3M™ Fire Barrier Moldable Putty Pads
Our 3M™ Fire Barrier Moldable Putty Pads MPP+ are a one-part firestop material used in various fire-rated assemblies, such as electrical box protection. Designed to prevent the spread of fire, smoke and noxious gasses, this intumescent material comes ready to use in convenient 1/10” (2.54 mm) thick pads that are conformable by hand with no mixing or tools. Pads are firestop tested up to 4 hours.
Recommended Applications
- Protection of membrane penetrations for listed metallic and non-metallic electrical boxes
- Wall opening protective to meet building requirements
- Seal gaps between cables in multiple penetrations (including fiber optic inner duct)
- Insulated pipe, electrical conduit and metal pipe penetrations
- Description
- Properties
- Data Sheets & Downloads
Pliable, Conformable and Shapeable for Exacting Coverage
For applications requiring conformable coverage, these pliable 3M™ Fire Barrier Moldable Putty Pads MPP+ meet a full range of firestop needs that would be impractical with strips, wraps or rolls. Ready to use in convenient 1/10" (2.54 mm) thick pads, this firestop material is designed for excellent adhesion to most construction substrates and is non-corrosive when applied to metal — ideal for use with listed steel or plastic electrical outlet boxes. It is also safe for applications including synthetic cable jackets, making it suitable for firestopping cable bundles. It won't crumble or dry out, exhibits excellent aging properties and is re-enterable to save time and money after installation. And the pads are extremely simple and cost-effective to install: technicians mold the material by hand directly onto the substrate without mixing or tools. For larger applications, self-adhering pads can be molded together.
Recommended Applications
- Protection of membrane penetrations for listed metallic and non-metallic electrical boxes
- Wall opening protective to meet building requirements
- Seal gaps between cables in multiple penetrations (including fiber optic inner duct)
- Insulated pipe, electrical conduit and metal pipe penetrations
Fully Tested and Approved
Our intumescent 3M™ Fire Barrier Moldable Putty Pads MPP+ are firestop tested up to 4 hours in accordance with ASTM E 814 (UL 1479). They are tested in accordance with ASTM E 119 (UL 263) up to 2 hours when installed in accordance with the UL wall-opening protective listing (UL Category CLIV), and help reduce noise transfer (STC-Rating of 52 when tested on back-to-back electrical boxes).
- Pliable one-part intumescent firestop material is designed for wall openings and through penetrations
- Provides draft and cold smoke seal, helps reduce noise transfer
- Firestop tested for through penetration and membrane applications for up to 4 hours in accordance with ASTM E 814 (UL 1479)
- Excellent adhesion to a wide range of construction materials
- Non-corrosive to metal, and compatible with synthetic cable jackets
- Applied by hand, with no mixing or tools
Related Products
-
Read MoreQuick View
SpecSeal SSW Wrap Strip, Pre-Cut or 12 Ft Roll
-
Read MoreQuick View
SpecSeal SSB Firestop Pillows
SpecSeal SSB Firestop Pillows consist of a mineral fiber core material sealed with a water-resistant intumescent membrane. This coated core material is then heat-sealed in a tough, nonirritating, fireretardant poly bag. They easily compress and conform around any penetrant. Equally suited for new or existing conditions, SpecSeal Pillows make short work of even the most complex through-penetration firestop conditions.
-
SpecSeal AS205 Elastomer Spray, 5 Gal
SpecSeal® AS200 Elastomeric Spray is designed primarily for the protection of construction joints, curtain wall safing gaps, and certain through-penetrations.
This fire protective joint coating is a water-based, non-halogenated elastomeric coating that contains no solvents, inorganic fibers, nor asbestos. The coating dries to form a flexible, moisture resistant film that can adhere to all common construction surfaces. It provides for up to 50 percent movement. SpecSeal® AS200 is thixotropic and is capable of being applied by airless spray, brush or trowel. -
Firestop Closet Toilet Flange Gasket
SpecSeal Closet Flange Firestop Gaskets are one-piece, molded rubber, intumescent pads that install beneath a 3″ (76 mm) or 4″ (102 mm) closet flange to effectively firestop the opening. The die cut rubber gasket is perforated to delineate removable inserts sized to accommodate various outer diameters of toilet flanges.
-
Read MoreQuick View
SpecSeal LC 150 Series Sealant
SpecSeal LC 150 Endothermic Sealant is a latex-based gun grade firestop sealant for construction joints and non-combustible penetrations. SpecSeal® LC Sealant is engineered to adhere well to virtually all construction surfaces and may be applied using a standard caulk gun or by troweling with a standard mason’s trowel or with a putty knife. After application, LC Sealant cures to form a flexible seal against the propagation of fire. Under fire exposure, LC absorbs heat and releases water vapor resisting the progress of smoke and flame.
-
SPEC SEAL EZD22 EZ-PATH FIRE RATED PATHWAY
The EZ Path® Series 22 Fire Rated Pathway is a maintenance-free pathway device designed to allow cables to penetrate fire-rated walls without the need for firestopping. This device features a built-in fire sealing system that automatically adjusts to the amount of cables installed. Once installed in a fire barrier, cables can be easily added or removed at any time without the need to remove or reinstall firestopping materials.
-
Read MoreQuick View
SpecSeal Silicone Joint Sealant
SpecSeal® SIL Silicone Firestop Sealant is a one-part, neutral-curing silicone sealant exhibiting superior performance in applications where sealing openings in walls and floors are needed to control the spread of fire, smoke, toxic gasses, and water during fire conditions.
SpecSeal® SIL Silicone Firestop Sealant is available in non-sag (SIL300) and self-leveling (SIL300SL) grades and may also be used to seal vertical and horizontal joints between metals, masonry, concrete and other common construction materials. SpecSeal® SIL Silicone Firestop Sealant is specially designed for use in static or dynamic joints. SpecSeal® SIL Silicone Firestop Sealant reacts with atmospheric moisture to form a high-strength, durable seal that will adhere to most building substrates without the use of primers. SpecSeal® products do not contain asbestos or PCBs. -
SpecSeal FS200 2″ Ready Sleeve
SpecSeal Ready Sleeves are designed for new cabling penetrations where sleeves are required. Each Ready Sleeve kit includes a preformed steel sleeve with rolled edges, steel escutcheon plates with intumescent gaskets, and a dosage of our SpecSeal SSP Firestop Putty. The rolled edges of each Ready Sleeve eliminate the need for bushings while the included escutcheon plates and gaskets take the place of steel strut and strap supports.
SpecSeal® Ready® Sleeve Pathways are used to protect or support cables in both nonrated and rated construction. SpecSeal® Ready® Sleeve Pathways are suitable for use in all common constructions including concrete floors, concrete walls, concrete block walls, and gypsum board/stud wall assemblies up to 10” (254 mm) thick. -
3M IC 15WB Intumescent Sealant
Designed to prevent the spread of fire, smoke and noxious gas, 3M™ Fire Barrier Sealant IC 15WB+ is a one-part, gun-grade, latex-based, intumescent firestop sealant. This firestop sealant provides up to 3-hour fire protection in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115. In addition, this product is fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079). This sealant has been formulated to form a monolithic firestop seal that also helps minimize sound transfer, acting as a barrier to airborne sound transmission (STC-Rating of 54 when tested in a STC 54-rated wall assembly)
Recommended Applications: HVAC ducts and vents; Metallic and non-metallic pipes, including CPVC pipes; Blank openings; Single and bundled cables; Insulated pipe; Pipe and cable through-penetrations; Busways; Combos; Rated wall, floor and floor-ceiling assemblies; Static construction joints. -
Fire Safing 4″ X 24″ X 48″ , 4 Panels
Mineral Wool Fire Safing is designed to provide enhanced fire protection in perimeter fire containment systems, floor and wall penetrations, construction joints, and other firestopping applications. It is non-combustible, moisture-resistant, non-corrosive, non-deteriorating, mildew-resistant and vermin-resistant. Mineral Wool FireStop Safing is primarily used as a backing material for firestop caulks and sealants.