Shop

  •
    Read More
    Quick View

    Wing Nuts

    Wing nuts are a type of specialty nut with a pair of wings to enable it to tighten without tools. The wings provide a grip for the thumb and finger for turning. They are commonly used where frequent adjustments or removals are needed, and can be made quickly at a later stage.
    An alternative form of the wing nut has a washer built in, and is used to storm-proof the windows of a building. This washer face allows the wing nut to be used to secure plywood onto fixed anchors, where the hole in the plywood will be larger than the anchor studs it and the wing nut are being mounted on. This provides the advantage of having a larger surface bearing the pressure, while also eliminating the need of a separate washer that will often fall and get lost during storm-prep installation.

  •
    Read More
    Quick View

    Anchor Bolts, L-Bolts
  • Read More
    Quick View

    Square Plate Washer

    Square plate washers are made from low carbon steel and have a larger surface area than round washers. Since they develop more friction when tightened against wood, they are often found in timber construction.
    Often, square plate washers are used to attach treated lumber sill plates to concrete foundations. Another common use is using square plate washers to attach wood beams to the walls of a garage, and them mount the garage door rails and equipment.

  •
    Read More
    Quick View

    Pro-Tect System for Pool Enclosures

    PRO-TECT Fastener Protection System consists of a nylon sleeve and a cap that, together, cover and protect the anchor screw. The PRO-TECT nylon sleeve gives protection from electrolysis, providing worry-free installation while extending the life of the product. This is very important for the harsh conditions of the coastal environments and extreme temperatures.
    The PRO-TECT cap snaps onto the top of the nylon sleeve, covering the head of the Blue-Tap anchor screw. Due to its special design, the cap will not come off easily. Caps are available in White and Bronze.
    By repelling water and preventing penetration, PRO-TECT reduces or eliminates the need for warranty work, increasing life expectancy of the structures.

  •
    Quick View

    PanelMate Quick Kit

    This kit contains all of the hardware you need to get started making your home hurricane-resistant. There are 40 PanelMate anchors, along with the bit and driver to properly set them. There are also 40 washers and wing nuts to secure the storm panels to the anchors.

  •
    Read More
    Quick View

    Makita 15″ String Trimmer, 18V X2 LXT

    Landscapers are demanding more cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line-up of cordless OPE, including the 36V (18V X2) LXT® Brushless String Trimmer Kit (model XRU15). With zero emissions, lower noise and considerably less maintenance than gas-powered string trimmers, the 36V (18V X2) LXT® String Trimmer is a welcome solution for landscapers. It’s powered by two fast-charging 18V LXT Batteries for maximum power and run time, but without leaving the strongly-preferred 18V battery platform.

    Electronic controls efficiently use battery energy to match the changing demands of the application for increased power and speed when needed. In addition, the XRU15 string trimmer rotates in the same counter-clockwise direction as professional-grade trimmers, and uses industry standard spindles (M10x1.25 LH) for added convenience.

    There are 2 feature models of the XRU15 string trimmer. The choice is with or without four batteries and dual port rapid charger. Options for the Makita XRU15 are:

    1. XRU15Z: Tool only
    2. XRU15PT1: Tool, (4) 18V LXT® Lithium-Ion 5.0Ah batteries, and dual port rapid charger
  •
    Quick View

    Aluminum Key Hole Washer

    Aluminum key-hole washers are commonly used with combo truss machine screws and sidewalk bolts. They are used as an additional backing plate when storm panels keyways do not line up correctly. They are also often used to provide additional backing when sidewalk bolts have been changed out to truss head screws. They can be placed on after panels are installed.

  •
    Read More
    Quick View

    Hanger Bolts

    Hanger bolts are a special type of stud that have a lag screw thread on one end and a machine screw thread on the other. They are ideal for tie-wire or overhead applications such as hanging ductwork, fixtures, or suspended electrical wiring from wood beams or walls.

    Our hanger bolts are available as either a plain finish, or zinc plating for corrosion resistance.

  •
    Read More
    Quick View

    Square Nuts, Zinc

    As the name implies, square nuts have a 4-sided, square design. This square profile provides a greater bearing surface when installing onto a bolt. Square nuts are designed for use with square headed bolts, and the large surface provides better resistance to loosening. When using square nuts, as with hex nuts, use flat washers of the correct size and material.

  •
    Read More
    Quick View

    T-Nuts

    T-nuts are barrel shaped fasteners with internal threading, and are used to provide an anchor point for a bolt in a piece of wood, whether a flat board or a dimensional piece. They are especially useful when a flush surface is wanted. T-nuts have a flat base with prongs bent up at 90° angles, parallel to the barrel. After pre-drilling a hole, the t-nut can be fixed in place either by tightening a bolt into it from the top, which pulls the prongs into the wood, or using hammer to pound the locking prongs into the wood until flush.

  •
    Read More
    Quick View

    Makita 1″ SDS+ Rotary Hammer, HEPA Capable, 18V LXT

    The 18V LXT® Lithium-Ion Brushless 1” SDS+ Rotary Hammer (XRH01) is a cordless concrete drilling solution powered by an efficient Makita BL™ Brushless Motor for up to 50% longer run time, increased power and speed, and longer tool life. The XRH01 delivers 0-950 RPM, 4,700 BPM, and 1.7 ft.lbs of impact energy.

    Ease-of-use and efficiency features include 3-mode operation (rotation only, hammering with rotation and hammer only), a large 2-finger trigger for more convenience and greater comfort, multiple chisel positions, and a depth adjustment guide for increased drilling depth accuracy.

    This Makita tool is available as either a stand alone tool, or as a kit with two batteries, rapid charger, and tool bag.

    The XRH01 rotary hammer may also use a HEPA Dust Extractor Attachment. The HEPA Dust Extractor Attachment is trigger-activated for user convenience. The rubber suction gasket is engineered to provide consistent contact with the work surface, where the dust is channeled to the clear dust container with HEPA filter, which captures 99.97% of dust particles (size .3 microns).

    There are 3 feature models of the Makita XRH01 rotary hammer. The choice is tool only, or tool with two batteries and charger, or with two batteries, charger, and HEPA dust extractor. All models come with standard accessories of side handle and depth guage. Options for the Makita XRH01 are:

    1. XRH01Z: Tool, with accessories only
    2. XRH01T: Tool, (2) 18V LXT® Lithium-Ion 5.0Ah batteries, rapid charger, tool case, and accessories
    3. XRH011TWX: Tool, (2) 18V LXT® Lithium-Ion 5.0Ah batteries,  rapid charger, tool bag, and accessories
  •
    Read More
    Quick View

    F-Track Bolts

    The square head of these F-Track Bolts fits perfectly into all flat and angled storm panel F-Track.