HSS Black Oxide Drill Bits
The HSS Black Oxide bits are made in the USA with a 118 degree point and are available from 1/32″ to 11/16″.e”]
- Description
- Selection Chart
Description
- High Speed Steel
- Ground Flute
- Black Oxide
- 118 Point
- Made in the USA
- NAS 907 Type A
- Removable shock-absorbing end caps

Related Products
-
Spade Drill Bits
Spade bits are used for rough boring in wood. Spade bits are flat, with a centering point and two cutters. The cutters are often equipped with spurs in an attempt to ensure a cleaner hole. Intended for high speed use, they are used with electric hand drills. Spade bits are also sometimes referred to as “paddle bits”. Available in 1/4″ – 1-1/2″.
-
Read MoreQuick ViewDouble End Drill Bits
With these double end drill bits, you can work twice as long without needing to carry a second bit. No worrying about losing it before it’s needed. As the first end gets worn out, simply remove the bit from the drill, turn it around, and insert the worn end in the chuck. Then get right back to work.
-
Heavy Duty Cobalt Drill Bits
Our Cobalt High Speed drill bits are made of high speed Cobalt Steel. The Cobalt content adds high abrasion resistance to the already hard working properties if our bits. Heavy web construction and 135 degree Split-Point add to the long life of these bits. Available in sizes 1/32″ – 1/2″.
-
Read MoreQuick ViewJobber Drill Bits, Fractional Sizes, Cobalt
These Cobalt Jobber Drill Bits are made from high-speed steel, with a 118° angle tip, and a cobalt layer finish.
These bits are in Fractional size. American Wire Size bits are listed separately. Click the Jobbers tab below to see more. -
Read MoreQuick ViewJobber Drill Bits, Wire Size
Jobber Drill Bits are made from high-speed steel, with a 118° angle tip, and a black oxide finish.
These bits are in American Wire Size. Fractional size bits are listed separately. Click on the Jobbers tag below to see more. -
Read MoreQuick ViewJobber Drill Bits, Fractional Sizes
Jobber Drill Bits are made from high-speed steel, with a 118° angle tip, and a black oxide finish.
These bits are in Fractional size. American Wire Size bits are listed separately. Click the Jobbers tab below to see more. -
Read MoreQuick ViewEuroboor IBC Pilot Pins
Genuine Euroboor pilot pins imported directly from the manufacturer in The Netherlands. These pilot pins are manufactured for use with short short or long Euroboor hole cutters from 1/2″ to 1″ in diameter.
-
Read MoreQuick ViewAircraft Drill Bits
These Aircraft length drill bits are formed from high-speed steel, with a 135° split point tip, and black oxide finish.
Select sizes are available in lengths up to 72″, for the extreme jobs. -

Read MoreQuick ViewEuroboor HCS 1″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 1″ with a drill depth of 1″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 1″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 1″ from penetrating the second layer of material.
-

Read MoreQuick ViewEuroboor HCL 2″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 2″ with a drill depth of 2″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 2″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 2″ from penetrating the second layer of material.







