SpecSeal LCC Firestop Collar Series
The SpecSeal® LCC Collar is a factory-manufactured device designed to protect plastic pipes penetrating fire-rated walls and floors. Utilizing a heavy gauge galvanized metal collar to house a molded intumescent insert, the SpecSeal® LCC Firestop Collar is specifically sized to fit 1-1/2 in, 2 in, 3 in, and 4 in (38 mm, 51 mm, 76 mm and 102 mm) trade sized pipes. When exposed to temperatures in excess of 320°F (160°C), the SpecSeal® LCC Collar’s molded insert begins to expand (intumesce) rapidly to form a dense, highly insulative char. Its free expansion ranges from 32x to 64x original (pre-expanded) volume. Expansion continues up to 1,000°F (538°C).
- Additional information
- Description
- Properties
- Data Sheets & Downloads
Additional information
| Size | 1.5″, 2″, 3″, 4″ |
|---|
SpecSeal® LCC Collars are used to protect a variety of plastic pipes including PVC, PVC Foam Core (ccPVC), CPVC, RNC, PP, FRPP, FRP, HDPE, PE, PVDF, ABS and ABS Foam Core (ccABS) in both vented (DWV) and closed (electrical conduit and water supply) installations. SpecSeal® LCC Collars are suitable for use in all common constructions including concrete floors, concrete over steel deck, concrete walls, concrete block walls, gypsum board walls, as well as wood floor assemblies.
- Sized for 1-1/2 in., 2 in., 3 in., and 4 in. trade size combustible pipes
- Installs quickly and eliminates waste
- Tested in a variety of construction types
Related Products
-
Quick ViewSTI BIOSTOP 1-1/2″ Fire Rated Pipe Collar
Pipe Collars are prefabricated for open and closed through-penetration firestop systems using 1 1/2″(38 mm) to 6″ (152 mm) plastic pipe. An easy locking tab assures easy installation. The collar design greatly reduces the time and expense that is required to install competitive collars.
-
Quick ViewBIO Fireshield Gasket, Double Outlet
BIOSTOP® Firestop Gasket is a single component fire rated gasket for use with electrical boxes when addressing the “24 inch rule”. It is mounted on the inside of the cover plate and installed at the same time as the cover plate, covering the opening and providing the necessary fire protection.
When exposed to heat, BIOSTOP® Firestop Gasket’s highly intumescent nature causes it to expand forming a char that will seal off the opening and prevent the spread of flames and limit the temperature rise on the unexposed surfaces. -
Read MoreQuick View
SpecSeal Cast In Place Device
Eliminate core-drilling and firestop after the concrete pour with SpecSeal CID Cast-In Firestop Devices. SpecSeal Cast-In Devices are a sleeve, concrete form and firestop rolled into a single device. SpecSeal Cast-In Devices are available in a range of sizes and heights to accommodate penetrant up to 6″ Trade Size penetrants and concrete depths of up to 36″.
-
Quick View
Touch ‘n Seal, 24 Oz.
A fast and easy, high-yield means to seal cracks and gaps. Patented all-direction dispensing easily maneuvers tight spots. Reusable dispensing means you can restart the can later.
-
Quick View
BIO Firestop Pillow 3″ X 9″ X 6″
Intumescent Firestop Pillows are designed for use primarily in large openings with cables, cable trays, blank openings or multiple penetrating items. In the event of a fire, BIO™ Firestop Pillows will prevent the spread of flames and hot gases through the openings. Since no cure time is required, BIO™ Firestop Pillows are ready to install. BIO™ Firestop Pillows are reusable since they can be removed and reinstalled if necessary.
-
Read MoreQuick View
SpecSeal Silicone Joint Sealant
SpecSeal® SIL Silicone Firestop Sealant is a one-part, neutral-curing silicone sealant exhibiting superior performance in applications where sealing openings in walls and floors are needed to control the spread of fire, smoke, toxic gasses, and water during fire conditions.
SpecSeal® SIL Silicone Firestop Sealant is available in non-sag (SIL300) and self-leveling (SIL300SL) grades and may also be used to seal vertical and horizontal joints between metals, masonry, concrete and other common construction materials. SpecSeal® SIL Silicone Firestop Sealant is specially designed for use in static or dynamic joints. SpecSeal® SIL Silicone Firestop Sealant reacts with atmospheric moisture to form a high-strength, durable seal that will adhere to most building substrates without the use of primers. SpecSeal® products do not contain asbestos or PCBs. -
Quick View
3M IC 15WB Intumescent Sealant
Designed to prevent the spread of fire, smoke and noxious gas, 3M™ Fire Barrier Sealant IC 15WB+ is a one-part, gun-grade, latex-based, intumescent firestop sealant. This firestop sealant provides up to 3-hour fire protection in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115. In addition, this product is fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079). This sealant has been formulated to form a monolithic firestop seal that also helps minimize sound transfer, acting as a barrier to airborne sound transmission (STC-Rating of 54 when tested in a STC 54-rated wall assembly)
Recommended Applications: HVAC ducts and vents; Metallic and non-metallic pipes, including CPVC pipes; Blank openings; Single and bundled cables; Insulated pipe; Pipe and cable through-penetrations; Busways; Combos; Rated wall, floor and floor-ceiling assemblies; Static construction joints. -
Quick View
3M CP25WB+ Elastomeric Sealant
Tough and ready-to-use, 3M™ Fire Barrier Sealant CP 25WB+ is a high-performance intumescent sealant that dries to form a monolithic firestop seal. This sealant also acts as a barrier to airborne sound transmission. This sealant is designed to help control the spread of fire, smoke and noxious gases before, during and after exposure to a fire.
Recommended Applications: HVAC ducts and vents; Metallic and non-metallic pipes; Blank openings; Single and bundled cables; Insulated pipe; Pipe and cable through-penetrations; Busways; Combos; Rated wall, floor and floor-ceiling assemblies; Static construction joints. -
Read MoreQuick View
SpecSeal SSW Wrap Strip, Pre-Cut or 12 Ft Roll
-
Read MoreQuick View
SpecSeal Putty Tube or Pad
SSP Putty & Putty Pads
SpecSeal SSP Firestop Putty excels at sealing cabling penetrations and outlet boxes. SSP Putty is non-hardening and easily hand works around grouped cabling penetrations forming a re-enterable seal allowing for future work. When applied with outlet boxes, SSP Putty easily works into voids and seams forming a continuous seal against fire and the products of combustion.
