SpecSeal Cast In Place Device
Eliminate core-drilling and firestop after the concrete pour with SpecSeal CID Cast-In Firestop Devices. SpecSeal Cast-In Devices are a sleeve, concrete form and firestop rolled into a single device. SpecSeal Cast-In Devices are available in a range of sizes and heights to accommodate penetrant up to 6″ Trade Size penetrants and concrete depths of up to 36″.
- Additional information
- Description
- Properties
- Data Sheets & Downloads
Additional information
| Size | 2″, 3″, 4″, 6″ |
|---|
Eliminate core-drilling and firestop after the concrete pour with SpecSeal CID Cast-In Firestop Devices. SpecSeal Cast-In Devices are a sleeve, concrete form and firestop rolled into a single device. SpecSeal Cast-In Devices are available in a range of sizes and heights to accommodate penetrant up to 6" Trade Size penetrants and concrete depths of up to 36".
- Tested for combustible and non-combustible penetrants
- Variety of accessories available for any field condition
- Incorporates built in smoke and water resistant seal
- Usable in concrete floors as thin as 2-1/2"!
- Saves time. No firestopping step required
- Provides pre-installed fire and smoke sealing
- Provides added protection against transient water
- Adapts to a wide variety of construction conditions
- Pipes can be installed from top or bottom
- Four heights for a greater range of concrete depth
Related Products
-
Quick ViewSpecSeal FS200 2″ Ready Sleeve
SpecSeal Ready Sleeves are designed for new cabling penetrations where sleeves are required. Each Ready Sleeve kit includes a preformed steel sleeve with rolled edges, steel escutcheon plates with intumescent gaskets, and a dosage of our SpecSeal SSP Firestop Putty. The rolled edges of each Ready Sleeve eliminate the need for bushings while the included escutcheon plates and gaskets take the place of steel strut and strap supports.
SpecSeal® Ready® Sleeve Pathways are used to protect or support cables in both nonrated and rated construction. SpecSeal® Ready® Sleeve Pathways are suitable for use in all common constructions including concrete floors, concrete walls, concrete block walls, and gypsum board/stud wall assemblies up to 10” (254 mm) thick. -
Read MoreQuick ViewSpecSeal LCC Firestop Collar Series
The SpecSeal® LCC Collar is a factory-manufactured device designed to protect plastic pipes penetrating fire-rated walls and floors. Utilizing a heavy gauge galvanized metal collar to house a molded intumescent insert, the SpecSeal® LCC Firestop Collar is specifically sized to fit 1-1/2 in, 2 in, 3 in, and 4 in (38 mm, 51 mm, 76 mm and 102 mm) trade sized pipes. When exposed to temperatures in excess of 320°F (160°C), the SpecSeal® LCC Collar’s molded insert begins to expand (intumesce) rapidly to form a dense, highly insulative char. Its free expansion ranges from 32x to 64x original (pre-expanded) volume. Expansion continues up to 1,000°F (538°C).
-
Quick View
3M IC 15WB Intumescent Sealant
Designed to prevent the spread of fire, smoke and noxious gas, 3M™ Fire Barrier Sealant IC 15WB+ is a one-part, gun-grade, latex-based, intumescent firestop sealant. This firestop sealant provides up to 3-hour fire protection in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115. In addition, this product is fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079). This sealant has been formulated to form a monolithic firestop seal that also helps minimize sound transfer, acting as a barrier to airborne sound transmission (STC-Rating of 54 when tested in a STC 54-rated wall assembly)
Recommended Applications: HVAC ducts and vents; Metallic and non-metallic pipes, including CPVC pipes; Blank openings; Single and bundled cables; Insulated pipe; Pipe and cable through-penetrations; Busways; Combos; Rated wall, floor and floor-ceiling assemblies; Static construction joints. -
Quick View
3M Fire Dam 150 Elastomeric
Our 3M™ Fire Barrier Sealant FD 150+ is a gun-grade, latex-based, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. When properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to a fire and exhibits excellent adhesion to a full range of construction substrates.
We have the red version in stock, but it is also available in blue and limestone grey.Recommended Applications: Construction joints; Piping, all non-combustible and small diameter combustible; Cables.
-
Quick View
Handi Foam, 24 Oz.
Handi-Foam® P30115 Gun Foam Sealant is designed to seal and fill small cracks, gaps, and voids. The P30115 Handi-Foam® Gun Sealant is ideal for projects that require you to apply the sealant from day to day.
Handi-Foam® Sealants cure when ambient moisture/humidity in the air reacts with the foam sealant creating a rigid, closed cell barrier against draft, noise, moisture and air infiltration. Handi-Foam® Sealants are tack free within 10 minutes and meet ASTM E-84 Class 1 for caulk and sealants. -
Read MoreQuick View
SpecSeal Putty Tube or Pad
SSP Putty & Putty Pads
SpecSeal SSP Firestop Putty excels at sealing cabling penetrations and outlet boxes. SSP Putty is non-hardening and easily hand works around grouped cabling penetrations forming a re-enterable seal allowing for future work. When applied with outlet boxes, SSP Putty easily works into voids and seams forming a continuous seal against fire and the products of combustion. -
Read MoreQuick View
SpecSeal SSS Sealant
SSS Intumescent Firestop Sealant
SpecSeal SSS Firestop Sealant is a premium grade water-based Intumescent firestop sealant. SpecSeal SSS Sealant incorporates a proprietary two-stage intumescent technology making it the go to choice for any combustible or non-combustible penetrants. As little as a 1/2″ applied depth of SSS Sealant is required to provide up to a 4 Hr Fire resistance rating when tested to ASTM E814/UL 1479. -
Read MoreQuick View
SpecSeal SSB Firestop Pillows
SpecSeal SSB Firestop Pillows consist of a mineral fiber core material sealed with a water-resistant intumescent membrane. This coated core material is then heat-sealed in a tough, nonirritating, fireretardant poly bag. They easily compress and conform around any penetrant. Equally suited for new or existing conditions, SpecSeal Pillows make short work of even the most complex through-penetration firestop conditions.
-
Quick View
SPEC SEAL EZD44 EZ-PATH FIRE RATED PATHWAY
The EZ Path® Series 44 Fire Rated Pathway is a maintenance-free pathway device designed to allow medium cable bundles to penetrate fire-rated walls without the need for firestopping. This device features a built-in fire sealing system that automatically adjusts to the amount of cables installed. Once installed in a fire barrier, cables can be easily added or removed at any time without the need to remove or reinstall firestopping materials.
-
Read MoreQuick View
SpecSeal ES100 Elastomeric Sealant, All
SpecSeal ES Sealant is a latex-based gun grade elastomeric firestop sealant designed for construction joint applications. Once cured, ES Sealant forms a flexible shield against the passage of fire and smoke, that can accommodate up to 25% compression/extension of the installed joint width. This material is also designed to restore sound attenuation properties to sound-rated ceilings and partitions.
