Drill Bits Archives - Thread Source

Quick View

Makita 18-Pc Assorted Drill Bit Set

Get the right bits for your driver-drill or hammer driver-drill. The 18 Pc. Assorted Drill Bit Set (D-59178) offers an assortment of straight shank bits for use in metal, wood, and masonry materials. The metal drilling bits are made of HSS-G for longer life with a 135-degree split-point geometry for fast starts and reduced “walking”. The brad point wood drill bits are engineered for clean, straight holes in wood, and the masonry hammer drill bits can be used in most hammer drills for use in brick, block, and concrete. The straight shank bits are for use with most corded and cordless ⅜” and ½” drills.
Quick View

Euroboor Cobalt 29 Pc Index Jobber Set

The Euroboor M35 Cobalt High Speed Steel Jobber drill set is ideal for drilling through cast iron and stainless steel. The 135° split point helps to eliminate tip walking, and increases hole accuracy. The unique flute design is superior for removing shavings and material from the hole. All bits above 3/16″ have a 3-flat shank for stability in any drill or chuck.
Quick View

URREA Metal Bit Box, 1/16″ Increments

Bit boxes allow you to conveniently transport your bits without damaging or losing them. This bit box is used for storing 29 bits inthe following sizes: 1/16″ to 1/2″, in 1/64″ increments.
Quick View

Makita Impact Gold 14 Pc Titanium Drill Bit Set

The Impact GOLD® 14 Pc. Titanium Drill Bit Set (B-65399) offers an assortment of ¼” hex shank bits for drilling clean and accurate holes in metal, wood and plastic.
With the Titanium Nitride (TiN) coating, these bits are engineered to last 2.5X longer than non-coated bits. The 135-degree split-point geometry is built for fast starts and reduced “walking”. The bits are impact-rated and for use in ¼” hex impact drivers .
They are ideal for drilling holes in ferrous metal, wood, plastic, non-ferrous metal, cast iron and stainless steel.
Read More
Quick View

Makita SDS MAX Concrete Drill Bits, 2 or 6 Cutters

Makita has a deep line-up of SDS-MAX concrete drilling solutions, including premium carbide bits with tips designed for efficient drilling and longer service life. They are available in sizes from 1/2″ to 1-1/2″ diameter, and 13″ or 21″ length.

Makita 2-Cutter Bits feature premium carbide tips, with a special flute design that is engineered for faster dust removal than standard bits. These bits are ideal for a range of general purpose concrete drilling applications. This is available in the 1/2″ x 13″ and 1/2″ x 21″ bits.

For holes above 1/2″, Makita makes 6-Cutter Bits that feature premium carbide tips, and are engineered for faster drilling in concrete and reinforced concrete. The bits deliver rounder holes for more efficient anchor setting. Makita SDS-MAX 6-Cutter Bits are ideal for a range of drilling applications in concrete and reinforced concrete.
Read More
Quick View

Makita HSS Drill Bit Black Oxide 1/4″ Drive

Broken drill bits are a waste of time. Makita Black Oxide Drill Bits are designed for use with today’s high-torque drills and impact drivers, and engineered for added durability for longer service life. The durable one-piece design is constructed with High Speed Steel (HSS), with a ¼” hex shank for use with impact drivers and driver-drills. Makita Black Oxide Drill Bits are ideal for drilling holes in ferrous metal, wood, plastic, non-ferrous metal, and cast iron.
Quick View

Makita Keyless Chuck for 1/4″ Impact Driver

The Makita 3/8 in. Metal Impact Driver Keyless Chuck is a drill attachment that is made from metal. This chuck can convert an impact driver into a driver drill. It accepts round and hex shank bits.
Quick View

Mag-Bit 2 Oz. Cutting Fluid, Concentrated

For use with many Mag-Bit cutting bits and blades.
Highly concentrated. Recommended Dilution of 20:1 for all tasks.
2 oz bottle makes 1.56 gallons of cutting fluid.
Excellent rust control on all metals; No in-process rust or rework.
Low foaming, low misting, water soluble.
Non-nitrited, non-halogenated, non-silicones or silicate, non-phenolic.
Rated insignificant under NFPA hazard rating for both fire and health.
Read More
Quick View

Tungsten Carbide Tipped Hole Cutters

If you need to cut through the toughest materials, these tungsten carbide tipped hole cutters are the perfect solution. Whether it is stainless steel, cast iron, high density resin, or metal plate and sheet metal, these cutters get the job done.
They cut up to 3/16″ deep (4″ bit cuts up to 1″ deep), and have a spring included around the pilot bit to eject the slug. Sizes from 11/16″ to 2″ have a 7/16″ shank, and above that have a 1/2″ shank.
Each hole cutter comes with a pilot bit, and replacement bits are available.
The 4-piece kit contains the 7/8″, 1-1/8″, and 1-3/8″ cutters, plus the pilot bit.
Quick View

Extension Bit, 12″

The TruCut 12″ extension bit allows you to make cuts in deep recesses and corners.
Read More
Quick View

Pilot Drill Bits for Hole Saw Arbors

As you use your hole saw blades, the pilot bit in the arbor will eventually wear out. Rather than buying a full replacement arbor, you can just buy a new pilot bit and replace the old bit.
These pilot bits are made from High Speed Steel (HSS), and fit all hole saw arbors. They are available in lengths of 3″ and 4″. There is even a carbide tipped 4″ bit available if you need extra cutting power.
Read More
Quick View

Arbors for Hole Saws, Mag-Bit

These arbors attach to various sizes of hole saws, and have shanks for hex and SDS drivers. They are made by Mag-Bit, but match industry standard hole saws. Each arbor can attach to multiple sizes of hole saw, with the smallest starting at 9/16″ and going up to 1-3/16″.
The larger size starts at 1-1/4″, and runs up to the largest at 6″. This size has two posts that fit into matching holes in the back plate of the saw body, so ensure that the saw can’t spin around the arbor as you cut the hole.
In addition to that choice, an arbor may have a shank that is 1/4″, 3/8″, or 7/16″ hex, or SDS.