Glass & Tile Bits
These bits are made specifically to cut cleanly through glass and ceramic tile.
- Additional information
- Description
Additional information
| Size | 1/8″ X 2-1/8″, 3/16″ X 2-1/2″, 1/4″ X 2-1/2″, 5/16″ X 2-3/4″, 3/8″ X 2-3/4″, 1/2″ X 3″, 1/4″ X 2-3/4″ QUAD |
|---|
These bits are made specifically to cut cleanly through glass and ceramic tile.
Related Products
-
Read MoreQuick ViewJobber Drill Bits, Wire Size
Jobber Drill Bits are made from high-speed steel, with a 118° angle tip, and a black oxide finish.
These bits are in American Wire Size. Fractional size bits are listed separately. Click on the Jobbers tag below to see more. -
Hot
Quick ViewThunderTwist SDS Drill Bits
The ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions. -
Read MoreQuick View
Double End Drill Bits
With these double end drill bits, you can work twice as long without needing to carry a second bit. No worrying about losing it before it’s needed. As the first end gets worn out, simply remove the bit from the drill, turn it around, and insert the worn end in the chuck. Then get right back to work.
-
Quick View
Aircraft Drill Bits
Aircraft drill bits are long drill bits originally designed for use in the aircraft industry where they often need to drill holes reaching through deep cavities, and then through thin materials. You will find them invaluable for drilling holes in tight spaces, and drilling holes through long or wide pieces of wood.
-
Read MoreQuick View
Countersink Drill Bits
Countersinking screws is a often used method for ensuring a flush surface, without bumps of screwheads getting in the way. These cross-hole countersinks are specially designed so that the trailing edge of the hole makes the cut, and they excel at ejecting chips as they drill. Made of strong steel, they ensure years of precision work.
-
Quick View
Bit Holder
Made from S2 modified shock resistant steel for professional performance and durability. Patented spiral torsion zone absorbs impact and extends bit life. Made with a high strength industrial magnet for securing your bits. -
Quick View
“Silver & Deming” Drill Bits
One particular type of reduced-shank drill bits are Silver & Deming (S&D) bits, whose sets run from 33/64″ to 1″ drill body diameter with a standard 1/2″ reduced shank for all. This allows drill presses with 1/2″ chucks to run the larger drills. S&D bits are 6″ in length with a 3″ drilling depth.
-
Quick View
Spade Drill Bits
Spade bits are used for rough boring in wood. Spade bits are flat, with a centering point and two cutters. The cutters are often equipped with spurs in an attempt to ensure a cleaner hole. Intended for high speed use, they are used with electric hand drills. Spade bits are also sometimes referred to as “paddle bits”. Available in 1/4″ – 1-1/2″.
-
Read MoreQuick View
Euroboor HCL 2″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 2″ with a drill depth of 2″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 2″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 2″ from penetrating the second layer of material.
-
Read MoreQuick View
Euroboor HCS 1″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 1″ with a drill depth of 1″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 1″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 1″ from penetrating the second layer of material.
The ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions.
Made from S2 modified shock resistant steel for professional performance and durability. Patented spiral torsion zone absorbs impact and extends bit life. Made with a high strength industrial magnet for securing your bits.
