Makita 2.1 Gallon Hybrid HEPA Dust Extractor Vacuum, 18V X2 LXT
Clean-ups just got easier with the Makita 18V X2 LXT® Lithium-Ion (36V) Cordless/Corded 2.1 Gallon Dry Vacuum. The XCV04Z offers corded or cordless operation for maximum versatility and convenience.
In cordless operation, the XCV04Z is powered by two 18V LXT® batteries for 36V power and run-time, without leaving the 18V LXT® battery platform. Using two 18V 5.0Ah batteries (sold separately), the XCV04Z delivers up to 65 minutes of continuous run time on low setting and 30 minutes on high setting, with 74 CFM and 36” water lift of suction.
In corded operation, the vacuum delivers 127 CFM and 96” water lift. The 19.7′ power cord combined with the anti-static hoses (1-1/2″ x 8′ or 1” x 11-1/2′, both included) provide extended reach for fast clean-ups.
- Description
- Features
Clean-ups just got easier with the Makita 18V X2 LXT® Lithium-Ion (36V) Cordless/Corded 2.1 Gallon Dry Vacuum. The XCV04Z offers corded or cordless operation for maximum versatility and convenience.
In cordless operation, the XCV04Z is powered by two 18V LXT® batteries for 36V power and run-time, without leaving the 18V LXT® battery platform. Using two 18V 5.0Ah batteries (sold separately), the XCV04Z delivers up to 65 minutes of continuous run time on low setting and 30 minutes on high setting, with 74 CFM and 36” water lift of suction.
In corded operation, the vacuum delivers 127 CFM and 96” water lift. The 19.7' power cord combined with the anti-static hoses (1-1/2" x 8' or 1” x 11-1/2', both included) provide extended reach for fast clean-ups.
The XCV04Z has a 3-stage filtration system engineered for efficient cleaning and to extend the life of the main filter. The system consists of a Pre-Filter Bag (captures larger dust particulates), Damper Filter (captures much smaller particulates) and Main Filter (captures micro particles). All three filter components are included.
The XCV04Z is loaded with ease-of-use features. The oversize on-off switch, variable speed control dial, and dual L.E.D. battery indicators are clearly visible and easily accessible on the top and front of the vacuum. Additional features include quick-release metal latches, large rubber bumper, and rear casters with locking levers.
POWER : Delivers 127 CFM and 96" water lift
RUN TIME : Up to 65 minutes of continuous run time using two 18V LXT® 5.0Ah batteries (batteries not included)
EFFICIENCY : Three stage HEPA filtration system captures 99.97% of particulates .3 microns and larger
VERSATILITY : 18V X2 LXT® Lithium-Ion cordless and corded options for convenience
INCLUDES : (2) Anti-static hose, crevice tool, nozzle, curved pipe, straight pipe, main filter, damper and pre-filter (battery and charger not included)
- Powerful Makita-built motor delivers 127 CFM and 96" water lift of suction using corded power
- Powerful Makita-built motor delivers 74 CFM and 36" water lift of suction using two 18V LXT® Lithium-Ion batteries
- Up to 65 minutes of continuous run time on low setting and 30 minutes on high setting using two 18V LXT® Lithium-Ion 5.0Ah batteries BL1850B
- Efficient three stage HEPA filtration system captures 99.97% of particulates .3 microns and larger extending the life of the main filter
- Filter cleaning system is designed to maintain optimum suction efficiency and longer filter life
- Precision lightweight motor components and efficient air ducting produce a vacuum weight of only 21.8 lbs with batteries
- Oversized on-off switch for operator convenience
- Motor chamber constructed of quality sound-absorbing materials for quiet operating sound levels; 75 dB(A) using corded power and 64 dB(A) using battery power
- Variable speed control dial for a variety of applications
- Large rubber bumper helps prevent damage to the work environment
- Locking cover for added protection of batteries (batteries not included)
- Equipped with 19.7' cord and two anti-static hoses (1-1/2" x 8’ and 1” x 11-1/2') for extended reach
- Quick-release metal latches for easy removal and disposal of debris from canister
- Rear casters feature locking levers to prevent the vacuum from moving
- Removable storage box for storing attachments, batteries and cord rack
- Dual L.E.D. battery indicators show charge level for each 18V LXT® Lithium-Ion battery
- Includes (2) Anti-static hose, crevice tool, nozzle, curved pipe, straight pipe, main filter, damper and pre-filter
- Vacuum only, batteries and charger not included
- 3-year limited warranty
Related Products
-
Makita Multi‑Tool Kit
Trades of all kinds are turning to oscillating multi-tools for a full range of applications, and the Makita Multi-Tool (TM3010CX1) combines power and performance with comfort and convenience features like reduced vibration and lower noise. The TM3010CX1 is ideal for cutting, sanding, scraping, tile replacement, grout removal, and more.
Power and Performance
The TM3010CX1 is powered by a 3.0 AMP motor with soft start for smooth start-ups. The variable speed control dial (6,000 – 20,000 OPM) enables the user to match the speed to the application, and the electronic speed control maintains constant speed under load for smoother, higher-quality work. The TM3010CX1 has a 3.2 degree oscillation angle engineered for faster, more aggressive cutting and sanding.
The TM3010CX1 also features a range of comfort and convenience features including reduced vibration (6 m/s²) and lower noise (74dB), a small diameter barrel grip, and a large on/off slide switch with lock-on button. The “tool-less” clamp system provides easier removal and installation of accessories.
The TM3010CX1 is engineered for a full range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class multi-tool.
-
Makita 10.1 Oz Cartridge Holder
This 360° rotatable cartridge holder fits 10 oz. and 300 ml cartridges, and includes all you need to utilize 10oz. cartridge style containers. It is made of lightweight, high quality material.
-
Makita Subcompact Impact /Hammer Drill Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX202RB is a combo kit with two 18V Sub-Compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless hammer driver-drill with two speed settings that weighs only 2.8 lbs. The percussive hammer-drill setting allows for drilling into masonry and brick. The variable speed brushless impact driver has two speed settings and weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit includes two 18V LXT® Compact 2.0Ah batteries,which feature an integrated L.E.D. battery charge level indicator.
-
Makita 7″ Loop Handle Polisher
Automotive detailers, marine enthusiasts and stone polishers rely on Makita polishers for high-quality detailing and polishing. The 7” Polisher Model 9237C combines consistent power and speed control with new durability and performance features. The result is a fast and powerful polisher for clear coat finishes, stone polishing, and more.
Detailers will appreciate the variable speed dial and trigger so they can match the speed to the application, and the constant speed control is engineered to maintain consistent speed even under load. The 9237C has a rubberized loop handle that provides added comfort for users and added protection for delicate work surfaces. For increased durability, the Polisher has a wire mesh intake cover to prevent wool bonnet fibers and other debris from entering the motor. -
Makita 3/4″ Impact Wrench w/ Friction Ring Anvil
Makita 6906 9 Amp 3/4-in Impact Wrench has a 9 AMP motor and 433 ft.lbs. of Max Torque for industrial applications like automotive or stubborn/stuck bolts. The 6906 has precision gearing plus ball and needle bearing construction for smooth and efficient power transmission. The rocker switch is designed for quickly switching from forward to reverse. The 6906 also includes a steel case and side handle.
-
Makita Subcompact Radio /Impact /Driver Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX301RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless driver-drill that weighs only 2.8 lbs., and a variable speed brushless impact driver that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit also includes an 18V LXT® Job Site Radio with Bluetooth® and MP3 compatibility. The kit includes two 18V LXT® Compact 2.0Ah batteries, which feature an integrated L.E.D. battery charge level indicator.
-
Makita 7-1/4″ Magnesium Circular Saw
The Makita 5007MG 7-1/4 in. Magnesium Circular Saw features highly durable magnesium components and a powerful 15 AMP Makita-built industrial motor. The 5007MG seamlessly balances weight, power, durability, and ease of use, making it the most refined circular saw on the market. A built-in dust blower clears the line of cut for more accurate and precise cuts.
The 5007MG is built for framing walls, floors and roofs using a range of dimensional lumber and dense engineered lumber, including LVL, PSL and I-Joists, headers, and microlams; as well as ripping panels such as plywood, OSB, particle board, and dense structural panels. Other applications include plunge and bevel cutting. -
Makita 7-1/4″ Circular Saw
Makita engineered the 7-1/4” Circular Saw (model 5007F) with pro framers in mind, combining power and performance with ease-of-use features, superior balance, and job site durability. The 5007F is ideal for a range of framing and cutting applications.
The 5007F is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, masons, carpenters, and general contractors seeking a best-in-class 7-1/4” circular saw. -
Makita 4-1/2″ Paddle Swtch Grinder w/Cord
Makita’s 4-1/2” Angle Grinder combines 7.5 AMP power with comfort and motor-protection features for longer-lasting industrial performance. The 9557PB Angle Grinder delivers 11,000 RPM, with soft start for smooth start-ups. The Angle Grinder also features a range of durability features including labyrinth construction which seals and protects the motor and bearings from dust and debris for longer tool life, as well as a protective zig-zig varnish engineered to seal the armature from dust and debris.
-
Makita 2.6 Gallon Pressurized Water Tank
The Makita 2.6 Gallon Pressuriezed Water Tank is designed to be used with gas power saws, while making cuts in masonry materials with a wet-use diamond blade. Each tank is made of durable, lightweight poly-carbonate for added durability and a long life. The large 2.6 gallon capacity means less frequent refills and reduced downtime.