Products Archive - Page 64 of 5 - Thread Source

Read More
Quick View

DeWalt Wood Knockers II

DeWalt Wood-Knocker concrete inserts are installed onto wooden forms used to support newly poured concrete floor slabs, roof slabs or walls. When the forms are stripped, the color-coded flange is visibly embedded in the concrete surface. The inserts allow the attachment of steel threaded rod or threaded bolts in sizes ranging from 1/4″ to 3/4″ in diameter. The hex impact plate offers resistance to rotation within the concrete as a steel threaded rod or threaded bolt is being installed.
Read More
Quick View

Ramset Washer Pin Fastening Systems

Designed to drive flush into steel and concrete
Consistent and optimum quality in every pin
Washer increases bearing surface against material
Read More
Quick View

Ramset Fastening Pins

The Ramset Fastening System Drive Pins are powder actuated pins used to attach material to concrete or steel. The pins are specifically fabricated for toughness and durability.
The 1/2″ and 5/8″ pins are knurled for extra grip, and are specifically engineered for use in structural-quality steel.
The 3/4″ and 1″ pins are perfect for attaching metal track to concrete.
The 1″ up to 2″ pins are sized for attaching furring strips or plywood to concrete.
The 2-1/2″ and 3″ pins are designed to attach 2×4’s to concrete.
Quick View

Makita 9″ Cut Off / Angle Grinder, 18V X2 LXT

Makita delivers corded grinding performance without the cord with the 18V X2 (36V) LXT® Lithium-Ion Brushless 9” Paddle Switch Cut-Off/Angle Grinder with Electric Brake and AWS™ (XAG23ZU1 tool only). It’s powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. For the most demanding applications, Makita’s exclusive Automatic Speed Change™ technology automatically adjusts speed and torque during operation for optimal performance. The XAG23ZU1 is ideal for grinding and cutting a wide range of materials including tile, concrete, pipe, conduit, and more.
For improved efficiency, it’s equipped with Auto-Start Wireless System (AWS™) technology. AWS™ utilizes Bluetooth® technology for wireless communication between the tool and dust extractor (sold separately). When the trigger is engaged, the AWS™-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS™ is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running.
Quick View

Makita Guide Rail Connector

The Makita Guide Rail Connectors are designed to join guide rails together to allow the user to make longer cuts while maintaining the accuracy they desire. The connectors install quickly for added convenience. These versatile connectors work with Makita guide rails as well as select competitor rails.
Quick View

Makita DML809 Adjustable Beam Work Light, 18V LXT

The Makita® Portable Tripod Light Stand (GM00002073) is a durable and convenient elevated stand for up to two Cordless/Corded Work Lights (DML809 and DML811, sold separately). The Tripod Stand has a durable metal construction for longer life and sturdy three-legged design for maximum stability. The Tripod Stand telescopes up to 76” and allows for easy 360° rotation of the light. It collapses for optimal portability when the job is through.
Quick View

Makita DML811 Work Light, AC & 18V LXT

The 18V LXT® Lithium-Ion Cordless/Corded Work Light (DML811) offers the convenience of cordless or corded operation, and provides bright and even illumination for work spaces. At full brightness it provides 3,000 lumens of light, and 750 lumens on low mode. Adjusting knobs enable the user to direct the light to the desired angle. The Work Light can be mounted on an optional tripod stand (sold separately). Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions.
The fast-charging 18V LXT Lithium-Ion 5.0Ah Battery (sold separately) delivers 11 hours of continuous illumination on the low setting.
Quick View

Makita DML810 Wobble Light, AC & 18V LXT

The 18V X2 LXT® Cordless/Corded Upright L.E.D. Area Light (DML810) is a self-righting light that stays in an upright position. The flood light features a self-balancing design that keeps the light in an upright position, even when knocked over, and delivers 5,500 / 3,000 / 1,500 lumens on High / Medium / Low.
L.E.D. lights effectively illuminate work area without the high heat of halogens and incandescent lights. This light illuminates 360 degrees for full illumination of the space, or 180 degrees to the left or right.
Quick View

Makita Xenon Black Flashlight, 18V LXT

The 18V X2 LXT® Lithium-Ion Cordless/Corded Work Light (DML809) offers the convenience of cordless or corded operation, and provides bright and even illumination for work spaces. At full brightness it provides 10,000 lumens of light, and 2,000 lumens on low mode. Adjusting knobs enable the user to direct the light to the desired angle. The Work Light can be mounted on an optional tripod stand (sold separately). Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions.

The fast-charging 18V LXT® Lithium-Ion 5.0Ah Battery (sold separately) delivers 8.5 hours of continuous illumination on the low setting.
Quick View

Makita 55″ Guide Rail for Use with Plunge Saw

The Makita 55″ Plunge Saw Guide Rail (194368-5), when used with a Makita Plunge Circular Saw (SP6000) is a more portable option to a table saw for ripping sheet material. The Guide Rail interacts with the Plunge Saw (not included) to provide smooth, dead-on straight cuts. For use with the Makita 6-1/2 in. Plunge Circular Saws (models SP6000K/K1 and SP6000J/J1).
Read More
Quick View

Demo Products
Quick View

Makita XRM11 Bluetooth Jobsite Speaker, 18V XLT

Users can surround themselves with music, on or off the job site, with the new Makita® 18V LXT® / 12V max CXT® Cordless Bluetooth Job Site Speaker. Two speakers can be connected to listen in true stereo sound or connect up to ten speakers wirelessly to hear music throughout the job site. The speaker delivers rich full sound from one 4″ woofer with a passive radiator and one 1.4″ tweeter.
Compatible with a 12V max CXT and 18V LXT Lithium-Ion Batteries, this radio provides more flexibility for users. An included AC Adapter offers corded operation.