Tungsten Carbide Tipped Hole Cutters
If you need to cut through the toughest materials, these tungsten carbide tipped hole cutters are the perfect solution. Whether it is stainless steel, cast iron, high density resin, or metal plate and sheet metal, these cutters get the job done.
They cut up to 3/16″ deep (4″ bit cuts up to 1″ deep), and have a spring included around the pilot bit to eject the slug. Sizes from 11/16″ to 2″ have a 7/16″ shank, and above that have a 1/2″ shank.
Each hole cutter comes with a pilot bit, and replacement bits are available.
The 4-piece kit contains the 7/8″, 1-1/8″, and 1-3/8″ cutters, plus the pilot bit.
- Additional information
- Description
Additional information
| Size | 3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-3/8″, 1-3/4″, 2″, 2-1/2″, 3″, 4″ X 1″ DEEP, 4PC KIT (7/8″, 1-1/8″, 1-3/8″), Pilot Bit |
|---|
If you need to cut through the toughest materials, these tungsten carbide hole cutters are the perfect solution. Whether it is stainless steel, cast iron, high density resin, or metal plate and sheet metal, these cutters get the job done.
They cut up to 3/16" deep, and have a spring included around the 1/4" pilot bit to If you need to cut through the toughest materials, these tungsten carbide tipped hole cutters are the perfect solution. Whether it is stainless steel, cast iron, high density resin, or metal plate and sheet metal, these cutters get the job done.
They cut up to 3/16″ deep (4" bit cuts up to 1" deep), and have a spring included around the pilot bit to eject the slug. Sizes from 11/16″ to 2″ have a 7/16″ shank, and above that have a 1/2″ shank.
Each hole cutter comes with a pilot bit, and replacement bits are available.
The 4-piece kit contains the 7/8", 1-1/8", and 1-3/8" cutters, plus the pilot bit.eject the slug. Sizes from 11/16" to 2-1/4" have a 7/16" shank, and 2-3/8" up to 3" have a 1/2" shank.
Each tungsten carbide tipped hole cutter comes with a pilot bit, and replacement bits are available.
Related Products
-
Quick View“Silver & Deming” Drill Bits
One particular type of reduced-shank drill bits are Silver & Deming (S&D) bits, whose sets run from 33/64″ to 1″ drill body diameter with a standard 1/2″ reduced shank for all. This allows drill presses with 1/2″ chucks to run the larger drills. S&D bits are 6″ in length with a 3″ drilling depth.
-
Read MoreQuick View
Glass & Tile Bits
These bits are made specifically to cut cleanly through glass and ceramic tile.
-
Read MoreQuick View
Euroboor HCS 1″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 1″ with a drill depth of 1″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 1″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 1″ from penetrating the second layer of material.
-
Read MoreQuick View
Jobber Drill Bits, Fractional Sizes
Jobber Drill Bits are made from high-speed steel, with a 118° angle tip, and a black oxide finish.
These bits are in Fractional size. American Wire Size bits are listed separately. Click the Jobbers tab below to see more. -
Read MoreQuick View
Rebar Cutter Adapter Shank
The rebar cutter heads require a shank adapter to mount them on. This shank comes in multiple styles, so you can find the proper one to work with your hammer driver. Whether you use SDS-Max, SDS-+,or Spline, these are ready for the job.
-
Read MoreQuick View
Paddle Bits, Individual
Paddle bits, also called spade bits, have a wide, flat blade. They are commonly used by tradesmen such as electricians and plumbers for drilling holes through studs in walls for running wiring or pipes (auger bits and hole saws are also used for this), but they also have a place in the woodshop for drilling on fine woodworking projects.
An extension kit is available for the extreme jobs. It includes a 12″ extension shaft, and a bent-hex tool to securely tighten the retaining screws when the paddle bit is installed. (See image.) -
Read MoreQuick View
Jobber Drill Bit Sets
Jobber drill bits are well-named, because they do the job as expected.
The basic set contains bits made from High-Speed Steel (HSS) with a black oxide finish. The distinctive Black&Gold set has a special finish to help prevent rust.
The Mechanics Stubby set features a reduced length, which means it is less prone to breakage, even under hard use. The Cobalt drill bits are specially made to drill through hard metals, including stainless steel. -
HotQuick View
ThunderTwist SDS Drill Bits
The ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions. -
Quick View
Bit Holder
Made from S2 modified shock resistant steel for professional performance and durability. Patented spiral torsion zone absorbs impact and extends bit life. Made with a high strength industrial magnet for securing your bits. -
Quick View
HSS Black Oxide Drill Bits
The HSS Black Oxide bits are made in the USA with a 118 degree point and are available from 1/32″ to 11/16″.e”]
The ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions.
Made from S2 modified shock resistant steel for professional performance and durability. Patented spiral torsion zone absorbs impact and extends bit life. Made with a high strength industrial magnet for securing your bits.
