SpecSeal Restraint Collar, Pre-Cut or 25 Ft Roll
Metal strip for making restraint collar for SSW Intumescent strips
Cut to length, wrap around pipe with SSW strips in place
Forms collar to contain Blue or Red Strips
Roll is 25 Feet long
- Additional information
- Description
- Properties
- Data Sheets & Downloads
Additional information
| Size | 2″ X 25′ For SSW Blue, 1.5″ X 25′ For SSW Red, 1″ X 25′, Pre-Cut for 1″ Pipe, Pre-cut for 1.5″ Pipe, Pre-cut for 2″ Pipe, Pre-cut for 3″ Pipe, Pre-cut for 4″ Pipe, Pre-cut for 6″ Pipe, Pre-cut for 8″ Pipe, 10″-12″ Collar for Blue/Blu2, 6″-8″ Collar for Blue, 6″-8″ Collar for Red |
|---|
SpecSeal® Wrap Strips are highly flexible, elastomeric strips designed to firestop combustible penetrations in fire-rated floors, floor/ceilings, and walls. Convenient 12 ft (3.7 m) rolls, or individually sized strips facilitate installation and minimize waste.
These metal strips form the collars that hold the intumescent strips in place and contain their expansion to enable them to expand inward, crushing and sealing the pipe or conduit they encircle. Without a strong, properly installed collar, the intumescent strip would simply expand outward and the pipe or conduit would freely allow smoke and fire to pass through.
- Metal strip for making restraint collar for SSW Intumescent strips
- Cut to length, wrap around pipe with SSW strips in place
- Forms collar to contain Blue or Red Strips
- Roll is 25 Feet long
- Pre-cut strips allow faster installation with fewer tools
Related Products
-
Quick ViewFire Safing Insulation Deck Plugs 4.5″ to 3.5″ Taper, X 48″L
Fire Safing Deck Plugs are precision-cut from noncombustible UL classified high-density mineral wool panels. They are precision sized to fit into the fluted profile of metal decks encountered at top-of-wall joints.
-
Quick ViewSpecSeal AS205 Elastomer Spray, 5 Gal
SpecSeal® AS200 Elastomeric Spray is designed primarily for the protection of construction joints, curtain wall safing gaps, and certain through-penetrations.
This fire protective joint coating is a water-based, non-halogenated elastomeric coating that contains no solvents, inorganic fibers, nor asbestos. The coating dries to form a flexible, moisture resistant film that can adhere to all common construction surfaces. It provides for up to 50 percent movement. SpecSeal® AS200 is thixotropic and is capable of being applied by airless spray, brush or trowel. -
Read MoreQuick ViewSpecSeal Collar for Plastic Pipes
SpecSeal SSC Firestop Collars are factory-manufactured firestop devices sized to plastic pipes of up to 6 in. Trade Size. SSC Collars consist of a restraining collar with a factory applied intumescent ensuring the correct amount of material is applied every time. Under fire exposure, SSC Collars quickly expand and collapse combustible piping forming a dense char, resisting the passage of smoke and flame.
-
Read MoreQuick ViewSpecSeal Silicone Joint Sealant
SpecSeal® SIL Silicone Firestop Sealant is a one-part, neutral-curing silicone sealant exhibiting superior performance in applications where sealing openings in walls and floors are needed to control the spread of fire, smoke, toxic gasses, and water during fire conditions.
SpecSeal® SIL Silicone Firestop Sealant is available in non-sag (SIL300) and self-leveling (SIL300SL) grades and may also be used to seal vertical and horizontal joints between metals, masonry, concrete and other common construction materials. SpecSeal® SIL Silicone Firestop Sealant is specially designed for use in static or dynamic joints. SpecSeal® SIL Silicone Firestop Sealant reacts with atmospheric moisture to form a high-strength, durable seal that will adhere to most building substrates without the use of primers. SpecSeal® products do not contain asbestos or PCBs. -
Quick ViewBIO Fireshield Gasket, Double Outlet
BIOSTOP® Firestop Gasket is a single component fire rated gasket for use with electrical boxes when addressing the “24 inch rule”. It is mounted on the inside of the cover plate and installed at the same time as the cover plate, covering the opening and providing the necessary fire protection.
When exposed to heat, BIOSTOP® Firestop Gasket’s highly intumescent nature causes it to expand forming a char that will seal off the opening and prevent the spread of flames and limit the temperature rise on the unexposed surfaces. -
Read MoreQuick ViewSpecSeal Putty Tube or Pad
SSP Putty & Putty Pads
SpecSeal SSP Firestop Putty excels at sealing cabling penetrations and outlet boxes. SSP Putty is non-hardening and easily hand works around grouped cabling penetrations forming a re-enterable seal allowing for future work. When applied with outlet boxes, SSP Putty easily works into voids and seams forming a continuous seal against fire and the products of combustion. -
Read MoreQuick ViewSpecSeal LCI300 Sealant
SpecSeal® LCI Sealant is a versatile and economical intumescent sealant that has excellent caulking properties as well as high build properties on vertical or overhead surfaces. This single component sealant may be caulked (standard cartridge or bulk loaded), knifed or troweled. In addition, SpecSeal® LCI Sealant does not contain PCB’s or asbestos.
SpecSeal® LCI Sealant is storage stable (when stored according to the manufacturer’s recommendations), and will not separate or shrink when dried (when applied according to the manufacturer's recommendations). SpecSeal® LCI Sealant will adhere to all common construction and penetrant materials and contains no solvents that might adversely effect plastic pipes or cable jackets. -
Quick ViewFirestop Closet Toilet Flange Gasket
SpecSeal Closet Flange Firestop Gaskets are one-piece, molded rubber, intumescent pads that install beneath a 3″ (76 mm) or 4″ (102 mm) closet flange to effectively firestop the opening. The die cut rubber gasket is perforated to delineate removable inserts sized to accommodate various outer diameters of toilet flanges.
-
Read MoreQuick ViewSpecSeal LCC Firestop Collar Series
The SpecSeal® LCC Collar is a factory-manufactured device designed to protect plastic pipes penetrating fire-rated walls and floors. Utilizing a heavy gauge galvanized metal collar to house a molded intumescent insert, the SpecSeal® LCC Firestop Collar is specifically sized to fit 1-1/2 in, 2 in, 3 in, and 4 in (38 mm, 51 mm, 76 mm and 102 mm) trade sized pipes. When exposed to temperatures in excess of 320°F (160°C), the SpecSeal® LCC Collar’s molded insert begins to expand (intumesce) rapidly to form a dense, highly insulative char. Its free expansion ranges from 32x to 64x original (pre-expanded) volume. Expansion continues up to 1,000°F (538°C).
-
Quick ViewSTI BIOSTOP® 750, 5 Gallon
BIOSTOP® 750 is a water-based sealant that comes in three different grades (spray mastic, Self-leveling and Caulk grade) and two colors (red and white). Ideal for use in construction joints such as top of the wall, curtain wall perimeter, expansion, control, etc., and for general construction gaps and voids. The mastic spray is designed for spray application and a economical means of installation on long joint runs.
