Exact TCT Tungsten Carbide Blade
The Exact pipe cutting system improves pipe cutting beyond comparison. Not only do Exact pipe cutters complete the work in a fraction of the time taken by alternative methods, but the quality of the finished cut is so clean and straight that normally no extra shaping or reworking is required. The pipe cutters are light and easily carried, enabling the work to be performed wherever it is needed.
TCT 165: Blade with tungsten carbide tips for general use. Suitable for cutting steel, copper, aluminum and plastics. TCT blades can be sharpened a couple of times so they will become like new.
6-1/2″ TCT CARBIDE BLADE FOR 360E STEEL-COPPER-PLASTICS
- Description
TCT 165: Blade with tungsten carbide tips for general use. Suitable for cutting steel, copper, aluminum and plastics. TCT blades can be sharpened a couple of times so they will become like new.
Related Products
-
Read MoreQuick View
Oshlun Multi-Tool Blades
-
Read MoreQuick View
Bi-Metal Hole Saws
Bi-Metal hole saws are constructed using both High Speed Steel (HSS) for its strength, and spring steel for its flexibility. This allows fast cutting in a wide range of materials, with less breakage from tough jobs.
These hole saws also have a 4/6 variable pitch tooth combination to reduce vibration, and a deep cup for improved chip removal. -
Exact Cermet Carbide Blade, 5-1/2″
The Exact pipe cutting system improves pipe cutting beyond comparison. Not only do Exact pipe cutters complete the work in a fraction of the time taken by alternative methods, but the quality of the finished cut is so clean and straight that normally no extra shaping or reworking is required. The pipe cutters are light and easily carried, enabling the work to be performed wherever it is needed.
Cermet 140: Blade with ceramic alloy tips for heavy duty applications, especially for cutting stainless and acid proof steel. Cermet blades can be sharpened a couple of times so they will become like new.5-1/2″CERMET CARBIDE BLADE FOR STEEL-STAINLESS-COPPER-PLASTICS900
-
Read MoreQuick View
Makita Demolition Sawzall Blades
Makita Demolisher™ reciprocating saw blades are engineered for the most demanding of demolition applications. The fully reinforced teeth and cobalt content minimize teeth breakage and increases durability. Added blade thickness increases its resistance to bending.
-
Makita 7-1/4″ 24 T Carbide Saw Blades, 10 Pack
The 7-1/4 in. 24T Carbide-Tipped Max Efficiency Ultra-Thin Kerf Framing Saw Blade is ideal for a framers using cordless circular saws for a full range of wood cutting applications. The ultra-thin kerf design (only 0.057 in.) and specially engineered blade teeth to assist in reducing the load put on the tool while cutting, with a reduced swing width that allows for smoother material removal with less cutting resistance. The result is increased cutting efficiency, and users get up to 70% faster cutting and up to 70% more cuts per charge compared to standard blades.
The high grade Tungsten Carbide tips are engineered for improved durability and longer blade life, and the special ATAFR (Alternate Top Alternate Face with Raker) carbide tips provide smoother and caster cuts. Added features including a blade coating for reduced pitch build-up. -
Read MoreQuick View
Mag-Bit Hack Saw Blades
MAG-BIT hack saw blades are ready to cut through pipe, tubing, and solids. Cuts wood, plastic, or any machinable metal including conduit, stainless steel tubing, copper tubing, structural materials, and angle iron.
With blade options of 14, 18, 24, or 32 Teeth Per Inch (TPI), these blades will let you finish your job quickly. -
Read MoreQuick View
Arbors for Hole Saws, Mag-Bit
These arbors attach to various sizes of hole saws, and have shanks for hex and SDS drivers. They are made by Mag-Bit, but match industry standard hole saws. Each arbor can attach to multiple sizes of hole saw, with the smallest starting at 9/16″ and going up to 1-3/16″.
The larger size starts at 1-1/4″, and runs up to the largest at 6″. This size has two posts that fit into matching holes in the back plate of the saw body, so ensure that the saw can’t spin around the arbor as you cut the hole.
In addition to that choice, an arbor may have a shank that is 1/4″, 3/8″, or 7/16″ hex, or SDS. -
Makita 5-7/8″ 52T Saw Blade, for Aluminum
The Makita 5-7/8″ 52T Carbide-Tipped Metal Cutting Saw Blade is the ideal accessory for the Makita XSC02 or XSC04 18V LXT® Lithium-Ion 5-7/8″ Cordless Metal Cutting Saws. The Makita Metal Cutting Saw Blade has an ultra-thin kerf design that provides smoother cuts with less drag on the motor and minimal material loss. It is ideal for cutting Aluminum.
-
Makita XGT 40V Circular Saw
The 40V max XGT® Brushless 7-1/4” Circular Saw (GSH01Z) provides cordless convenience, while taking on high-demand applications. The Makita-built brushless motor delivers 6,000 RPM for high-speed cutting performance. It cuts 3X the material in a single pass with a large cutting capacity of 2-5/8” at 90-degrees. This saw is ideal for framers, builders, roofers, forming, and more.
-
Makita 5″ Wet/Dry Masonry Saw, 18V LXT
The 18V LXT® Brushless 5” Dry/Wet Masonry Saw (XCC01Z) is a powerful cordless wet saw for demanding applications, such as cutting tile, masonry, concrete, and more. The motor delivers 8,800 RPM. With the included 5″ Diamond Blade, it has a high depth of cut capacity of up to 1-9/16” at 90-degrees. The XCC01Z attaches to an optional guide rail with a guide rail adapter (both sold separately), in order to provide straight, accurate cutting.
The saw includes an integrated water delivery system with water flow adjustment, which continuously feeds water for OSHA Table 1 Compliance in masonry cutting applications. For dry cutting, the saw is equipped with Auto-start Wireless System (AWS®), which utilizes Bluetooth® technology for wireless power-on/off communication between the tool and an AWS-equipped dust extractor.