Mag-Bit 2 Oz. Cutting Fluid, Concentrated
For use with many Mag-Bit cutting bits and blades.
Highly concentrated. Recommended Dilution of 20:1 for all tasks.
2 oz bottle makes 1.56 gallons of cutting fluid.
Excellent rust control on all metals; No in-process rust or rework.
Low foaming, low misting, water soluble.
Non-nitrited, non-halogenated, non-silicones or silicate, non-phenolic.
Rated insignificant under NFPA hazard rating for both fire and health.
- Applications
Sawing, Drilling, Cutting, Tapping, Milling, Grinding, Reaming, Turning.
Materials: All metals except magnesium, Fiberglass, Composites, Ceramics, Quartz, Glass, and Ferrite.
Related Products
-
Read MoreQuick ViewPaddle Bits, Individual
Paddle bits, also called spade bits, have a wide, flat blade. They are commonly used by tradesmen such as electricians and plumbers for drilling holes through studs in walls for running wiring or pipes (auger bits and hole saws are also used for this), but they also have a place in the woodshop for drilling on fine woodworking projects.
An extension kit is available for the extreme jobs. It includes a 12″ extension shaft, and a bent-hex tool to securely tighten the retaining screws when the paddle bit is installed. (See image.) -
Read MoreQuick ViewJobber Drill Bits, Fractional Sizes, Cobalt
These Cobalt Jobber Drill Bits are made from high-speed steel, with a 118° angle tip, and a cobalt layer finish.
These bits are in Fractional size. American Wire Size bits are listed separately. Click the Jobbers tab below to see more. -
Quick View
HSS 8 PC Imperial – Annular Cutter Set
This set of 6 premium quality industrial grade cutters have superior performance and no compromises. In addition this kit contains 2 pilot pins.
Available in: 1x ø 9/16″ x 30 mm, 9/16″ x 55 mm, 11/16″ x 30 mm, 11/16″ x 55 mm, 13/16″ x 30 mm, 13/16″ x 55 mm -
Quick View
Heavy Duty Cobalt Drill Bits
Our Cobalt High Speed drill bits are made of high speed Cobalt Steel. The Cobalt content adds high abrasion resistance to the already hard working properties if our bits. Heavy web construction and 135 degree Split-Point add to the long life of these bits. Available in sizes 1/32″ – 1/2″.
-
Read MoreQuick View
Granite & Marble Carbide Bits
Specially formed for cutting smoothly through granite, marble, and other hard rocks.
-
Quick View
Bit Holder
Made from S2 modified shock resistant steel for professional performance and durability. Patented spiral torsion zone absorbs impact and extends bit life. Made with a high strength industrial magnet for securing your bits. -
Quick View
Impactech Magnetic Nutsetter Hex Bit
Made from S2 modified shock resistant steel for professional performance and durability. Featuring a patented spiral torsion zone absorbs impact and extends bit life. Proprietary precision CNC machined tips for excellent fit in fastener recess. Tested to outperform all leading brands in lifecycle and tip failure testing. Made with a high strength industrial magnet for securing your bits. -
Quick View
“Silver & Deming” Drill Bits
One particular type of reduced-shank drill bits are Silver & Deming (S&D) bits, whose sets run from 33/64″ to 1″ drill body diameter with a standard 1/2″ reduced shank for all. This allows drill presses with 1/2″ chucks to run the larger drills. S&D bits are 6″ in length with a 3″ drilling depth.
-
Read MoreQuick View
Masonry Bits, Carbide Tip
TruCut Masonry Bits
High quality masonry drill bits with heavy duty carbide tips. These masonry bits will drill through any rock or concrete that needs a hole in it.
The Premium quality bits have a hex-shaped shaft to eliminate spinning in the drill chuck. They also achieve a longer life at higher speeds due to “Super H” grade carbide tips. -
Read MoreQuick View
Euroboor HCL 2″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 2″ with a drill depth of 2″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 2″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 2″ from penetrating the second layer of material.
Made from S2 modified shock resistant steel for professional performance and durability. Patented spiral torsion zone absorbs impact and extends bit life. Made with a high strength industrial magnet for securing your bits.
