Makita 9″ Cut Off / Angle Grinder, 18V X2 LXT

Makita Lock Nut Wrench for Angle Grinders
Makita 16 Gauge Nibbler, 18V LXT

Makita 9″ Cut Off / Angle Grinder, 18V X2 LXT

Makita delivers corded grinding performance without the cord with the 18V X2 (36V) LXT® Lithium-Ion Brushless 9” Paddle Switch Cut-Off/Angle Grinder with Electric Brake and AWS™ (XAG23ZU1 tool only). It’s powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. For the most demanding applications, Makita’s exclusive Automatic Speed Change™ technology automatically adjusts speed and torque during operation for optimal performance. The XAG23ZU1 is ideal for grinding and cutting a wide range of materials including tile, concrete, pipe, conduit, and more.
For improved efficiency, it’s equipped with Auto-Start Wireless System (AWS™) technology. AWS™ utilizes Bluetooth® technology for wireless communication between the tool and dust extractor (sold separately). When the trigger is engaged, the AWS™-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS™ is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running.

Add to quote
SKU: MAKXAG23ZU1 Category: Tags: , , , ,
  • Description
  • Features

Makita delivers corded grinding performance without the cord with the 18V X2 (36V) LXT® Lithium-Ion Brushless 9” Paddle Switch Cut-Off/Angle Grinder with Electric Brake and AWS™ (XAG23ZU1 tool only). It's powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. For the most demanding applications, Makita’s exclusive Automatic Speed Change™ technology automatically adjusts speed and torque during operation for optimal performance. The XAG23ZU1 is ideal for grinding and cutting a wide range of materials including tile, concrete, pipe, conduit, and more.
For improved efficiency, it’s equipped with Auto-Start Wireless System (AWS™) technology. AWS™ utilizes Bluetooth® technology for wireless communication between the tool and dust extractor (sold separately). When the trigger is engaged, the AWS™-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS™ is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running.
Additional features include the BL™ Brushless Motor, Active Feedback-sensing technology (AFT®), and an electric brake that stops the grinding or cut-off wheel in 2 seconds or less. The BL™ Brushless Motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life. AFT® turns the motor off if rotation speed suddenly slows or the wheel is forced to a stop.
POWER : Brushless Motor eliminates carbon brushes, enabling the Motor to run cooler and more efficiently
TECHNOLOGY : Two 18V LXT® Lithium-Ion batteries deliver corded power (batteries not included)
CONTROL : AFT® turns the motor off if rotation of the wheel is suddenly forced to stop
DUST MANAGEMENT : Dust Extraction Cutting Guard and AWS™ Dust Extractor available for concrete cutting Applications
INCLUDES : Grinding wheel, cut-off wheel, grinding wheel guard, and cut-off wheel guard

  • The BL™ Brushless Motor delivers 6,000 RPM
  • Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop
  • Electric brake stops the grinding or cut-off wheel in 4.5 seconds or less for maximum productivity
  • Auto-start Wireless System (AWS™) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor
  • Dust Extraction Cutting Guard is available for concrete cutting applications
  • Automatic Speed Change™ technology adjusts speed and torque during operation for optimum performance
  • Soft start suppresses start-up reaction for smooth start-ups and longer gear life
  • Anti-restart protection engineered to prevent motor start up when battery is inserted with switch locked on
  • Rear handle paddle switch with no lock-on feature
  • Vibration absorbing back handle is isolated from the motor housing effectively reducing vibration to the operator's hands
  • Rubberized soft grip handle provides increased comfort on the job
  • L.E.D. battery charge indicator alerts user of drained power for each of the two batteries
  • Large spindle lock button for easier wheel changes while wearing gloves
  • Wire mesh intake covers are engineered to prevent debris from entering motor
  • Tool-less wheel guard for quick and easy adjustments
  • Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
  • Protective roll cage helps protect batteries from damage due to common everyday handling
  • Includes Grinding wheel, cut-off wheel, grinding wheel guard, and cut-off wheel guard
  • 3-year limited warranty

Related Products

  •
    Quick View

    Makita Xenon Adjustable Beam Flashlight, 18V LXT

    The Makita 18V LXT® Lithium-Ion Xenon Flashlight provides high illumination without the cord. It features a compact and ergonomic design for ease of use and a head which can be set in 4 positions for versatile use. This flashlight has a high illumination Xenon bulb that emits 4,500 Lux, with up to 4 hours of illumination on a single charge of an 18V LXT® Lithium-Ion 3.0Ah battery.

  •
    Quick View

    Makita 1/4″, 3/8″ Threaded Rod Cutter, 18V LXT

    Makita has delivered a cordless cutting solution for steel rod cutting with the 18V LXT® Brushless Cordless Threaded Rod Cutter. It will make up to 1,300 cuts of 3/8” coarse thread threaded rod and 1,200 cuts of 3/8” coarse thread stainless steel threaded rod with a 5.0Ah battery (sold separately). The compact design makes the XCS03Z ideal for overhead cutting of installed threaded rod. Provides spark-free cuts that are clean and burr-free allowing easy hand-threading of fastener or nut.

  •
    Quick View

    Makita Brushless Robotic Vacuum, 18V X2 LXT

    The 18V X2 LXT® Brushless Robotic Vacuum is a cordless solution that automatically cleans large flooring spaces in commercial environments. The DRC200Z features an efficient brushless motor engineered for extended run time and longer tool life. Just turn it loose with two fully-charged 18V LXT® Lithium-Ion 5.0Ah batteries (sold separately) and it will clean approximately 5,380 sq.ft. of hard flooring (or up to 200 minutes of continuous operation in “Main Brush plus Vacuum” mode).

  •
    Quick View

    Makita Coffee Maker, 18V LXT

    Get fresh brewed coffee wherever the job takes you with the 18V LXT® / 12V max CXT Cordless Coffee Maker (DCM501Z). No paper filters are needed, just your favorite ground coffee or single-serve pack, water, and a Makita 18V Lithium-Ion battery. It will brew up to three 5 ounce cups of coffee on a single charge of an 18V LXT 5.0Ah battery. It is also compatible with both Makita 12V max CXT® and 18V LXT® Lithium-Ion batteries.

  •
    Quick View

    Makita 14″ Chain Saw, 18V X2 LXT

    Landscapers and contractors are demanding more cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT® (36V) Brushless Chain Saw. With zero emissions, lower noise, and considerably less maintenance, the XCU03Z is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT® batteries (sold separately) for 36V power and run time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw.

  •
    Quick View

    Makita 14″ Chain Saw Kit, LXT 18V X2 (36V)

    Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT® (36V) Brushless Chain Saw Kit (model XCU03PT). With zero emissions, lower noise, and considerably less maintenance, the XCU03PT is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT® batteries for 36V power and run time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw.

    The XCU03PT has a 14” guide bar and the Makita-built motor with variable speed delivers 0-3,940 FPM for increased cutting speed, but with less noise (only 100dB(A)). It has zero emissions and reduced maintenance: there’s no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there’s no need to drain the fuel for storage. Simply pick it up, load two 18V LXT® Lithium-Ion batteries, and the saw is ready to use. Convenience features include a “tool-less” chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.

    It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

    For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

  •
    Quick View

    Makita 12″ Chain Saw + Angle Grinder Kit, 18V X2 LXT

    The 18V X2 LXT® Chain Saw is powered by two 18V LXT® batteries, so you get maximum performance and run time for gas-powered demands, without leaving the 18V LXT® platform. Model XCU02PTX1 is a kit and includes two fast-charging 18V LXT 5.0Ah batteries and an 18V Dual Port Charger that will charge two batteries simultaneously for increased productivity and less downtime. The kit also includes an 18V LXT® Brushless 4-1/2″ Angle Grinder, which is equipped with an efficient brushless motor and Automatic Speed Change™ technology for corded grinding performance without the cord.

  •
    Quick View

    Makita L.E.D. Lantern Style Flashlight, 18V LXT

    The 18V LXT® Lithium-Ion Cordless L.E.D. Lantern/Flashlight is a versatile work light providing ultra-bright illumination and convenience. There are three L.E.D. lighting modes: 360-degree lantern, 180 degree lantern, and flashlight mode. These versatile settings allow the user to select between lighting a wider area or a specific task or work surface. The fast-charging 18V LXT® Lithium-Ion 5.0Ah battery delivers 11 hours of continuous illumination on a single charge in the 360-degree lantern mode, up to 23 hours in the 180-degree lantern mode, and up to 36 hours in flashlight mode. It is fully compatible with Makita 18V Lithium-Ion batteries.

  •
    Quick View

    Makita Cordless Inflator, 18V LXT

    Inflate car tires, bike tires, or sports balls quickly with the 18V LXT® Cordless Inflator. The Makita-built motor delivers up to 120 PSI. The tool features a high visibility pressure gauge display with backlight, LED light, and an auto-stop function when the desired pressure is reached. A 25-1/2” hose length provides better reach. The compact design allows for easy portability and convenient storage.

  •
    Quick View

    Makita 4-1/2″ Cordless Angle Grinder Kit, 18V LXT

    Makita delivers corded grinding performance without the cord with the 18V LXT® Lithium-Ion Brushless 4-1/2″ / 5” Cut-Off/Angle Grinder Kit. It’s powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. For the most demanding applications, Makita’s exclusive Automatic Speed Change™ Technology automatically adjusts speed and torque during operation for optimal performance. The XAG04T is ideal for grinding, cutting and sanding a wide range of materials including tile, concrete, pipe, conduit, and more.