Euroboor ECO32-T Mag Drill for Tapping
Need to drill and tap a 1/2″ hole at 42ft high? The ECO.32-T was designed to complete your tailor-made work. At all altitudes. Improved operation and ergonomics will keep you mobile, which is perfect for construction work on site or at the workshop.
- Description
- Specifications
- Video
- Single speed gearbox
- Compact design
- Detachable spindle
- Practical long stroke
- Clear and easy controls
- Left & right rotating
- Electronically adjustable rotating speed
Annular Cutters ø 1/2" - 1 1/4"
Twist Drills ø 1/16" - 1/2"
Countersinking ø 3/8" - 1"
Threading ø 1/8" - 1/2"
Length 12 5/8"
Width 8 1/4"
Height 14 9/16" - 20 3/16"
Stroke 5 15/16"
Weight 26.5 lbs
Magnet (L x W x H) 6 5/16" x 3 1/8" x 1 5/8"
Magnetic Force 3300 lbs
Motor Power 9.1 A
Total Power 9.5 A
Speed (no load) 100-600 rpm
Speed (load 1000 W) 225 rpm
Spindle 3/4" Weldon
Voltage 110 - 120 V / 50-60 Hz
Related Products
-
Euroboor EBM.36/P-18V Mag Drill
Say goodbye to the limitations of cables and cords, and experience the freedom of mobility and versatility with the state-of-the-art Euroboor Battery Machines (EBM). Designed with portability in mind, our EBM series are compact, lightweight and easy to transport. Plus, with no cords to worry about, you can work more efficiently and safely even on hard-to-reach places.
Now meet the ultimate mobile magnetic drilling machine: EBM.36/P-18V . -
HSS 8 PC Imperial – Annular Cutter Set
This set of 6 premium quality industrial grade cutters have superior performance and no compromises. In addition this kit contains 2 pilot pins.
Available in: 1x ø 9/16″ x 30 mm, 9/16″ x 55 mm, 11/16″ x 30 mm, 11/16″ x 55 mm, 13/16″ x 30 mm, 13/16″ x 55 mm -
Read MoreQuick ViewEuroboor Weldon Tap Holders
The Euroboor Weldon Tap holders allow the operator to use a tap bit to thread out the hole that was just cut.
-
Read MoreQuick ViewEuroboor HML 2″ Weldon TCT Carbide Tip Annular Cutter
Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters 2″ with a drill depth of 2″ are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 2″ are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.
-
Euroboor ECO32 Mag Drill
Euroboor ECO.32
Magnetic drilling machine
Ø 12 – 32 mm / 12 kg
The compact Euroboor ECO.32 magnetic core drilling machine has a powerful single speed 1000 W (9.1 A) motor. This portable magnetic core drilling machine is suitable for the use with Weldon twist drills up to 13 mm (1/2″) and countersinks up to 40 mm (1 9/16″). This light and reliable machine is a true addition for every workplace. -
Makita 14″ Chop Saw 15 AMP
The Makita 14” Cut-Off Saw (LW1401) is a metal-cutting solution built for light gauge metal stud and strut, pipe, all thread, conduit, tubing, rebar, and more. The 15 AMP motor delivers 3,800 RPM for the most demanding metal cutting applications. It is engineered to cut up to 5″ round stock, 4-11/16” square tube, and 4” x 7-5/8” or 2-3/4” x 9-1/8” rectangular tubing. It also features fence adjustment up to 45 degrees right or left, and a “tool-less” vice adjustment for increased productivity. The LW1401 weighs only 37 pounds with a locking pin that secures the cutting head in the down position for easy transport and storage. Additional features include a large ergonomic handle and two-stage lock-off power button.
-

Read MoreQuick ViewEuroboor Cutting Oils
Our Euroboor IBO.10 is a general cutting oil with premium cooling and lubrication features, suitable for mild steel. This cutting oil contributes to a high cutting power and tool preservation, and improved processing times.
Euroboor MV.4 is a lubricating and cooling concentrate suitable for all metals. This water-soluble concentrate is particularly suitable for automatic dosing systems. -
Makita 9″ Trigger Handle Grinder
Makita’s 9-Inch Angle Grinder (model GA9060), combines 15 AMP power with comfort and motor-protection features for longer-lasting industrial performance. The GA9060 weighs only 12.1 lbs. and is built with comfort and ergonomic features for extended use. The grinder features an ergonomic rubberized handle with trigger switch, and the gear housing can be positioned every 90 degrees for operator convenience. The side handle can be easily installed on either side of the tool.
The GA9060 is a versatile and powerful grinder engineered for demanding applications including cutting, ferrous metal, paint and rust removal, shipyard maintenance, heavy machinery, metal polishing, general steel grinding, auto repair work, cutting brick and masonry, and restoration work. The grinder is built for welders, fabricators, plumbers, masons, electricians, automotive technicians, stone and tile workers, HVAC, and general contractors seeking a best-in-class industrial quality angle grinder. -
Makita 5″ Trigger Switch Grinder
The Makita 5 in. angle grinder (GA5010Z) has a refined design at only 5.8 lbs. for reduced operator fatigue. An ergonomic soft grip provides increased comfort on the job. It includes a rotatable gear housing that can be positioned every 90°.
The GA5010Z is powered by a 10.5 AMP motor that delivers 11,000 RPM, with electric brake for maximum productivity. It is engineered for a full range of metalworking tasks and is ideal for welders, fabricators, masons, maintenance/repair, and more. -

Read MoreQuick ViewEuroboor HCS 1″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 1″ with a drill depth of 1″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 1″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 1″ from penetrating the second layer of material.









