Cutting Archives - Page 8 of 5

Read More
Quick View

Makita Demolition Sawzall Blades

Makita Demolisher™ reciprocating saw blades are engineered for the most demanding of demolition applications. The fully reinforced teeth and cobalt content minimize teeth breakage and increases durability. Added blade thickness increases its resistance to bending.
Quick View

Mag-Bit 2 Oz. Cutting Fluid, Concentrated

For use with many Mag-Bit cutting bits and blades.
Highly concentrated. Recommended Dilution of 20:1 for all tasks.
2 oz bottle makes 1.56 gallons of cutting fluid.
Excellent rust control on all metals; No in-process rust or rework.
Low foaming, low misting, water soluble.
Non-nitrited, non-halogenated, non-silicones or silicate, non-phenolic.
Rated insignificant under NFPA hazard rating for both fire and health.
Read More
Quick View

Mag-Bit Hack Saw Blades

MAG-BIT hack saw blades are ready to cut through pipe, tubing, and solids. Cuts wood, plastic, or any machinable metal including conduit, stainless steel tubing, copper tubing, structural materials, and angle iron.
With blade options of 14, 18, 24, or 32 Teeth Per Inch (TPI), these blades will let you finish your job quickly.
Read More
Quick View

Tungsten Carbide Tipped Hole Cutters

If you need to cut through the toughest materials, these tungsten carbide tipped hole cutters are the perfect solution. Whether it is stainless steel, cast iron, high density resin, or metal plate and sheet metal, these cutters get the job done.
They cut up to 3/16″ deep (4″ bit cuts up to 1″ deep), and have a spring included around the pilot bit to eject the slug. Sizes from 11/16″ to 2″ have a 7/16″ shank, and above that have a 1/2″ shank.
Each hole cutter comes with a pilot bit, and replacement bits are available.
The 4-piece kit contains the 7/8″, 1-1/8″, and 1-3/8″ cutters, plus the pilot bit.
Read More
Quick View

Makita Bandsaw Blades, 44-7/8″

Makita’s Portable Band Saw Blade features bi-metal construction that lasts longer than carbon blades for added user convenience and value. They make clean, quick cuts in a wide variety of applications including cutting all thread, rebar, pipe and channel. For use cutting a wide variety of materials including mild steel, aluminum and stainless steel.
Read More
Quick View

Hole Saw Kits

These hole saw kits contain the most common sizes needed on the jobsite, held in a durable, custom fit, plastic case. They each contain pilot bits, a small arbor with 1/4″ shank, and a large arbor with 7/16″ shank.
The Electrician’s Kit includes:
7/8″, 1-1/8″, 1-3/8″, 1-3/4″, 2″, 2-1/2″ hole saws, and small & large arbors with pilot bits.
The Plumber’s Kit includes:
3/4″, 7/8″, 1-1/8″, 1-1/2″, 1-3/4″, 2-1/4″ hole saws, and small and large arbors with pilot bits.
(Case color and design may vary.)
Read More
Quick View

Pilot Drill Bits for Hole Saw Arbors

As you use your hole saw blades, the pilot bit in the arbor will eventually wear out. Rather than buying a full replacement arbor, you can just buy a new pilot bit and replace the old bit.
These pilot bits are made from High Speed Steel (HSS), and fit all hole saw arbors. They are available in lengths of 3″ and 4″. There is even a carbide tipped 4″ bit available if you need extra cutting power.
Read More
Quick View

Bi-Metal Hole Saws

Bi-Metal hole saws are constructed using both High Speed Steel (HSS) for its strength, and spring steel for its flexibility. This allows fast cutting in a wide range of materials, with less breakage from tough jobs.
These hole saws also have a 4/6 variable pitch tooth combination to reduce vibration, and a deep cup for improved chip removal.
Quick View

Exact TCT Tungsten Carbide Blade

The Exact pipe cutting system improves pipe cutting beyond comparison. Not only do Exact pipe cutters complete the work in a fraction of the time taken by alternative methods, but the quality of the finished cut is so clean and straight that normally no extra shaping or reworking is required. The pipe cutters are light and easily carried, enabling the work to be performed wherever it is needed.
TCT 165: Blade with tungsten carbide tips for general use. Suitable for cutting steel, copper, aluminum and plastics. TCT blades can be sharpened a couple of times so they will become like new.

6-1/2″ TCT CARBIDE BLADE FOR 360E STEEL-COPPER-PLASTICS
Quick View

Exact Cermet Carbide Blade, 6-1/2″

The Exact pipe cutting system improves pipe cutting beyond comparison. Not only do Exact pipe cutters complete the work in a fraction of the time taken by alternative methods, but the quality of the finished cut is so clean and straight that normally no extra shaping or reworking is required. The pipe cutters are light and easily carried, enabling the work to be performed wherever it is needed.
Cermet 165: Blade with ceramic tips alloy for heavy duty applications, especially for cutting stainless and acid proof steel. Cermet blades can be sharpened a couple of times so they will become like new.

6-1/2 CERMET CARBIDE BLADE FOR 360E STEEL-STAINLESS-COPPER-PLASTIC 900
Quick View

Exact Cermet Carbide Blade, 5-1/2″

The Exact pipe cutting system improves pipe cutting beyond comparison. Not only do Exact pipe cutters complete the work in a fraction of the time taken by alternative methods, but the quality of the finished cut is so clean and straight that normally no extra shaping or reworking is required. The pipe cutters are light and easily carried, enabling the work to be performed wherever it is needed.
Cermet 140: Blade with ceramic alloy tips for heavy duty applications, especially for cutting stainless and acid proof steel. Cermet blades can be sharpened a couple of times so they will become like new.

5-1/2″CERMET CARBIDE BLADE FOR STEEL-STAINLESS-COPPER-PLASTICS900
Quick View

Cut Off Wheel, Stationary, Double Reinforced

This cut off wheel is made with heavy duty fiberglass reinforcement, for high-speed machines, and demanding cutting tasks. It meets or exceeds all safety standards for all machines on the market.