SpecSeal Mortar 6 Gallon Pail
SpecSeal SSM Firestop Mortar is a light-weight, cost conscious solution for oversized openings in concrete walls and floors. Once mixed with water, SpecSeal Mortar forms a light weight, low density slurry that easily applies into concrete walls and floors. SpecSeal Mortar cures quickly and will not spall or crack due to freezing or changes in temperature.
This passive (non-intumescent) material utilizes a combination of heat sinking and insulating properties to provide an extremely high level of fire resistance.
- Description
- Properties
- Data Sheets & Downloads
SpecSeal® Firestop Mortar mixes with water to form a non-shrinking, high yield mortar that may be applied by pouring, pumping, or troweling. Its low density and light weight means that less forming as well as less forming support is required. Its low density also makes re-penetration for retrofitting a simple task. It is designed to dry quickly and will not crack or spall due to freezing or changes in temperature. Its adhesion is due to a chemical bond thus most installations require little or no mechanical anchoring.
SpecSeal® Firestop Mortar is used to seal through-penetrations as well as construction gaps and blank openings. This product is also used in conjunction with other SpecSeal® Firestop Products such as Collars and Wrap Strips.
- Light weight - less forming and support required
- Fast drying - forms come down faster
- Low density - easy retrofit
- Economical - highest yield per pound means lower installed cost
- Wide range of application - includes aluminum cable tray
- Red color for easy identification and inspection
- Chemical adhesion reduces the need for expensive and time consuming concrete fasteners
- Versatile performer for a wide range of complex applications
- Paintable when dry
Related Products
-
Quick ViewBIO Firestop Pillow 3″ X 9″ X 6″
Intumescent Firestop Pillows are designed for use primarily in large openings with cables, cable trays, blank openings or multiple penetrating items. In the event of a fire, BIO™ Firestop Pillows will prevent the spread of flames and hot gases through the openings. Since no cure time is required, BIO™ Firestop Pillows are ready to install. BIO™ Firestop Pillows are reusable since they can be removed and reinstalled if necessary.
-
Quick View3M™ Fire Barrier Moldable Putty Pads
Our 3M™ Fire Barrier Moldable Putty Pads MPP+ are a one-part firestop material used in various fire-rated assemblies, such as electrical box protection. Designed to prevent the spread of fire, smoke and noxious gasses, this intumescent material comes ready to use in convenient 1/10” (2.54 mm) thick pads that are conformable by hand with no mixing or tools. Pads are firestop tested up to 4 hours.
Recommended Applications- Protection of membrane penetrations for listed metallic and non-metallic electrical boxes
- Wall opening protective to meet building requirements
- Seal gaps between cables in multiple penetrations (including fiber optic inner duct)
- Insulated pipe, electrical conduit and metal pipe penetrations
-
Read MoreQuick View
SpecSeal SSB Firestop Pillows
SpecSeal SSB Firestop Pillows consist of a mineral fiber core material sealed with a water-resistant intumescent membrane. This coated core material is then heat-sealed in a tough, nonirritating, fireretardant poly bag. They easily compress and conform around any penetrant. Equally suited for new or existing conditions, SpecSeal Pillows make short work of even the most complex through-penetration firestop conditions.
-
Quick View
SPEC SEAL EZD44 EZ-PATH FIRE RATED PATHWAY
The EZ Path® Series 44 Fire Rated Pathway is a maintenance-free pathway device designed to allow medium cable bundles to penetrate fire-rated walls without the need for firestopping. This device features a built-in fire sealing system that automatically adjusts to the amount of cables installed. Once installed in a fire barrier, cables can be easily added or removed at any time without the need to remove or reinstall firestopping materials.
-
Read MoreQuick View
SpecSeal Putty Tube or Pad
SSP Putty & Putty Pads
SpecSeal SSP Firestop Putty excels at sealing cabling penetrations and outlet boxes. SSP Putty is non-hardening and easily hand works around grouped cabling penetrations forming a re-enterable seal allowing for future work. When applied with outlet boxes, SSP Putty easily works into voids and seams forming a continuous seal against fire and the products of combustion. -
Quick View
3M CP25WB+ Elastomeric Sealant
Tough and ready-to-use, 3M™ Fire Barrier Sealant CP 25WB+ is a high-performance intumescent sealant that dries to form a monolithic firestop seal. This sealant also acts as a barrier to airborne sound transmission. This sealant is designed to help control the spread of fire, smoke and noxious gases before, during and after exposure to a fire.
Recommended Applications: HVAC ducts and vents; Metallic and non-metallic pipes; Blank openings; Single and bundled cables; Insulated pipe; Pipe and cable through-penetrations; Busways; Combos; Rated wall, floor and floor-ceiling assemblies; Static construction joints. -
Quick View
SpecSeal AS205 Elastomer Spray, 5 Gal
SpecSeal® AS200 Elastomeric Spray is designed primarily for the protection of construction joints, curtain wall safing gaps, and certain through-penetrations.
This fire protective joint coating is a water-based, non-halogenated elastomeric coating that contains no solvents, inorganic fibers, nor asbestos. The coating dries to form a flexible, moisture resistant film that can adhere to all common construction surfaces. It provides for up to 50 percent movement. SpecSeal® AS200 is thixotropic and is capable of being applied by airless spray, brush or trowel. -
Read MoreQuick View
SpecSeal Cast In Place Device
Eliminate core-drilling and firestop after the concrete pour with SpecSeal CID Cast-In Firestop Devices. SpecSeal Cast-In Devices are a sleeve, concrete form and firestop rolled into a single device. SpecSeal Cast-In Devices are available in a range of sizes and heights to accommodate penetrant up to 6″ Trade Size penetrants and concrete depths of up to 36″.
-
Quick View
Fire Safing 4″ X 24″ X 48″ , 4 Panels
Mineral Wool Fire Safing is designed to provide enhanced fire protection in perimeter fire containment systems, floor and wall penetrations, construction joints, and other firestopping applications. It is non-combustible, moisture-resistant, non-corrosive, non-deteriorating, mildew-resistant and vermin-resistant. Mineral Wool FireStop Safing is primarily used as a backing material for firestop caulks and sealants.
-
Quick View
Firestop Closet Toilet Flange Gasket
SpecSeal Closet Flange Firestop Gaskets are one-piece, molded rubber, intumescent pads that install beneath a 3″ (76 mm) or 4″ (102 mm) closet flange to effectively firestop the opening. The die cut rubber gasket is perforated to delineate removable inserts sized to accommodate various outer diameters of toilet flanges.
