Makita 1/4″, 3/8″ Threaded Rod Cutter, 18V LXT
Makita has delivered a cordless cutting solution for steel rod cutting with the 18V LXT® Brushless Cordless Threaded Rod Cutter. It will make up to 1,300 cuts of 3/8” coarse thread threaded rod and 1,200 cuts of 3/8” coarse thread stainless steel threaded rod with a 5.0Ah battery (sold separately). The compact design makes the XCS03Z ideal for overhead cutting of installed threaded rod. Provides spark-free cuts that are clean and burr-free allowing easy hand-threading of fastener or nut.
- Description
- Features
Makita has delivered a cordless cutting solution for steel rod cutting with the 18V LXT® Brushless Cordless Threaded Rod Cutter (XCS03Z, tool only). It will make up to 1,300 cuts of 3/8” coarse thread threaded rod and 1,200 cuts of 3/8” coarse thread stainless steel threaded rod with a 5.0Ah battery (sold separately). The compact design makes the XCS03Z ideal for overhead cutting of installed threaded rod. Provides spark-free cuts that are clean and burr-free allowing easy hand-threading of fastener or nut.
APPLICATIONS : Ideal for overhead cutting of installed threaded rod including 1/4" and 3/8" coarse thread sizes
DESIGN : Spark-free cuts that are clean and burr-free for easy hand-threading of fastener
PRODUCTIVITY : Automatic blade stop mechanism returns blade to open position once cut is complete
ERGONOMICS : Ergonomically designed handle provides a more comfortable hand position for less fatigue
INCLUDES : Wrench and tool case (battery and charger not included)
- Provides spark-free cuts that are clean and burr-free for easy hand-threading of fastener or nut
- Up to 1,300 cuts of 3/8” mild steel threaded rod and 1,200 cuts of 3/8” stainless steel threaded rod with one 18V LXT 5.0Ah battery (battery not included)
- Ideal for overhead cutting of installed threaded rod including 1/4" and 3/8" coarse thread diameter sizes
- Ergonomically designed handle provides a more comfortable hand position for increased comfort and less fatigue
- Compact design at only 7-7/8" long and weighs only 7 lbs. with battery (battery not included)
- Automatic blade stop mechanism returns blade to open position once cut is complete to continue operation
- Integrated two-position threaded rod guide helps stabilize material for precise cuts
- L.E.D. light with afterglow illuminate the work area for increased visibility
- Retractable hook allows tool to remain close by, but not in the way
- Rubberized soft grip provides increased comfort on the job
- Equipped with shoulder strap hook for maximum portability
- Includes reversible double-edged cutting dies for twice the life of the blade
- On-board hex wrench storage for fast and convenient blade changes
- 3-year limited warranty
Related Products
-
Makita 2.6 Gallon Pressurized Water Tank
The Makita 2.6 Gallon Pressuriezed Water Tank is designed to be used with gas power saws, while making cuts in masonry materials with a wet-use diamond blade. Each tank is made of durable, lightweight poly-carbonate for added durability and a long life. The large 2.6 gallon capacity means less frequent refills and reduced downtime.
-
Makita Couple Shaft Bristle Brush Attachment 23-5/8″
The Makita Bristle Brush Couple Shaft Attachment is the perfect accessory for Makita 18V X2 LXT (36V) and MM4 4-Stroke Engine Couple Shaft Power Heads (sold separately). The Bristle Brush Couple Shaft Attachment features a wide sweeping surface of 23-5/8” and durable nylon bristles for optimum performance. The steel drive shaft reduces vibration and increases equipment life.
-
Makita Subcompact 11/16″ SDS‑PLUS Rotary Hammer Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V run time and compatibility with the world’s largest 18V cordless tool system. The 18V LXT® Sub-Compact Brushless 11/16” Rotary Hammer (accepts SDS-PLUS bits) is ideal for working in tight spaces and for overhead conditions.
The XRH06RB has an efficient Makita BL™ Brushless Motor for up to 50% longer run time, increased power and speed, and longer tool life. It has 2-mode operation for “rotation only” or “hammering with rotation”, with 0-680 RPM, 0-4,800 BPM and .88 ft.lbs./1.2 Joules of impact energy for fast and efficient drilling. The compact size and lower weight mean reduced fatigue for operators, especially for overhead applications. Additional features include a vibration-absorbing handle that moves independently of the motor and hammer mechanism for increased operator comfort, as well as a variable speed trigger, built-in L.E.D. lights, and one-touch sliding chuck for easy bit changes.
It’s part of Makita’s expanding 18V LXT® system, the world’s largest cordless tool system powered by 18V Lithium-Ion batteries. Makita 18V LXT® batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
-
Makita 7-1/4″ Circular Saw
Makita engineered the 7-1/4” Circular Saw (model 5007F) with pro framers in mind, combining power and performance with ease-of-use features, superior balance, and job site durability. The 5007F is ideal for a range of framing and cutting applications.
The 5007F is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, masons, carpenters, and general contractors seeking a best-in-class 7-1/4” circular saw. -
Makita Sub‑Compact 2‑Pc Combo Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX200RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless driver-drill with two speed settings that weighs only 2.8 lbs., and a variable speed brushless impact driver with two speed settings that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit includes two 18V LXT® Compact 2.0Ah batteries, and each reach a full charge in only 25 minutes on the efficient Rapid Optimum Charger – the fastest charge-time in the category – for less downtime and increased productivity. For added convenience, the batteries feature an integrated L.E.D. battery charge level indicator.
It’s part of Makita’s expanding 18V LXT® system, the world’s largest cordless tool system powered by 18V Lithium-Ion batteries. Makita 18V LXT® batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
-
Makita Subcompact Radio /Impact /Driver Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX301RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless driver-drill that weighs only 2.8 lbs., and a variable speed brushless impact driver that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit also includes an 18V LXT® Job Site Radio with Bluetooth® and MP3 compatibility. The kit includes two 18V LXT® Compact 2.0Ah batteries, which feature an integrated L.E.D. battery charge level indicator.
-
Makita 5″ Angle Ginder with Paddle Switch
Makita’s 5” SJS™ Angle Grinder combines 13 AMP power and variable speed, with paddle switch comfort and motor-protection features for longer-lasting industrial performance. The 9565PCV is engineered with Makita’s innovative SJS™ mechanical clutch system to protect the gears for longer tool life.
-
Makita 5″ Random Orbit Sander, 12,000 OPM
Makita’s 5-Inch Random Orbit Sander delivers fast, smooth performance with better grip and control. The BO5030 is ideal for woodworkers and finish carpenters who require a best-in-class random orbit sander. It features a pad control system for controlled pad speed upon start up, with a powerful 3 AMP motor for continuous operation, 1/8-inch random orbit action, and 12,000 OPM for fast and smooth sanding. The BO5030 is precision engineered with all ball bearing construction for longer tool life.
-
Makita Multi‑Tool Kit
Trades of all kinds are turning to oscillating multi-tools for a full range of applications, and the Makita Multi-Tool (TM3010CX1) combines power and performance with comfort and convenience features like reduced vibration and lower noise. The TM3010CX1 is ideal for cutting, sanding, scraping, tile replacement, grout removal, and more.
Power and Performance
The TM3010CX1 is powered by a 3.0 AMP motor with soft start for smooth start-ups. The variable speed control dial (6,000 – 20,000 OPM) enables the user to match the speed to the application, and the electronic speed control maintains constant speed under load for smoother, higher-quality work. The TM3010CX1 has a 3.2 degree oscillation angle engineered for faster, more aggressive cutting and sanding.
The TM3010CX1 also features a range of comfort and convenience features including reduced vibration (6 m/s²) and lower noise (74dB), a small diameter barrel grip, and a large on/off slide switch with lock-on button. The “tool-less” clamp system provides easier removal and installation of accessories.
The TM3010CX1 is engineered for a full range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class multi-tool.
-
Makita 10.1 Oz Cartridge Holder
This 360° rotatable cartridge holder fits 10 oz. and 300 ml cartridges, and includes all you need to utilize 10oz. cartridge style containers. It is made of lightweight, high quality material.