Cut Off Wheel, Stationary, Double Reinforced
This cut off wheel is made with heavy duty fiberglass reinforcement, for high-speed machines, and demanding cutting tasks. It meets or exceeds all safety standards for all machines on the market.
- Description
- Abrasive Materials and Applications
- Data Sheets & Downloads
This cut off wheel is made with heavy duty fiberglass reinforcement, for high-speed machines, and demanding cutting tasks. It meets or exceeds all safety standards for all machines on the market.
Aluminum Oxide:
General purpose grain for clean cuts and long life.
For ferrous metals, stainless steel, non-ferrous metals, and general purpose
Safety Data Sheet (SDS), Vitrified Bond Abrasives
Safety Data Sheet (SDS), Resin Bonded Abrasives
Safety Data Sheet (SDS), Flap Disc Abrasives
Related Products
-
Quick ViewExact TCT Tungsten Carbide Blade
The Exact pipe cutting system improves pipe cutting beyond comparison. Not only do Exact pipe cutters complete the work in a fraction of the time taken by alternative methods, but the quality of the finished cut is so clean and straight that normally no extra shaping or reworking is required. The pipe cutters are light and easily carried, enabling the work to be performed wherever it is needed.
TCT 165: Blade with tungsten carbide tips for general use. Suitable for cutting steel, copper, aluminum and plastics. TCT blades can be sharpened a couple of times so they will become like new.6-1/2″ TCT CARBIDE BLADE FOR 360E STEEL-COPPER-PLASTICS
-
Quick ViewMakita 5-7/8″ Metal Cutting Saw, 18V LXT
Makita is the leader in brushless motor technology, and the 18V LXT® Lithium-Ion Brushless Cordless 5-7/8” Metal Cutting Saw delivers faster metal cutting through Unistrut®, all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more. With a full 2-1/4″ cutting capacity, it is ideal for electrical contractors since it will cut 2” conduit in one pass – a huge time saver. It is also ideal for HVAC, installation, metal building, metal fabrication, plumbing, metal roofing, and for any pro-contractor who requires a best-in-class cordless metal cutting saw.
-
Quick ViewMag-Bit 2 Oz. Cutting Fluid, Concentrated
For use with many Mag-Bit cutting bits and blades.
Highly concentrated. Recommended Dilution of 20:1 for all tasks.
2 oz bottle makes 1.56 gallons of cutting fluid.
Excellent rust control on all metals; No in-process rust or rework.
Low foaming, low misting, water soluble.
Non-nitrited, non-halogenated, non-silicones or silicate, non-phenolic.
Rated insignificant under NFPA hazard rating for both fire and health. -
Read MoreQuick ViewBi-Metal Hole Saws
Bi-Metal hole saws are constructed using both High Speed Steel (HSS) for its strength, and spring steel for its flexibility. This allows fast cutting in a wide range of materials, with less breakage from tough jobs.
These hole saws also have a 4/6 variable pitch tooth combination to reduce vibration, and a deep cup for improved chip removal. -
Quick ViewMakita 16 Gauge Nibbler, 18V LXT
The 18V LXT® Lithium-Ion Cordless 16 Gauge Nibbler (XNJ01) provides contractors with another 18V LXT® metal cutting solution. The XNJ01Z is engineered for cutting corrugate metal roof decking, sheet metal, and stainless steel, and it will do the job without the cord. It is ideal for metal roofing and decking contractors, HVAC, and metal fab shop work.
The XNJ01Z is powered by a Makita-built motor that delivers 1,900 strokes-per-minute (SPM) for fast and smooth cutting. The die holder rotates 360° to meet the demands of the cutting direction, with a cutting radius of 1-3/4” (inner edge) and 2” (outer edge). When cutting, the metal chips are conveniently disposed below the cutting material, which helps prevent damage to the work surface. -
Quick ViewMakita 1/4″, 3/8″ Threaded Rod Cutter, 18V LXT
Makita has delivered a cordless cutting solution for steel rod cutting with the 18V LXT® Brushless Cordless Threaded Rod Cutter. It will make up to 1,300 cuts of 3/8” coarse thread threaded rod and 1,200 cuts of 3/8” coarse thread stainless steel threaded rod with a 5.0Ah battery (sold separately). The compact design makes the XCS03Z ideal for overhead cutting of installed threaded rod. Provides spark-free cuts that are clean and burr-free allowing easy hand-threading of fastener or nut.
-
Quick ViewMakita Oscillating Multi-Tool, 18V LXT
Trades of all kinds are turning to oscillating multi-tools for a range of applications, and the Makita 18V LXT® Lithium-Ion Cordless Multi-Tool delivers corded speed and power without the cord. The XMT03Z is engineered with additional features like reduced vibration and lower noise for improved performance, and is ideal for cutting, sanding, scraping, grout removal, and more.
-
Quick ViewMakita 14″ Chop Saw 15 AMP
The Makita 14” Cut-Off Saw (LW1401) is a metal-cutting solution built for light gauge metal stud and strut, pipe, all thread, conduit, tubing, rebar, and more. The 15 AMP motor delivers 3,800 RPM for the most demanding metal cutting applications. It is engineered to cut up to 5″ round stock, 4-11/16” square tube, and 4” x 7-5/8” or 2-3/4” x 9-1/8” rectangular tubing. It also features fence adjustment up to 45 degrees right or left, and a “tool-less” vice adjustment for increased productivity. The LW1401 weighs only 37 pounds with a locking pin that secures the cutting head in the down position for easy transport and storage. Additional features include a large ergonomic handle and two-stage lock-off power button.
-
Read MoreQuick ViewHole Saw Kits
These hole saw kits contain the most common sizes needed on the jobsite, held in a durable, custom fit, plastic case. They each contain pilot bits, a small arbor with 1/4″ shank, and a large arbor with 7/16″ shank.
The Electrician’s Kit includes:
7/8″, 1-1/8″, 1-3/8″, 1-3/4″, 2″, 2-1/2″ hole saws, and small & large arbors with pilot bits.
The Plumber’s Kit includes:
3/4″, 7/8″, 1-1/8″, 1-1/2″, 1-3/4″, 2-1/4″ hole saws, and small and large arbors with pilot bits.
(Case color and design may vary.) -
Quick ViewMakita Adjustable Miter Saw Stand with Extensions
The Large Rising Base Miter Saw Stand (WST01N) is a versatile and durable accessory for a range of pro trades, wherever the job takes them. The WST01N has five height configurations and offers material support extensions that extend up to 9 ft. to support long crown molding, and folds in seconds for easy portability. In addition, the 12-1/8” wide aluminum feed roller and adjustable material stop are engineered for increased speed on repetitive cuts. Convenience features include a spring loaded mechanism for quick and easy set-ups, solid rubber wheels for easy job site portability, and compatibility (it will fit all Makita miter saws, sold separately).
The new stand is the perfect companion to a Makita miter saw for a broad range of cutting applications including crown molding, baseboard, case and base, and long wood materials.
