Machine Screws – Phillips, Pan, Zinc Plated
Machine screws are meant to hold two metal work pieces together, with the use of a threaded pre-tapped hole, or through a hole and held with a nut. They are threaded the entire length of the shank. For most styles of a machine screw, the length is measured from under the head to the end of the screw. For flat head machine screws, since they are intended to fit into a countersunk hole, their length is measured from the top of the screw head to the end of the screw.
- Additional information
- Description
Additional information
Diameter | #2-56, #3-48, #4-40, #6-32, #8-32, #10-24, #10-32, #12-24, 1/4″-20, 5/16″-18, 1/2″-13, 3/8″-16 |
---|---|
Length | 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-1/2″, 1-3/4″, 2″, 2-1/4″, 2-1/2″, 2-3/4″, 2-7/8″, 3″, 3-1/4″, 3-1/2″, 4″, 4-1/2″, 5″, 5-1/2″, 6″ |
Machine screws are meant to hold two metal work pieces together, with the use of a threaded pre-tapped hole, or through a hole and held with a nut. They are threaded the entire length of the shank. For most styles of a machine screw, the length is measured from under the head to the end of the screw. For flat head machine screws, since they are intended to fit into a countersunk hole, their length is measured from the top of the screw head to the end of the screw.
Related Products
-
HotQuick View
Finished Hex Nuts – Grade 5
Grade 5 hex nuts have internal machine threads, for use with machine thread bolts and screws. The most versatile and widely used nut. ANSI B1.1 UNC and UNF Class 2B thread requirement. Zinc plating, retards the corrosion rate in a normal atmosphere.
-
Read MoreQuick View
Sheet Metal Screws – Phillips, Oval, Stainless Steel
Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. The point style determines the type of material the screw can be used on, such as metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material.
-
Read MoreQuick View
Machine Screws
Machine screws are meant to hold two metal work pieces together, with the use of a threaded pre-tapped hole, or through a hole and held with a nut. They are threaded the entire length of the shank. For most styles of a machine screw, the length is measured from under the head to the end of the screw. For flat head machine screws, since they are intended to fit into a countersunk hole, their length is measured from the top of the screw head to the end of the screw.
-
Read MoreQuick View
Machine Screws – Phillips, Flat, Zinc Plated
Machine screws are meant to hold two metal work pieces together, with the use of a threaded pre-tapped hole, or through a hole and held with a nut. They are threaded the entire length of the shank. For most styles of a machine screw, the length is measured from under the head to the end of the screw. For flat head machine screws, since they are intended to fit into a countersunk hole, their length is measured from the top of the screw head to the end of the screw.
-
HotQuick View
Finished Hex Nuts – Grade 8: Yellow Zinc
Grade 8 hex nuts have internal machine threads, for use with machine thread bolts and screws. Yellow Zinc offers a modest amount of corrosion resistance, slightly higher than that of clear zinc.
-
Read MoreQuick View
Sheet Metal Screws – Slotted, Hex Head, Stainless Steel 18-8
Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. The point style determines the type of material the screw can be used on, such as metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material.
-
Read MoreQuick View
Sheet Metal Screws – Phillips, Flat, Zinc Plated
Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. The point style determines the type of material the screw can be used on, such as metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material.
-
Read MoreQuick View
Sheet Metal Screws – Phillips, Truss, Stainless Steel 18-8
Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. The point style determines the type of material the screw can be used on, such as metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material.
-
HotQuick View
Plow Bolts – Grade 5
Plow bolts are used for attaching the cutting edge of a plow to the plow blade. A tempered medium carbon steel. Grade 5 falls between grade 2 and grade 8 in strength, and is commonly found in automotive applications.
-
Read MoreQuick View
Machine Screws – Combo, Truss, Zinc Plated
Machine screws are meant to hold two metal work pieces together, with the use of a threaded pre-tapped hole, or through a hole and held with a nut. They are threaded the entire length of the shank. For most styles of a machine screw, the length is measured from under the head to the end of the screw. For flat head machine screws, since they are intended to fit into a countersunk hole, their length is measured from the top of the screw head to the end of the screw.