Silver & Deming, 1/2″ Shank
Made especially for drill presses and milling machines, these Silver & Deming drill bits are 6″ long with a 3″ drilling depth. They all have a 1/2″ shaft.
- Additional information
- Description
Additional information
| Size | 9/16″, 5/8″, 11/16″, 3/4″, 13/16″, 7/8″, 15/16″, 1″, 1-1/4″, 3/4″ Cobalt |
|---|
Made especially for drill presses and milling machines, these Silver & Deming drill bits are 6" long with a 3" drilling depth. They all have a 1/2" shaft.
Related Products
-
Quick View“Silver & Deming” Drill Bits
One particular type of reduced-shank drill bits are Silver & Deming (S&D) bits, whose sets run from 33/64″ to 1″ drill body diameter with a standard 1/2″ reduced shank for all. This allows drill presses with 1/2″ chucks to run the larger drills. S&D bits are 6″ in length with a 3″ drilling depth.
-
Read MoreQuick View
Masonry Bits, Carbide Tip
TruCut Masonry Bits
High quality masonry drill bits with heavy duty carbide tips. These masonry bits will drill through any rock or concrete that needs a hole in it.
The Premium quality bits have a hex-shaped shaft to eliminate spinning in the drill chuck. They also achieve a longer life at higher speeds due to “Super H” grade carbide tips. -
Read MoreQuick View
Jobber Drill Bits, Fractional Sizes
Jobber Drill Bits are made from high-speed steel, with a 118° angle tip, and a black oxide finish.
These bits are in Fractional size. American Wire Size bits are listed separately. Click the Jobbers tab below to see more. -
Read MoreQuick View
Double End Drill Bits
With these double end drill bits, you can work twice as long without needing to carry a second bit. No worrying about losing it before it’s needed. As the first end gets worn out, simply remove the bit from the drill, turn it around, and insert the worn end in the chuck. Then get right back to work.
-
Read MoreQuick View
Paddle Bits, Individual
Paddle bits, also called spade bits, have a wide, flat blade. They are commonly used by tradesmen such as electricians and plumbers for drilling holes through studs in walls for running wiring or pipes (auger bits and hole saws are also used for this), but they also have a place in the woodshop for drilling on fine woodworking projects.
An extension kit is available for the extreme jobs. It includes a 12″ extension shaft, and a bent-hex tool to securely tighten the retaining screws when the paddle bit is installed. (See image.) -
Read MoreQuick View
Euroboor HCS 1″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 1″ with a drill depth of 1″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 1″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 1″ from penetrating the second layer of material.
-
Read MoreQuick View
Aircraft Drill Bits
These Aircraft length drill bits are formed from high-speed steel, with a 135° split point tip, and black oxide finish.
Select sizes are available in lengths up to 72″, for the extreme jobs. -
Read MoreQuick View
Jobber Drill Bit Sets
Jobber drill bits are well-named, because they do the job as expected.
The basic set contains bits made from High-Speed Steel (HSS) with a black oxide finish. The distinctive Black&Gold set has a special finish to help prevent rust.
The Mechanics Stubby set features a reduced length, which means it is less prone to breakage, even under hard use. The Cobalt drill bits are specially made to drill through hard metals, including stainless steel. -
Read MoreQuick View
Euroboor HCL 2″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 2″ with a drill depth of 2″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 2″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 2″ from penetrating the second layer of material.
-
Quick View
Duo-Bit Standard Masonry Drill Bits
The Duo-Bit Masonry Bits feature a high speed steel shank and carbide tips for durability. From drilling concrete to powering through brickwork, these masonry drill bits are excellent for a variety of heavy duty applications! 1/8″ – 1″ in 3″ and 6″ length
