Product Tag - Threaded rod

  • ALL THREAD, THREADED ROD

    Threaded rod has continuous threading, either on both ends or it may extend along the complete length of the rod. It has no head or fashioned tip. Threaded rod can be used as an anchor bolt, clamp, hanger or U-bolt.
    Threaded rod is available in carbon steel, as Plain, Zinc Plated and HDG, as well as Stainless Steel and the B7/A193 alloy.

  • MAKITA 3/4″ HOLLOW SOCKETS

    The Makita Hollow Sockets are designed to accelerate overhead fastening work by reducing time-spent hand threading fasteners over threaded rod. The hollow shafts allow long bolts and threaded rod to pass through in fastening applications while the increased socket lengths provide better access to nuts located in high places in ceiling or ductwork. The 1/4” hex shank is press-fit for durability and drops readily into an impact driver or driver-drill for convenient, automated fastening.

  • MAKITA 9/16″ HOLLOW SOCKETS

    The Makita Hollow Sockets are designed to accelerate overhead fastening work by reducing time-spent hand threading fasteners over threaded rod. The hollow shafts allow long bolts and threaded rod to pass through in fastening applications while the increased socket lengths provide better access to nuts located in high places in ceiling or ductwork. The 1/4” hex shank is press-fit for durability and drops readily into an impact driver or driver-drill for convenient, automated fastening.

  • SAMMYS THREADED ROD HANGER FOR ENCLOSED STEEL, VERTICAL

    The SAMMYS X-Press threaded rod hanger is designed to install vertically into the bottom of enclosed steel structures, where access to the back of the installed fastener is not possible, providing a secure anchor for 3/8″ threaded rod.  The fastener itself uses an expansion sleeve style anchor, for a proven secure hold.
    The SAMMYS X-Press anchor can be installed quickly and easily with the SAMMYS-Press IT Tool, saving time and installation cost.

  • SAMMYS THREADED ROD HANGER FOR WOOD, HORIZONTAL

    The SAMMYS Sidewinder threaded rod hanger is designed to install horizontally into a wood surface, providing a secure anchor for 3/8″ threaded rod.  The screw itself is from the ITW-Buildex line of wood anchors, for a proven secure hold.
    SAMMYS Sidewinder anchors are designed to be installed with the Red Installation Tool, to ensure proper torque and prevent over-tightening.

  • SAMMYS THREADED ROD HANGER FOR STEEL, HORIZONTAL

    The SAMMYS Sidewinder threaded rod hanger is designed to install horizontally into a steel upright, providing a secure anchor for 3/8″ threaded rod.  The screw itself is from the TEKS line of steel self-drilling anchors, for a proven secure hold.
    SAMMYS Sidewinder anchors are designed to be installed with the Red Installation Tool, to ensure proper torque and prevent over-tightening.

  • SAMMYS THREADED ROD HANGER FOR CONCRETE, HORIZONTAL

    The SAMMYS Sidewinder threaded rod hanger is designed to install horizontally into a concrete upright, providing a secure anchor for 3/8″ threaded rod.  The screw itself is from the Tapcon line of concrete anchors, for a proven secure hold.
    SAMMYS Sidewinder anchors are designed to be installed with the Red Installation Tool, to ensure proper torque and prevent over-tightening.

  • SAMMYS THREADED ROD HANGER TOGGLE, VERTICAL

    The SAMMYS SST30 threaded rod hanger is designed to install vertically into solid ceilings or hollow structures, providing a secure anchor for 3/8″ threaded rod.  The toggle wing piece can be installed through a 5/8″ hole drilled through lath & plaster, hollow concrete, or steel.
    SAMMYS anchors are designed to be installed with either the Black or Red Installation Tool, to ensure proper torque and prevent over-tightening.

  • SAMMYS THREADED ROD HANGER FOR WOOD, VERTICAL

    The SAMMYS threaded rod hanger is designed to install vertically into the bottom of wood structures, providing a secure anchor for either 1/4″ or 3/8″  threaded rod.  The screw itself is from the ITWBuildex line of wood screws, for a proven secure hold with no pre-drilling required.
    SAMMYS anchors are designed to be installed with the Black Installation Tool, to ensure proper torque and prevent over-tightening.

  • SAMMYS THREADED ROD HANGER FOR STEEL, VERTICAL

    The SAMMYS threaded rod hanger is designed to install vertically into the bottom of steel structures, providing a secure anchor for either 1/4″, 3/8″, or 1/2″ threaded rod.  The screw itself is from the TEKS line of steel screws, for a proven secure hold.
    The DSTR516 selection includes a retaining nut for use in thin metals such as purlins or other sheet metal applications.
    SAMMYS anchors are designed to be installed with either the Black or Red Installation Tool, to ensure proper torque and prevent over-tightening.

  • SAMMYS THREADED ROD HANGER FOR CONCRETE, VERTICAL

    The SAMMYS threaded rod hanger is designed to install vertically into the bottom of concrete structures, providing a secure anchor for either 1/4″, 3/8″, or 1/2″ threaded rod.  The screw itself is from the Tapcon line of concrete anchors, for a proven secure hold.<br>SAMMYS anchors are designed to be installed with either the Black or Red Installation Tool, to ensure proper torque and prevent over-tightening.

  • RAMSET THREADED ROD HANGER, GAS ACTUATED

    The Ramset Threaded Rod Hanger is used for suspended ceilings, piping and other items using 1/4″ or 3/8″ threaded rod. A 3/4″ or 1″ length fastener is pre-assembled to a 16 gage threaded rod hanger, and is designed for use in Ramset T3SS Single-Shot Gas Tool.