Flap Disk, High Density Zirconia, Type 27
CGW Flap discs blend and finish in one operation which replaces the traditional two-step grinding process of T27 grinding wheels and sanding discs. Flap discs provide a more consistent finish. CGW flap discs reduce processing time which increases productivity for lower parts finishing costs and provides an overall cost savings. CGW flap discs are engineered for full use of the coated abrasive material. Layering the abrasive cloth flaps allows the discs to wear evenly which constantly exposes new sharp grain.
The High Density Zirconia Flap Disk is for use on stainless steel, sheet metal, tool steels, heat-treated steels, and for the grinding & finishing of welds. For aggressive use on heavy duty applications.
CGW’S new ceramic flap disc is the best choice for grinding stainless steel, titanium, Inconel, and other hard metals. Using CGW’s ceramic flap disc will give a “cool grinding surface” since the grain has a self sharpening formula.
- Additional information
- Description
- Specifications
- Data Sheets & Downloads
Additional information
| Size, Arbor, and Type | 4-1/2″ X 7/8 X 36X HIGH DENSITY ZIRCONIA, 5″ X 7/8 X 40X HIGH DENSITY ZIRCONIA, 5″ X 7/8 X 40X HIGH DENSITY CERAMIC |
|---|
The High Density Zirconia Flap Disk is for use on stainless steel, sheet metal, tool steels, heat-treated steels, and for the grinding & finishing of welds. For aggressive use on heavy duty applications.
CGW'S new ceramic flap disc is the best choice for grinding stainless steel, titanium, Inconel, and other hard metals. Using CGW’s ceramic flap disc will give a "cool grinding surface" since the grain has a self sharpening formula.
Zirconia:
Abrasive Type Coated
Flap Disc Type Type 27
Disc Diameter (Inch) 4-1/2
Abrasive Material Zirconia Alumina
Grade Very Coarse
Grit 36
Attaching System Arbor
Center Hole Size 7/8
Backing Material Poly Cotton
Maximum RPM 13300
Series Z3
Ceramic:
Abrasive Type Coated
Disc Diameter (Inch) 5
Abrasive Material Ceramic
Grade Coarse
Grit 40
Attaching System Arbor
Center Hole Size 7/8
Backing Material Polyester
Maximum RPM 12200
Safety Data Sheet (SDS), Vitrified Bond Abrasives
Safety Data Sheet (SDS), Resin Bonded Abrasives
Safety Data Sheet (SDS), Flap Disc Abrasives
Related Products
-
Read MoreQuick ViewWire Cup Brushes, Crimped or Knotted
These wire cup brushes are designed for fast, heavy duty working on large surfaces. The crimped wire cup brush is great for light and medium duty cleaning, such as removing scale and paint, deburring, and cleaning welds or flat surfaces.
The knotted wire cup brush allows a long working life and high removal capacity while working at high speed. -
Quick ViewBit Holder
Made from S2 modified shock resistant steel for professional performance and durability. Patented spiral torsion zone absorbs impact and extends bit life. Made with a high strength industrial magnet for securing your bits. -
Quick View
Spade Drill Bits
Spade bits are used for rough boring in wood. Spade bits are flat, with a centering point and two cutters. The cutters are often equipped with spurs in an attempt to ensure a cleaner hole. Intended for high speed use, they are used with electric hand drills. Spade bits are also sometimes referred to as “paddle bits”. Available in 1/4″ – 1-1/2″.
-
Quick View
Aircraft Drill Bits
Aircraft drill bits are long drill bits originally designed for use in the aircraft industry where they often need to drill holes reaching through deep cavities, and then through thin materials. You will find them invaluable for drilling holes in tight spaces, and drilling holes through long or wide pieces of wood.
-
Quick View
Ship Auger Drill Bits
Durable hardened cutting edge for long life in tough materials, including nail-embedded wood. Fully-forged bit for maximum durability. Wide flutes for maximum chip removal and less binding. Aggressive screw-pitch for faster drilling. 5/16″ – 1-1/2″ in 6″ and 18″ length.
-
Quick View
“Silver & Deming” Drill Bits
One particular type of reduced-shank drill bits are Silver & Deming (S&D) bits, whose sets run from 33/64″ to 1″ drill body diameter with a standard 1/2″ reduced shank for all. This allows drill presses with 1/2″ chucks to run the larger drills. S&D bits are 6″ in length with a 3″ drilling depth.
-
Quick View
HSS Black Oxide Drill Bits
The HSS Black Oxide bits are made in the USA with a 118 degree point and are available from 1/32″ to 11/16″.e”]
-
Read MoreQuick View
Grinding Wheels, Type 27
Grinding wheels are used for dressing the surface of material, from hard and soft metals, to stone and concrete, to plastics. The various product designs and abrasive types allow a great range of uses.
-
Quick View
Mandrel Adapter, 1/4″ X 1/4″
The CGW 1/4″ x 1/4″ mandrel adapter is made for small diameter cut-off wheels with 1/4″ arbors. These mandrels can be used on electric or battery operated drills or on high speed air tools such as a die grinder.
-
HotQuick View
ThunderTwist SDS Drill Bits
The ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions.
Made from S2 modified shock resistant steel for professional performance and durability. Patented spiral torsion zone absorbs impact and extends bit life. Made with a high strength industrial magnet for securing your bits.
The ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions.