Euroboor Drill Chuck Connection, Morse Taper to Threaded
The Euroboor 1/2UNF-MC3 chuck adapter converts the standard Morse Taper socket on a Euroboor Mag-Drill, to a 1/2″-20 threaded post, ready for any threaded chuck to be attached.
- Description
The Euroboor 1/2UNF-MC3 chuck adapter converts the standard Morse Taper socket on a Euroboor Mag-Drill, to a 1/2"-20 threaded post, ready for any threaded chuck to be attached.
Related Products
-
Aircraft Drill Bits
Aircraft drill bits are long drill bits originally designed for use in the aircraft industry where they often need to drill holes reaching through deep cavities, and then through thin materials. You will find them invaluable for drilling holes in tight spaces, and drilling holes through long or wide pieces of wood.
-
Spade Drill Bits
Spade bits are used for rough boring in wood. Spade bits are flat, with a centering point and two cutters. The cutters are often equipped with spurs in an attempt to ensure a cleaner hole. Intended for high speed use, they are used with electric hand drills. Spade bits are also sometimes referred to as “paddle bits”. Available in 1/4″ – 1-1/2″.
-
Ship Auger Drill Bits
Durable hardened cutting edge for long life in tough materials, including nail-embedded wood. Fully-forged bit for maximum durability. Wide flutes for maximum chip removal and less binding. Aggressive screw-pitch for faster drilling. 5/16″ – 1-1/2″ in 6″ and 18″ length.
-
Read MoreQuick ViewRebar Cutter Adapter Shank
The rebar cutter heads require a shank adapter to mount them on. This shank comes in multiple styles, so you can find the proper one to work with your hammer driver. Whether you use SDS-Max, SDS-+,or Spline, these are ready for the job.
-
Read MoreQuick ViewJobber Drill Bits, Wire Size
Jobber Drill Bits are made from high-speed steel, with a 118° angle tip, and a black oxide finish.
These bits are in American Wire Size. Fractional size bits are listed separately. Click on the Jobbers tag below to see more. -
Read MoreQuick ViewMasonry Bits, Carbide Tip
TruCut Masonry Bits
High quality masonry drill bits with heavy duty carbide tips. These masonry bits will drill through any rock or concrete that needs a hole in it.
The Premium quality bits have a hex-shaped shaft to eliminate spinning in the drill chuck. They also achieve a longer life at higher speeds due to “Super H” grade carbide tips. -
Bit Holder

Made from S2 modified shock resistant steel for professional performance and durability. Patented spiral torsion zone absorbs impact and extends bit life. Made with a high strength industrial magnet for securing your bits.
-
Read MoreQuick ViewJobber Drill Bits, Fractional Sizes, Cobalt
These Cobalt Jobber Drill Bits are made from high-speed steel, with a 118° angle tip, and a cobalt layer finish.
These bits are in Fractional size. American Wire Size bits are listed separately. Click the Jobbers tab below to see more. -
Hot

Quick ViewThunderTwist SDS Drill Bits
The ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions. -

Read MoreQuick ViewEuroboor HCL 2″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 2″ with a drill depth of 2″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 2″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 2″ from penetrating the second layer of material.









