Makita Corded, Gas, & Air Tools Archives - Page 2 of 5

Quick View

Makita 3.0HP Big bore air compressor

Makita’s 3.0 HP Air Compressor is equipped with Makita’s Big Bore™ engineered pump cylinder and piston for higher output for two nailers, with less noise and improved jobsite performance. The MAC5200 delivers industrial power and results with improved durability and includes rugged wheels and folding handle for easy transport.

The MAC5200 is powered by a 3.0 HP motor with built-in thermal overload for additional protection. The Makita Big Bore™ engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC5200 has an oil lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency.
Quick View

Makita 14″ Chop Saw 15 AMP

The Makita 14” Cut-Off Saw (LW1401) is a metal-cutting solution built for light gauge metal stud and strut, pipe, all thread, conduit, tubing, rebar, and more. The 15 AMP motor delivers 3,800 RPM for the most demanding metal cutting applications. It is engineered to cut up to 5″ round stock, 4-11/16” square tube, and 4” x 7-5/8” or 2-3/4” x 9-1/8” rectangular tubing. It also features fence adjustment up to 45 degrees right or left, and a “tool-less” vice adjustment for increased productivity. The LW1401 weighs only 37 pounds with a locking pin that secures the cutting head in the down position for easy transport and storage. Additional features include a large ergonomic handle and two-stage lock-off power button.
Quick View

Makita 12″ Dual Bevel Sliding Compound Miter Saw

The Makita 12” Dual-Bevel Sliding Compound Miter Saw with Laser (model LS1219L) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (6-3/4”) and crown molding (8” nested). It will also make 15” crosscuts at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0° to 48° (left and right).
Quick View

Makita Recipro Sawzall w/Cord – 15 AMP

Makita’s Reciprocating Saw with AVT® (model JR3070CTH) delivers superior power and performance with less vibration. The JR3070CTH is equipped with Anti-Vibration Technology (AVT®), a internal counterbalance system engineered inside the tool that significantly reduces vibration. The result is faster, more efficient cutting and less vibration in the tool.
Quick View

Makita Recipro Sawzall w/Cord – 11 AMP

The Makita 11-Amp Reciprocating Saw (model JR3050T) combines a powerful 11 AMP motor with less weight (7.3 lbs.) for all day use and improved performance. The 11 AMP motor with variable speed (0-2,800 SPM) has a 1-1/8 inch blade stroke for efficient cutting. It is ideal for metal cutting, wood cutting, drywall and plaster, plastics, remodeling, and demolition applications.
Quick View

Makita 1-9/16″ Spline Rotary Hammer w/Cord

The Makita HR4041C 1-9/16 in. Spline-Shank Rotary Hammer Drill features a powerful 11 Amp motor engineered with field-core interlocking steel laminations, a dual ball-bearing armature and a large-surface commutator for an efficient transfer of power. It delivers up to 230 – 460 RPM and 1,300 – 2,600 BPM and has 2 modes for hammering only and hammering with rotation. Soft-start functionality facilitates control and improved accuracy, while sequential impact timing promotes faster work.
Quick View

Makita 1-9/16″ SDS Max AVT Rotary Hammer w/Cord

The 1-9/16” AVT® Rotary Hammer (model HR4013C) has 45% less vibration and 20% more impact energy than the previous model. It is engineered with enhanced Anti-Vibration Technology (AVT®), a synchronized three-component system for significantly less vibration. The result of the enhanced AVT® is a category-leading vibration rating of 5m/s².

The powerful 11 AMP motor delivers 8.4 ft. lbs. (11.4 Joules) of impact energy, 20% more than the previous model for faster drilling. An added feature is the option of lock-on or trigger-activated in the “chipping only” mode, with a push button start/stop control for more convenient operation.
Quick View

Makita 1-9/16″ SDS MAX Rotary Hammer w/Cord, 10 AMP

The Makita 1-9/16″ Rotary Hammer (model HR4002) has a powerful 10 AMP motor that delivers 2,500 BPM for the most demanding applications. The HR4002 includes a torque limiting clutch that is engineered to prevent gear damage by automatically disengaging gears if the bit binds. The “no hammering when idling” function helps increase tool life, and the soft grip handle provides increased comfort on the job.
Quick View

Makita 1-1/8″ SDS+ Rotary Hammer w/Cord

Model HR2811F is a versatile, high-powered rotary hammer with an L-shape design ideal for horizontal work. The hammer accepts SDS-PLUS bits, and is powered by a 6.7 AMP variable speed motor delivering 2.7 Joules of impact energy. The HR2811F features 3-mode operation for “rotation only”, “hammering with rotation”, or “hammering only” for multiple applications, with 0-1,100 RPM and 0-4,500 BPM. The torque limiting clutch prevents gear damage by automatically disengaging gears if the bit binds. The HR2475 has an LED light for improved illumination of the work surface.
Quick View

Makita 1″ SDS+ HEPA Rotary Hammer Pistol Grip

The Makita 1” AVT® Rotary Hammer with HEPA Dust Extractor (model HR2651, with Pistol Grip) is a total solution that combines efficient drilling and chipping with reduced vibration and improved dust extraction. The HR2651 is engineered with Anti-Vibration Technology (AVT®), an internal counterbalance system for significantly less vibration. It has a built-on dust extractor that captures concrete dust during drilling. The HR2651 combines these performance features in a compact size. It is ideal for a range of applications including overhead drilling into concrete, wood and metal, removing tile, and more.
Quick View

Makita 1″ SDS+ Rotary Hammer w/D-Handle

The Makita 1” AVT® Rotary Hammer (model HR2641, with D-Handle) is engineered with Anti-Vibration Technology (AVT®), an internal counterbalance system for significantly less vibration. The HR2641 combines performance and power with less vibration in a compact size, and is ideal for a range of applications including overhead drilling.

The HR2641 is engineered for a range of applications including overhead drilling into concrete, wood and metal, removing tile, and more. It is ideal for a range of trades including masons, plumbers, electricians, sprinkler installers, city maintenance crews, and general contractors seeking a best-in-class 1” rotary hammer.
Quick View

Makita 5/8″ Hammer Drill

The Makita 5/8 in. Hammer Drill comes with a powerful motor. It can be used for rotation only applications or hammering with rotation applications. This hammer drill operates at 2,800 RPM and 44,800 BPM to help with most projects. The hammer drill is lightweight and can be held comfortably with its soft grip handle. This hammer drill has a large drilling capacity. It has a lock-on button for continuous usage.