Heavy Duty Cobalt Drill Bits
Our Cobalt High Speed drill bits are made of high speed Cobalt Steel. The Cobalt content adds high abrasion resistance to the already hard working properties if our bits. Heavy web construction and 135 degree Split-Point add to the long life of these bits. Available in sizes 1/32″ – 1/2″.
- Description
- Selection Chart
Description
- High Speed Steel
- Ground Flute
- Heavy Duty Cobalt
- 135 degree Split Point
- Made in the USA
- NAS 907 Type B
Related Products
-
Read MoreQuick ViewDouble End Drill Bits
With these double end drill bits, you can work twice as long without needing to carry a second bit. No worrying about losing it before it’s needed. As the first end gets worn out, simply remove the bit from the drill, turn it around, and insert the worn end in the chuck. Then get right back to work.
-
Read MoreQuick ViewEuroboor IBC Pilot Pins
Genuine Euroboor pilot pins imported directly from the manufacturer in The Netherlands. These pilot pins are manufactured for use with short short or long Euroboor hole cutters from 1/2″ to 1″ in diameter.
-
Read MoreQuick View
Aircraft Drill Bits
These Aircraft length drill bits are formed from high-speed steel, with a 135° split point tip, and black oxide finish.
Select sizes are available in lengths up to 72″, for the extreme jobs. -
Read MoreQuick View
Paddle Bits, Individual
Paddle bits, also called spade bits, have a wide, flat blade. They are commonly used by tradesmen such as electricians and plumbers for drilling holes through studs in walls for running wiring or pipes (auger bits and hole saws are also used for this), but they also have a place in the woodshop for drilling on fine woodworking projects.
An extension kit is available for the extreme jobs. It includes a 12″ extension shaft, and a bent-hex tool to securely tighten the retaining screws when the paddle bit is installed. (See image.) -
Read MoreQuick View
Countersink Drill Bits
Countersinking screws is a often used method for ensuring a flush surface, without bumps of screwheads getting in the way. These cross-hole countersinks are specially designed so that the trailing edge of the hole makes the cut, and they excel at ejecting chips as they drill. Made of strong steel, they ensure years of precision work.
-
Read MoreQuick View
Jobber Drill Bit Sets
Jobber drill bits are well-named, because they do the job as expected.
The basic set contains bits made from High-Speed Steel (HSS) with a black oxide finish. The distinctive Black&Gold set has a special finish to help prevent rust.
The Mechanics Stubby set features a reduced length, which means it is less prone to breakage, even under hard use. The Cobalt drill bits are specially made to drill through hard metals, including stainless steel. -
Read MoreQuick View
Euroboor HCS 1″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 1″ with a drill depth of 1″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 1″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 1″ from penetrating the second layer of material.
-
Quick View
“Silver & Deming” Drill Bits
One particular type of reduced-shank drill bits are Silver & Deming (S&D) bits, whose sets run from 33/64″ to 1″ drill body diameter with a standard 1/2″ reduced shank for all. This allows drill presses with 1/2″ chucks to run the larger drills. S&D bits are 6″ in length with a 3″ drilling depth.
-
Quick View
Bit Holder
Made from S2 modified shock resistant steel for professional performance and durability. Patented spiral torsion zone absorbs impact and extends bit life. Made with a high strength industrial magnet for securing your bits. -
Read MoreQuick View
Countersink Bits Set, 4 or 9 Pc
Countersinking screws is a often used method for ensuring a flush surface, without bumps of screwheads getting in the way. These cross-hole countersinks are specially designed so that the trailing edge of the hole makes the cut, and they excel at ejecting chips as they drill. Made of strong steel, they ensure years of precision work.
Available in a 9 piece or 4 piece set.
Made from S2 modified shock resistant steel for professional performance and durability. Patented spiral torsion zone absorbs impact and extends bit life. Made with a high strength industrial magnet for securing your bits.
