Products Archive - Page 37 of 5 - Thread Source

Read More
Quick View

Makita XGT 40V Leaf Blower, 476 CFM
With zero emissions and lower noise, the 40V max XGT® Brushless Cordless Blower (GBU01) is a welcome solution for professional landscaping clean-up applications. The brushless motor runs cooler and more efficiently for longer life, and delivers speeds up to 143 MPH air velocity. Select turbo boost mode for 564 CFM to move heavy debris.

The blower features a variable speed trigger to adjust speeds between 0-476 CFM. A cruise control lever provides management of power and run time and a speed lock provides continuous operation. The 3-stage telescoping long nozzle allows the user to adjust the nozzle of the blower to cover varying area ranges. The in-line fan design provides better tool balance and improved ergonomics.

XGT is a system of equipment, tools, batteries and chargers utilizing 40V max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

There are 3 feature models of the GBU01 Cordless Blower. The choice is with or without one or two batteries and rapid charger. Options for the Makita GBU01 are:
1. GBU01Z: Tool only
2. GBU01M1: Tool, (1) 40V max XGT® Lithium-Ion 4.0Ah battery, rapid charger
3. GBU01T: Tool, (2) 40V max XGT® Lithium-Ion 5.0Ah batteries, rapid charger
Quick View

Makita Trimmer / Blower Combo Kit, 18V XLT

With zero emissions and lower noise, the 18V LXT® Brushless Cordless 2-Pc. Combo Kit is a welcome solution for clean-up applications. It’s powered by one 18V LXT 4.0Ah Battery, the same battery that powers the full range of solutions in the expanding LXT System.

The combo kit includes a blower (XBU03Z) and trimmer (XRU23Z). This blower delivers speeds up to 116 MPH air velocity and a full 459 CFM of air volume. It features a compact and ergonomic design, variable speed trigger, and cruise control lever provides management of power and run time. The string trimmer delivers up to 6,000 RPM and features a variable speed trigger and rapid-load bump-and-feed trimmer head which loads line in seconds with 3 easy steps.

The outdoor power equipment features Extreme Protection Technology (XPT™). XPT™ is a protective seal inside the tool and is engineered for improved operation in harsh conditions by channeling water and dust from key internal components.
Quick View

Makita 8-PC Combo Kit, 3.0AH, 18V LXT

This MAKXT801X1 combo kit includes 8 Makita® 18V LXT® Cordless Products:
The Compact ½” Driver-Drill (XFD10Z) delivers power and performance that delivers 480 in.lbs. of Max Torque, and 25% more speed than the previous model.
The Impact Driver (XDT11Z) delivers power and speed in a compact size for a full range of driving and fastening tasks.
The 6-1/2” Circular Saw (XSS02Z) with a high-torque motor produces 3,700 RPM for faster cutting.
The Compact Recipro Saw (XRJ01Z) is a versatile cutting solution that combines variable speed and 1/2” stroke length with an exclusive dual-position on/off switch that allows for either paddle or trigger switch operation.
The 5″ Random Orbit Sander (XOB01Z) features three speed settings, superior ergonomics and up to 40 minutes of run time on a single charge. The large 1/8” random orbit action is engineered for efficient sanding, fast material removal, and a swirl-free finish.
The Sub-Compact Brushless 3/8” Square Drive Impact Wrench (XWT12ZB) is ideal for working in tight spaces and for overhead applications. It has variable two-speed with 0-1,300/0-2,400 RPM and 0-2,000/0-3,600 IPM and up to 130 ft.lbs. of Max Torque.
The Blower (DUB182Z) is a go-to clean-up tool and a favorite on job sites and in workshops.
The LED Flashlight (DML815) provides high illumination at 160 lumens.
Rounding out this kit is the DC18RC Rapid Optimum Charger, 2 3.0Ah 18V LXT® batteries, and a tool bag to carry it all.
Quick View

Makita 5″ Wet/Dry Masonry Saw, 18V LXT

The 18V LXT® Brushless 5” Dry/Wet Masonry Saw (XCC01Z) is a powerful cordless wet saw for demanding applications, such as cutting tile, masonry, concrete, and more. The motor delivers 8,800 RPM. With the included 5″ Diamond Blade, it has a high depth of cut capacity of up to 1-9/16” at 90-degrees. The XCC01Z attaches to an optional guide rail with a guide rail adapter (both sold separately), in order to provide straight, accurate cutting.

The saw includes an integrated water delivery system with water flow adjustment, which continuously feeds water for OSHA Table 1 Compliance in masonry cutting applications. For dry cutting, the saw is equipped with Auto-start Wireless System (AWS®), which utilizes Bluetooth® technology for wireless power-on/off communication between the tool and an AWS-equipped dust extractor.
Quick View

Makita 4.0AH Battery + Rapid Charger, 18V LXT

Build your own Makita tool kit with the 18V Lithium-Ion Battery and Rapid Optimum Charger Starter Pack. Makita offers over 250 cordless tools that utilize 18V lithium-ion batteries, most available as “bare tools” (tool only, no batteries or charger included). Pick up the Makita® Battery and Rapid Optimum Charger Starter Pack, then purchase the 18V “bare tools” you need to get the job done. It’s an ideal way to start building a Makita® LXT Cordless System.

Makita® 18V Lithium-Ion Batteries resist self-discharge, so they’re ready for use even after long periods of storage. The Makita® Rapid Optimum Charger is a smart-charging system that communicates with the battery during the charging process to monitor current, voltage and temperature. This advanced charging technology helps optimize battery life and deliver a faster charge. In addition, the Charger has a built-in fan to cool the battery for faster and more efficient charging, even in hot weather conditions.
Read More
Quick View

Reflective Vests

Be safe and be seen by wearing Safety Products General Purpose High Visibility Lime Green Mesh Safety Vest. It features 1 in. of Silver Reflective Tape designed to provide 360 degrees of conspicuity, allowing you to be seen, as well as a easy closure to safely secure the product.

Our Two Tone Class 2 Safety Vest has contrasting trim on stripes. Perfect to wear in daytime conditions. Contrast trim combinations make workers much more noticeable in low light and broad daylight.
Read More
Quick View

Rain Suit, 3 Piece

Made of .35mm PVC on polyester for those tough and rugged jobs. Resistant towards snags and punctures and is extremely durable. Storm flap front, covered pockets, attached hood and a bib style trouser. 3 piece suit available in yellow.
Read More
Quick View

Hard Hat

Low profile design, with a shell that is constructed from High Density Polyethylene materials. Four point ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hat. Soft brow pad is replaceable, universal accessory slots, fits cap mounted ear muffs, accessories and accommodated chin straps. Exceeds ANSI Z89.1, Type 1, Class C, G, and E for industrial head protection; CSA Z94.1-15.
Read More
Quick View

Safety Guard Rail Base

For jobsite construction of temporary guard rails/hand rails.

Also for temporary guard rails on stairways.

Safety Guard Rail Bases are available in both heavy duty steel or durable plastic models.
Reusable.
Durable.
Meets & Exceeds OSHA Requirements.
Read More
Quick View

Safety Glasses

Economical lightweight glass offers superior protection.
Optically correct and distortion free lenses.
Standard and Sport styles, available in Clear and Smoke lenses.
Offering protection against high speed particles at extremes of temperature, -5C ~55C degree
UV 400 lenses provide maximum protection from harmful UV-A and UV-B rays
Meets or exceeds ANZI Z87.1 2015 standard CE EN166 certificated
Offers highest available impact protection, which meets or exceeds ballistic fragmentation impact standards per MIL PRF-32432, Clause 3.6.3
Read More
Quick View

JustRite Safety Cans, Plastic

Constructed of high-density polyethylene to stand up to tough acids and corrosives, as well as heat, cans are dent, puncture, and chip resistant. The self-closing cap, pressure-relief mechanism and flame arrester work together to prevent ignition sources from entering, without restricting liquid flow in or out of the can. All cans feature stainless steel hardware and flame arrester for superior chemical resistance. FM approved.

Carbon Insert – A patented conductive current-carrying carbon insert is embedded into the rib of containers, completing a ground path between the cover assembly and the flame arrester. When used with a grounding strip, this provides proper grounding and prevents the creation of a static arc during filling or pouring.
Read More
Quick View

JustRite Safety Cans, Metal

JustRite brand of fully compliant metal safety cans feature a high performance, chemical resistant stainless steel flame arrester that stops flashback ignition, provides faster liquid flow and offers exceptional durability and corrosion protection for long life. This extra long precision mesh screen is a full 3-1/2″ to ensure safe insertion of gas nozzle with metal to metal contact eliminating the potential of a spark and possible explosion. Self closing lid controls vapors and spills and unique counterbalanced, ergonomic design makes it easy to use. 100% leak tested. 10-year warranty. Meets OSHA and NFPA, FM, UL/ULC listed.

Available in Red for gasoline, Yellow for diesel fuel, and Blue for other liquids. Replacement funnel is also available.