3M Fire Barrier Sealant IC 15 WB+

Quick View

STI BIOSTOP® 750, 5 Gallon

BIOSTOP® 750 is a water-based sealant that comes in three different grades (spray mastic, Self-leveling and Caulk grade) and two colors (red and white). Ideal for use in construction joints such as top of the wall, curtain wall perimeter, expansion, control, etc., and for general construction gaps and voids. The mastic spray is designed for spray application and a economical means of installation on long joint runs.

Quick View

STI BIOSTOP 1-1/2″ Fire Rated Pipe Collar

Pipe Collars are prefabricated for open and closed through-penetration firestop systems using 1 1/2″(38 mm) to 6″ (152 mm) plastic pipe. An easy locking tab assures easy installation. The collar design greatly reduces the time and expense that is required to install competitive collars.

Quick View

3M IC 15WB Intumescent Sealant

Designed to prevent the spread of fire, smoke and noxious gas, 3M™ Fire Barrier Sealant IC 15WB+ is a one-part, gun-grade, latex-based, intumescent firestop sealant. This firestop sealant provides up to 3-hour fire protection in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115. In addition, this product is fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079). This sealant has been formulated to form a monolithic firestop seal that also helps minimize sound transfer, acting as a barrier to airborne sound transmission (STC-Rating of 54 when tested in a STC 54-rated wall assembly)
Recommended Applications: HVAC ducts and vents; Metallic and non-metallic pipes, including CPVC pipes; Blank openings; Single and bundled cables; Insulated pipe; Pipe and cable through-penetrations; Busways; Combos; Rated wall, floor and floor-ceiling assemblies; Static construction joints.

Quick View

SpecSeal Putty Tube or Pad

SSP Putty & Putty Pads
SpecSeal SSP Firestop Putty excels at sealing cabling penetrations and outlet boxes. SSP Putty is non-hardening and easily hand works around grouped cabling penetrations forming a re-enterable seal allowing for future work. When applied with outlet boxes, SSP Putty easily works into voids and seams forming a continuous seal against fire and the products of combustion.

Quick View

3M™ Fire Barrier Moldable Putty Pads

Our 3M™ Fire Barrier Moldable Putty Pads MPP+ are a one-part firestop material used in various fire-rated assemblies, such as electrical box protection. Designed to prevent the spread of fire, smoke and noxious gasses, this intumescent material comes ready to use in convenient 1/10” (2.54 mm) thick pads that are conformable by hand with no mixing or tools. Pads are firestop tested up to 4 hours.
Recommended Applications

Protection of membrane penetrations for listed metallic and non-metallic electrical boxes
Wall opening protective to meet building requirements
Seal gaps between cables in multiple penetrations (including fiber optic inner duct)
Insulated pipe, electrical conduit and metal pipe penetrations

Quick View

Fire Safing Insulation Deck Plugs 4.5″ to 3.5″ Taper, X 48″L

Fire Safing Deck Plugs are precision-cut from noncombustible UL classified high-density mineral wool panels. They are precision sized to fit into the fluted profile of metal decks encountered at top-of-wall joints.

Quick View

SpecSeal Collar for Plastic Pipes

SpecSeal SSC Firestop Collars are factory-manufactured firestop devices sized to plastic pipes of up to 6 in. Trade Size. SSC Collars consist of a restraining collar with a factory applied intumescent ensuring the correct amount of material is applied every time. Under fire exposure, SSC Collars quickly expand and collapse combustible piping forming a dense char, resisting the passage of smoke and flame.

Quick View

3M Fire Dam 150 Elastomeric

Our 3M™ Fire Barrier Sealant FD 150+ is a gun-grade, latex-based, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. When properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to a fire and exhibits excellent adhesion to a full range of construction substrates.
We have the red version in stock, but it is also available in blue and limestone grey.

Recommended Applications: Construction joints; Piping, all non-combustible and small diameter combustible; Cables.

Quick View

SpecSeal LCI300 Sealant

SpecSeal® LCI Sealant is a versatile and economical intumescent sealant that has excellent caulking properties as well as high build properties on vertical or overhead surfaces. This single component sealant may be caulked (standard cartridge or bulk loaded), knifed or troweled. In addition, SpecSeal® LCI Sealant does not contain PCB’s or asbestos.
SpecSeal® LCI Sealant is storage stable (when stored according to the manufacturer’s recommendations), and will not separate or shrink when dried (when applied according to the manufacturer's recommendations). SpecSeal® LCI Sealant will adhere to all common construction and penetrant materials and contains no solvents that might adversely effect plastic pipes or cable jackets.

Quick View

SpecSeal Silicone Joint Sealant

SpecSeal® SIL Silicone Firestop Sealant is a one-part, neutral-curing silicone sealant exhibiting superior performance in applications where sealing openings in walls and floors are needed to control the spread of fire, smoke, toxic gasses, and water during fire conditions.
SpecSeal® SIL Silicone Firestop Sealant is available in non-sag (SIL300) and self-leveling (SIL300SL) grades and may also be used to seal vertical and horizontal joints between metals, masonry, concrete and other common construction materials. SpecSeal® SIL Silicone Firestop Sealant is specially designed for use in static or dynamic joints. SpecSeal® SIL Silicone Firestop Sealant reacts with atmospheric moisture to form a high-strength, durable seal that will adhere to most building substrates without the use of primers. SpecSeal® products do not contain asbestos or PCBs.