3M Fire Barrier FD 150+ Sealant
Tried and Tested Fire Protection
Ready-to-use, 3M™ Fire Barrier Sealant FD 150+ is a latex-based elastomeric sealant. This gun-grade sealant cures when dispensed to form a monolithic flexible firestop seal and, when properly installed, this product provides up to 4-hour fire protection in tested and listed systems. We formulated this sealant to help prevent the spread of fire, smoke and noxious gas and firestop joints and through penetrations through floor slabs, walls and other fire-rated building partitions and assemblies. This firestop sealant offers a continuous seal with ± 19% movement capability for construction joints and typical pipe movement and exhibits excellent adhesion to a full range of construction substrates.
- Description
- Downloads
- Applications
- Specifications
Description
- Firestop tested up to 3 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115
- Fire resistive joint system tested up to 4 hours in accordance with ASTM E 1966 (UL 2079)
- Continuous seal remains pliable and allows for typical pipe movement
- Water-based for easy installation, cleanup and disposal
- High-solids formula means limited shrinkage
- Re-enterable and repairable fire barrier sealant
- Multi-viscosity grade offers excellent sealant and caulking properties
- Sealant helps minimize noise transfer
Download the MSDS PDF: MSDS
Recommended Applications
- Construction joints
- Piping, all non-combustible and small diameter combustible
- Cables
Related Products
-
Read MoreQuick ViewSpecSeal LC 150 Series Sealant
SpecSeal LC 150 Endothermic Sealant is a latex-based gun grade firestop sealant for construction joints and non-combustible penetrations. SpecSeal® LC Sealant is engineered to adhere well to virtually all construction surfaces and may be applied using a standard caulk gun or by troweling with a standard mason’s trowel or with a putty knife. After application, LC Sealant cures to form a flexible seal against the propagation of fire. Under fire exposure, LC absorbs heat and releases water vapor resisting the progress of smoke and flame.
-
Quick ViewSTI BIOSTOP® 750, 5 Gallon
BIOSTOP® 750 is a water-based sealant that comes in three different grades (spray mastic, Self-leveling and Caulk grade) and two colors (red and white). Ideal for use in construction joints such as top of the wall, curtain wall perimeter, expansion, control, etc., and for general construction gaps and voids. The mastic spray is designed for spray application and a economical means of installation on long joint runs.
-
Quick View
3M Fire Barrier CP-25WB+
Dependable and Easy-to-Use Firestop Sealant
Tough and ready-to-use, 3M™ Fire Barrier Sealant CP 25WB+ is a high-performance, one-component, latex-based, intumescent sealant that dries to form a monolithic firestop seal. This sealant also acts as a barrier to airborne sound transmission. As penetrants are exposed to fire, the unique intumescent property of this material allows 3M™ Fire Barrier Sealant CP 25WB+ to expand and help maintain a firestop penetration seal for up to 4 hours. This sealant is designed to help control the spread of fire, smoke and noxious gases before, during and after exposure to a fire when installed in accordance with a listed through-penetration or fire-resistive joint assembly system (STC-Rating of 54 when tested in a STC 54-rated wall assembly). -
Quick View
Fire Safing Insulation Deck Plugs 4.5″ to 3.5″ Taper, X 48″L
Fire Safing Deck Plugs are precision-cut from noncombustible UL classified high-density mineral wool panels. They are precision sized to fit into the fluted profile of metal decks encountered at top-of-wall joints.
-
Quick View
BIO Fireshield Gasket, Double Outlet
BIOSTOP® Firestop Gasket is a single component fire rated gasket for use with electrical boxes when addressing the “24 inch rule”. It is mounted on the inside of the cover plate and installed at the same time as the cover plate, covering the opening and providing the necessary fire protection.
When exposed to heat, BIOSTOP® Firestop Gasket’s highly intumescent nature causes it to expand forming a char that will seal off the opening and prevent the spread of flames and limit the temperature rise on the unexposed surfaces. -
Quick View
SpecSeal FS200 2″ Ready Sleeve
SpecSeal Ready Sleeves are designed for new cabling penetrations where sleeves are required. Each Ready Sleeve kit includes a preformed steel sleeve with rolled edges, steel escutcheon plates with intumescent gaskets, and a dosage of our SpecSeal SSP Firestop Putty. The rolled edges of each Ready Sleeve eliminate the need for bushings while the included escutcheon plates and gaskets take the place of steel strut and strap supports.
SpecSeal® Ready® Sleeve Pathways are used to protect or support cables in both nonrated and rated construction. SpecSeal® Ready® Sleeve Pathways are suitable for use in all common constructions including concrete floors, concrete walls, concrete block walls, and gypsum board/stud wall assemblies up to 10” (254 mm) thick. -
Read MoreQuick View
SpecSeal Collar for Plastic Pipes
SpecSeal SSC Firestop Collars are factory-manufactured firestop devices sized to plastic pipes of up to 6 in. Trade Size. SSC Collars consist of a restraining collar with a factory applied intumescent ensuring the correct amount of material is applied every time. Under fire exposure, SSC Collars quickly expand and collapse combustible piping forming a dense char, resisting the passage of smoke and flame.
-
Read MoreQuick View
SpecSeal Silicone Joint Sealant
SpecSeal® SIL Silicone Firestop Sealant is a one-part, neutral-curing silicone sealant exhibiting superior performance in applications where sealing openings in walls and floors are needed to control the spread of fire, smoke, toxic gasses, and water during fire conditions.
SpecSeal® SIL Silicone Firestop Sealant is available in non-sag (SIL300) and self-leveling (SIL300SL) grades and may also be used to seal vertical and horizontal joints between metals, masonry, concrete and other common construction materials. SpecSeal® SIL Silicone Firestop Sealant is specially designed for use in static or dynamic joints. SpecSeal® SIL Silicone Firestop Sealant reacts with atmospheric moisture to form a high-strength, durable seal that will adhere to most building substrates without the use of primers. SpecSeal® products do not contain asbestos or PCBs. -
Read MoreQuick View
SpecSeal ES100 Elastomeric Sealant, All
SpecSeal ES Sealant is a latex-based gun grade elastomeric firestop sealant designed for construction joint applications. Once cured, ES Sealant forms a flexible shield against the passage of fire and smoke, that can accommodate up to 25% compression/extension of the installed joint width. This material is also designed to restore sound attenuation properties to sound-rated ceilings and partitions.
-
Read MoreQuick View
SpecSeal SSB Firestop Pillows
SpecSeal SSB Firestop Pillows consist of a mineral fiber core material sealed with a water-resistant intumescent membrane. This coated core material is then heat-sealed in a tough, nonirritating, fireretardant poly bag. They easily compress and conform around any penetrant. Equally suited for new or existing conditions, SpecSeal Pillows make short work of even the most complex through-penetration firestop conditions.
