Euroboor ECO-50S Magnetic Drill Press w/Integrated Oil System
Euroboor ECO.50S
Magnetic drilling machine
Ø 12 – 50 mm / 11,2 kg
The Euroboor ECO.50S magnetic core drilling machine converts maximum power through its two speed oil lubricated gearbox. This improves motor efficiency and lifetime of key components. This portable industrial magnetic core drilling machine has an integrated slide which ensures stable support, faster drilling times and more accurate hole sizing.
- Description
- Technical Data
- Video
The Euroboor ECO.50S is intended for commerical use as a drilling machine for drilling materials with a magnetizable surface using annular cutters and twist drills, and for countersinking in a weather-protected environment using the application tools and accessories recommended by EUROBOOR.
The magnetic drilling machine can be used horizontally, vertically, or overhead.
Metric
Annular cutting Ø 12 - 50 mm
Twist drilling Ø 1 - 23 mm
Countersinking Ø 10 - 55 mm
Length 320 mm
Width 200 mm
Height 445 - 615 mm
Stroke 170 mm
Weight 11,2 kg
Magnet (l x w x h) 160 x 80 x 42 mm
Magnetic force 1700 kg
Motor power 1250 W
Total power 1300 W
Speed (no load) (I) 315 rpm
(II) 690 rpm
Speed (load 1250 W) (I) 235 rpm
(II) 415 rpm
Spindle (Weldon) MT3 19,05 mm
Voltage 110 - 120 V / 60 Hz
220 - 240 V / 50 - 60 Hz
Imperial
Annular cutting Ø 7/16" - 2"
Twist drilling Ø 1/16" - 15/16"
Countersinking Ø 3/8" - 2 3/16"
Length 12 5/8"
Width 7 7/8"
Height 17 1/2" - 24 3/16"
Stroke 6 11/16"
Weight 24.7 lbs
Magnet (l x w x h) 6 5/16" x 3 1/8" x 1 5/8"
Magnetic force 3305 lbs
Motor power 11.4 A
Total power 11.8 A
Speed (no load) (I) 315 rpm
(II) 690 rpm
Speed (load 11.4 A) (I) 235 rpm
(II) 415 rpm
Spindle (Weldon) MT3 3/4"
Voltage 110 - 120 V / 60 Hz
220 - 240 V / 50 - 60 Hz
Related Products
-
Quick ViewMakita 14″ Chop Saw Kit, 18V X2 LXT
The Makita 18V X2 LXT® (36V) Brushless 14″ Cut-Off Saw is a cordless metal-cutting solution ideal for light gauge metals including stud and strut, pipe, all thread, conduit, tubing, rebar, and more. The BL™ Brushless Motor eliminates carbon brushes so it runs cooler and more efficiently for longer life. The Saw is powered by two 18V LXT batteries for maximum cordless performance, and delivers 3,800 RPM for the most demanding metal cutting applications. It will cut up to 5″ round and 4” x 7-5/8” rectangular tubing.
-
Quick ViewMakita 9″ Trigger Handle Grinder
Makita’s 9-Inch Angle Grinder (model GA9060), combines 15 AMP power with comfort and motor-protection features for longer-lasting industrial performance. The GA9060 weighs only 12.1 lbs. and is built with comfort and ergonomic features for extended use. The grinder features an ergonomic rubberized handle with trigger switch, and the gear housing can be positioned every 90 degrees for operator convenience. The side handle can be easily installed on either side of the tool.
The GA9060 is a versatile and powerful grinder engineered for demanding applications including cutting, ferrous metal, paint and rust removal, shipyard maintenance, heavy machinery, metal polishing, general steel grinding, auto repair work, cutting brick and masonry, and restoration work. The grinder is built for welders, fabricators, plumbers, masons, electricians, automotive technicians, stone and tile workers, HVAC, and general contractors seeking a best-in-class industrial quality angle grinder. -
Quick ViewMakita 5″ Trigger Switch Grinder
The Makita 5 in. angle grinder (GA5010Z) has a refined design at only 5.8 lbs. for reduced operator fatigue. An ergonomic soft grip provides increased comfort on the job. It includes a rotatable gear housing that can be positioned every 90°.
The GA5010Z is powered by a 10.5 AMP motor that delivers 11,000 RPM, with electric brake for maximum productivity. It is engineered for a full range of metalworking tasks and is ideal for welders, fabricators, masons, maintenance/repair, and more. -
Quick ViewMakita 7″ Trigger Handle Grinder
The Makita 7 in. Angle Grinder is built around a powerful 15 Amp motor that delivers up to 6,600 RPM for fast stock removal. It features labyrinthine construction that helps seal internal components from outside contaminants to help increase tool life.
The easy-to-use large trigger switch locks on for extended operation, and a large shaft lock permits easy wheel changes. The switch handle rotates 90 degrees left and right, while the side handle may be configured in any of 3 positions to promote user comfort and control. A 7 in. grinding wheel is included. -
Quick ViewHSS 8 PC Imperial – Annular Cutter Set
This set of 6 premium quality industrial grade cutters have superior performance and no compromises. In addition this kit contains 2 pilot pins.
Available in: 1x ø 9/16″ x 30 mm, 9/16″ x 55 mm, 11/16″ x 30 mm, 11/16″ x 55 mm, 13/16″ x 30 mm, 13/16″ x 55 mm -
Quick ViewEuroboor ECO32-T Mag Drill for Tapping
Need to drill and tap a 1/2″ hole at 42ft high? The ECO.32-T was designed to complete your tailor-made work. At all altitudes. Improved operation and ergonomics will keep you mobile, which is perfect for construction work on site or at the workshop.
-
Read MoreQuick ViewEuroboor HCS 1″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 1″ with a drill depth of 1″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 1″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 1″ from penetrating the second layer of material.
-
Quick ViewEuroboor 8 Pc Annular Cutter Set
Our HCS.KIT/9 contains High Speed Steel Annular Cutters which feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. Euroboor HSS annular cutters are equipped with high precision Weldon shanks.
This is a 6 piece HSS cutter set with bits of 9/16″, 11/16″, & 13/16″, each in the 1″ and 2″ lengths. The set also includes two pilot pins. They are IBC.70 & IBC.90. -
Quick ViewEuroboor Cobalt 29 Pc Index Jobber Set
The Euroboor M35 Cobalt High Speed Steel Jobber drill set is ideal for drilling through cast iron and stainless steel. The 135° split point helps to eliminate tip walking, and increases hole accuracy. The unique flute design is superior for removing shavings and material from the hole. All bits above 3/16″ have a 3-flat shank for stability in any drill or chuck.
-
Quick ViewEuroboor IBQ.13 Quick Connect Drill Chuck
The Euroboor IBQ.13 Quick Connect Drill Chuck allows use of drill bits with a standard shaft, sized 1/16″ to 1/2″. The top connection is a 1/2″-20 threaded socket, and can be attached to the Euroboor 1/2UNF-MC3 adapter piece.
