes a transparent chip collector box to capture cutting debris. The brushless motor is engineered for efficiency, and in run-time testing the Saw made up to 125 cuts per charge in 1” SCH 40 pipe using an 18V 5.0Ah battery.
    Makita offers optimum 5-7/8″ blade options for use with the XSC04: 32T carbide tipped for metal and general purpose; 52T for thin metal; 52T for aluminum; and 60T for stainless steel (all sold separately).