Shop

  •
    Quick View

    Extension Bit, 12″

    The TruCut 12″ extension bit allows you to make cuts in deep recesses and corners.

  •
    Read More
    Quick View

    Hole Saw Kits

    These hole saw kits contain the most common sizes needed on the jobsite, held in a durable, custom fit, plastic case. They each contain pilot bits, a small arbor with 1/4″ shank, and a large arbor with 7/16″ shank.
    The Electrician’s Kit includes:
    7/8″, 1-1/8″, 1-3/8″, 1-3/4″, 2″, 2-1/2″ hole saws, and small & large arbors with pilot bits.
    The Plumber’s Kit includes:
    3/4″, 7/8″, 1-1/8″, 1-1/2″, 1-3/4″, 2-1/4″ hole saws, and small and large arbors with pilot bits.
    (Case color and design may vary.)

  •
    Read More
    Quick View

    Pilot Drill Bits for Hole Saw Arbors

    As you use your hole saw blades, the pilot bit in the arbor will eventually wear out. Rather than buying a full replacement arbor, you can just buy a new pilot bit and replace the old bit.
    These pilot bits are made from High Speed Steel (HSS), and fit all hole saw arbors. They are available in lengths of 3″ and 4″. There is even a carbide tipped 4″ bit available if you need extra cutting power.

  •
    Read More
    Quick View

    Arbors for Hole Saws, Mag-Bit

    These arbors attach to various sizes of hole saws, and have shanks for hex and SDS drivers. They are made by Mag-Bit, but match industry standard hole saws. Each arbor can attach to multiple sizes of hole saw, with the smallest starting at 9/16″ and going up to 1-3/16″.
    The larger size starts at 1-1/4″, and runs up to the largest at 6″. This size has two posts that fit into matching holes in the back plate of the saw body, so ensure that the saw can’t spin around the arbor as you cut the hole.
    In addition to that choice, an arbor may have a shank that is 1/4″, 3/8″, or 7/16″ hex, or SDS.

  •
    Read More
    Quick View

    Bi-Metal Hole Saws

    Bi-Metal hole saws are constructed using both High Speed Steel (HSS) for its strength, and spring steel for its flexibility. This allows fast cutting in a wide range of materials, with less breakage from tough jobs.
    These hole saws also have a 4/6 variable pitch tooth combination to reduce vibration, and a deep cup for improved chip removal.

  •
    Quick View

    Makita 14″ Saw Chain, Narrow Kerf, 3/8″

    Makita® 14″ Saw Chain is ideal for professional, commercial or occasional users. This versatile Saw Chain is designed for low vibration, ideal for improved comfort when cutting. Twin cutting corners provide improved cutting performance and durability. It is ideal for use with select Makita® 18V LXT® Cordless Chain Saws and Gas-powered Chain Saws.

  •
    Quick View

    Makita Dust Extraction Cup, HEPA Compliant

    There is increasing awareness of dust extraction in concrete applications, so get the right accessory for your Makita cordless rotary hammer. The Dust Extraction Cup is for use with Makita Rotary Hammers, models RH01Z and XRH06Z (sold separately). The Cup attaches quickly and easily for added user convenience, and the clear boot allows the user to clearly see where they are drilling. It is ideal for overhead drilling applications.

  •
    Quick View

    Makita Dust Extraction Kit

    The Makita Dust Extraction Attachment (196537-4) is engineered to reduce the dust created from concrete drilling when used with a jobsite vacuum. The Dust Extraction Attachment fits the Makita 1-9/16″ AVT® Rotary Hammer model HR4013C. 
    The 196537-4 includes both drilling and demolition boots for greater versatility and multiple applications. The Dust Extraction Attachment is part of Makita’s expanding line-up of dust extraction solutions, including the VC4710 Jobsite Vacuum.

  •
    Quick View

    Makita Dust Extraction Shroud, 7″

    The Makita Dust Extracting Surface Grinding Shroud (195368-6) is designed to fit Makita 7 in. grinders. It features a spring-loaded suspension system that keeps the shroud flush to the surface during movement and compensates for blade wear. The shroud has a removable edge piece for surface work flush to edges or other objects. It also has soft brushes that help contain the dust and allow for smooth movement over the work surface. 

  •
    Quick View

    Makita Dust Extraction Shroud, 5″

    The Makita Dust Extracting Surface Grinding Shroud (195236-5) is designed to fit Makita 4-1/2 in. – 5 in. grinders. It features a spring-loaded suspension system that keeps the shroud flush to the surface during movement and compensates for blade wear. The shroud has a removable edge piece for surface work flush to edges or other objects. It also has soft brushes that help contain the dust and allow for smooth movement over the work surface.
    The outside diameter of the extraction port will work with most standard vacuum hose systems. The dust shroud is ideal for concrete finishing, concrete material removal and paint or surface coating removal.

  •
    Quick View

    Makita Dust Extraction Cup

    The Makita Dust Extracting Cup Set attaches to the nose of select Makita rotary hammer for convenient dust extraction. The clear, flexible boot allows the user to easily see where they are drilling. This cup set is ideal for drilling overhead into concrete.

  •
    Quick View

    Makita Hammer Bit Grease, 100ml

    Makita Hammer Bit Grease is designed to keep the shank of the bit lubricated for more efficient results. The advanced composition of the grease means the user needs only to lightly grease the shank. The pump top design makes it easy for the user to apply the exact amount they need to the exact spot without making a mess.