3M Fire Barrier Sealant IC 15 WB+

Quick View

SpecSeal Restraint Collar, Pre-Cut or 25 Ft Roll

Metal strip for making restraint collar for SSW Intumescent strips
Cut to length, wrap around pipe with SSW strips in place
Forms collar to contain Blue or Red Strips
Roll is 25 Feet long

Quick View

SpecSeal SSS Sealant

SSS Intumescent Firestop Sealant
SpecSeal SSS Firestop Sealant is a premium grade water-based Intumescent firestop sealant. SpecSeal SSS Sealant incorporates a proprietary two-stage intumescent technology making it the go to choice for any combustible or non-combustible penetrants. As little as a 1/2″ applied depth of SSS Sealant is required to provide up to a 4 Hr Fire resistance rating when tested to ASTM E814/UL 1479.

Quick View

SpecSeal LCI300 Sealant

SpecSeal® LCI Sealant is a versatile and economical intumescent sealant that has excellent caulking properties as well as high build properties on vertical or overhead surfaces. This single component sealant may be caulked (standard cartridge or bulk loaded), knifed or troweled. In addition, SpecSeal® LCI Sealant does not contain PCB’s or asbestos.
SpecSeal® LCI Sealant is storage stable (when stored according to the manufacturer’s recommendations), and will not separate or shrink when dried (when applied according to the manufacturer's recommendations). SpecSeal® LCI Sealant will adhere to all common construction and penetrant materials and contains no solvents that might adversely effect plastic pipes or cable jackets.

Quick View

3M IC 15WB Intumescent Sealant

Designed to prevent the spread of fire, smoke and noxious gas, 3M™ Fire Barrier Sealant IC 15WB+ is a one-part, gun-grade, latex-based, intumescent firestop sealant. This firestop sealant provides up to 3-hour fire protection in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115. In addition, this product is fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079). This sealant has been formulated to form a monolithic firestop seal that also helps minimize sound transfer, acting as a barrier to airborne sound transmission (STC-Rating of 54 when tested in a STC 54-rated wall assembly)
Recommended Applications: HVAC ducts and vents; Metallic and non-metallic pipes, including CPVC pipes; Blank openings; Single and bundled cables; Insulated pipe; Pipe and cable through-penetrations; Busways; Combos; Rated wall, floor and floor-ceiling assemblies; Static construction joints.

Quick View

SpecSeal AS205 Elastomer Spray, 5 Gal

SpecSeal® AS200 Elastomeric Spray is designed primarily for the protection of construction joints, curtain wall safing gaps, and certain through-penetrations.
This fire protective joint coating is a water-based, non-halogenated elastomeric coating that contains no solvents, inorganic fibers, nor asbestos. The coating dries to form a flexible, moisture resistant film that can adhere to all common construction surfaces. It provides for up to 50 percent movement. SpecSeal® AS200 is thixotropic and is capable of being applied by airless spray, brush or trowel.

Quick View

3M™ Fire Barrier Moldable Putty Pads

Our 3M™ Fire Barrier Moldable Putty Pads MPP+ are a one-part firestop material used in various fire-rated assemblies, such as electrical box protection. Designed to prevent the spread of fire, smoke and noxious gasses, this intumescent material comes ready to use in convenient 1/10” (2.54 mm) thick pads that are conformable by hand with no mixing or tools. Pads are firestop tested up to 4 hours.
Recommended Applications

Protection of membrane penetrations for listed metallic and non-metallic electrical boxes
Wall opening protective to meet building requirements
Seal gaps between cables in multiple penetrations (including fiber optic inner duct)
Insulated pipe, electrical conduit and metal pipe penetrations

Quick View

STI BIOSTOP 1-1/2″ Fire Rated Pipe Collar

Pipe Collars are prefabricated for open and closed through-penetration firestop systems using 1 1/2″(38 mm) to 6″ (152 mm) plastic pipe. An easy locking tab assures easy installation. The collar design greatly reduces the time and expense that is required to install competitive collars.

Quick View

3M Fire Barrier CP-25WB+

Dependable and Easy-to-Use Firestop Sealant
Tough and ready-to-use, 3M™ Fire Barrier Sealant CP 25WB+ is a high-performance, one-component, latex-based, intumescent sealant that dries to form a monolithic firestop seal. This sealant also acts as a barrier to airborne sound transmission. As penetrants are exposed to fire, the unique intumescent property of this material allows 3M™ Fire Barrier Sealant CP 25WB+ to expand and help maintain a firestop penetration seal for up to 4 hours. This sealant is designed to help control the spread of fire, smoke and noxious gases before, during and after exposure to a fire when installed in accordance with a listed through-penetration or fire-resistive joint assembly system (STC-Rating of 54 when tested in a STC 54-rated wall assembly).

Quick View

3M Fire Dam 150 Elastomeric

Our 3M™ Fire Barrier Sealant FD 150+ is a gun-grade, latex-based, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. When properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to a fire and exhibits excellent adhesion to a full range of construction substrates.
We have the red version in stock, but it is also available in blue and limestone grey.

Recommended Applications: Construction joints; Piping, all non-combustible and small diameter combustible; Cables.

Quick View