Euroboor ECO32 Mag Drill
Euroboor ECO.32
Magnetic drilling machine
Ø 12 – 32 mm / 12 kg
The compact Euroboor ECO.32 magnetic core drilling machine has a powerful single speed 1000 W (9.1 A) motor. This portable magnetic core drilling machine is suitable for the use with Weldon twist drills up to 13 mm (1/2″) and countersinks up to 40 mm (1 9/16″). This light and reliable machine is a true addition for every workplace.
- Description
- Technical Data
- Video
The Euroboor ECO.32 mag drill is a very dependable machine. The fact that it has a single speed motor and one-speed gearbox means there are far fewer options for things to break. It also utilizes an integrated tool cooling and lubrication system to keep the drill bits sharp and to avoid overheating.
The high-precision height adjustment makes for minimal wear correction, and lower overall maintenance. Finally, it has a very strong dual coil magnet that is CNC machined for an exact fit, and a LED indicator that the magnet is functioning.
Metric
Annular cutting Ø 12 - 32 mm
Twist drilling Ø 1 - 13 mm
Countersinking Ø 10 - 40 mm
Length 320 mm
Width 210 mm
Height 370 - 512 mm
Stroke 150 mm
Weight 12 kg
Magnet (l x w x h) 160 x 80 x 42 mm
Magnetic force 1500 kg
Motor power 1000 W
Total power 1050 W
Speed (no load) 775 rpm
Speed (load 1000 W) 440 rpm
Spindle (Weldon) 19,05 mm
Voltage 110 - 120 V / 60 Hz
220 - 240 V / 50 - 60 Hz
Imperial
Annular cutting Ø 7/16" - 1 1/4"
Twist drilling Ø 1/16" - 1/2"
Countersinking Ø 3/8" - 1 9/16"
Length 12 5/8"
Width 8 1/4"
Height 14 9/16" - 20 3/16"
Stroke 5 15/16"
Weight 26.5 lbs
Magnet (l x w x h) 6 5/16" x 3 1/8" x 1 5/8"
Magnetic force 3305 lbs
Motor power 9.1 A
Total power 9.5 A
Speed (no load) 775 rpm
Speed (load 9.1 A) 440 rpm
Spindle (Weldon) 3/4"
Voltage 110 - 120 V / 60 Hz
220 - 240 V / 50 - 60 Hz
Related Products
-
Quick ViewMakita 7″ Trigger Handle Grinder
The Makita 7 in. Angle Grinder is built around a powerful 15 Amp motor that delivers up to 6,600 RPM for fast stock removal. It features labyrinthine construction that helps seal internal components from outside contaminants to help increase tool life.
The easy-to-use large trigger switch locks on for extended operation, and a large shaft lock permits easy wheel changes. The switch handle rotates 90 degrees left and right, while the side handle may be configured in any of 3 positions to promote user comfort and control. A 7 in. grinding wheel is included. -
Quick ViewEuroboor Cobalt 29 Pc Index Jobber Set
The Euroboor M35 Cobalt High Speed Steel Jobber drill set is ideal for drilling through cast iron and stainless steel. The 135° split point helps to eliminate tip walking, and increases hole accuracy. The unique flute design is superior for removing shavings and material from the hole. All bits above 3/16″ have a 3-flat shank for stability in any drill or chuck.
-
Quick ViewMakita 5″ Angle Grinder with SJS Tech
Makita’s 5” SJS™ Angle Grinder combines 13 AMP variable speed power with comfort and motor-protection features for longer-lasting stone grinding and polishing performance. The 9565CV is engineered with Makita’s innovative SJS™ mechanical clutch system to protect the gears for longer tool life.
The 9565CV is a versatile and powerful grinder with variable speed, allowing the user to set the RPM to the material. The variable speed control feature makes the 9565CV ideal for stone work, including polishing and grinding. -
Quick ViewMakita 7″ Loop Handle Polisher
Automotive detailers, marine enthusiasts and stone polishers rely on Makita polishers for high-quality detailing and polishing. The 7” Polisher Model 9237C combines consistent power and speed control with new durability and performance features. The result is a fast and powerful polisher for clear coat finishes, stone polishing, and more.
Detailers will appreciate the variable speed dial and trigger so they can match the speed to the application, and the constant speed control is engineered to maintain consistent speed even under load. The 9237C has a rubberized loop handle that provides added comfort for users and added protection for delicate work surfaces. For increased durability, the Polisher has a wire mesh intake cover to prevent wool bonnet fibers and other debris from entering the motor. -
Read MoreQuick ViewEuroboor IBC Pilot Pins
Genuine Euroboor pilot pins imported directly from the manufacturer in The Netherlands. These pilot pins are manufactured for use with short short or long Euroboor hole cutters from 1/2″ to 1″ in diameter.
-
Quick ViewMakita 5-7/8″ Metal Cutting Saw, 18V LXT
Makita is the leader in brushless motor technology, and the 18V LXT® Lithium-Ion Brushless Cordless 5-7/8” Metal Cutting Saw delivers faster metal cutting through Unistrut®, all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more. With a full 2-1/4″ cutting capacity, it is ideal for electrical contractors since it will cut 2” conduit in one pass – a huge time saver. It is also ideal for HVAC, installation, metal building, metal fabrication, plumbing, metal roofing, and for any pro-contractor who requires a best-in-class cordless metal cutting saw.
-
Quick ViewEuroboor Drill Chuck Connection, Morse Taper to Threaded
The Euroboor 1/2UNF-MC3 chuck adapter converts the standard Morse Taper socket on a Euroboor Mag-Drill, to a 1/2″-20 threaded post, ready for any threaded chuck to be attached.
-
Read MoreQuick ViewEuroboor HML 2″ Weldon TCT Carbide Tip Annular Cutter
Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters 2″ with a drill depth of 2″ are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 2″ are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.
-
Read MoreQuick ViewEuroboor HCS 1″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 1″ with a drill depth of 1″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 1″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 1″ from penetrating the second layer of material.
-
Quick ViewMakita 4-1/2″ Paddle Swtch Grinder w/Cord
Makita’s 4-1/2” Angle Grinder combines 7.5 AMP power with comfort and motor-protection features for longer-lasting industrial performance. The 9557PB Angle Grinder delivers 11,000 RPM, with soft start for smooth start-ups. The Angle Grinder also features a range of durability features including labyrinth construction which seals and protects the motor and bearings from dust and debris for longer tool life, as well as a protective zig-zig varnish engineered to seal the armature from dust and debris.
