Mag-Bit 624 Hole Saws
Cuts holes in wood, plastic, or any machinable metal, including nail-embedded wood, plywood, pipe, stainless steel etc. 9/16″ – 6″ – 624 HOLE SAWS – BI-METAL VARI-PITCH 4/6 TPI, 1-3/4″ DEPTH
When drilling metals, use a cutting compound such as MAG-LUBE concentrated cutting fluid.
- Description
- Selection Chart
Description
- Bi-Metal.
- 1-3/4” Depth cuts through 2”x 4” in one easy pass.
- 4/6 Variable Pitch Tooth combination, reduces vibration… Increases productivity.
- Deep Gullet design, for improved chip removal.
- Tough 3/16” Thick Back Plate.Faster cutting… More Holes per Saw.
- 9/16″ – 6″
Related Products
-
Quick View“Silver & Deming” Drill Bits
One particular type of reduced-shank drill bits are Silver & Deming (S&D) bits, whose sets run from 33/64″ to 1″ drill body diameter with a standard 1/2″ reduced shank for all. This allows drill presses with 1/2″ chucks to run the larger drills. S&D bits are 6″ in length with a 3″ drilling depth.
-
Quick View
TCT X165 Heavy Duty Blade
Diamond X165: Heavy duty special diamond blade only to be used for cutting cast iron and ductile pipes.
-
HotQuick View
ThunderTwist SDS Drill Bits
The ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions. -
Read MoreQuick View
Euroboor HCL 2″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 2″ with a drill depth of 2″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 2″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 2″ from penetrating the second layer of material.
-
Quick View
Mag-Bit 2 Oz. Cutting Fluid, Concentrated
For use with many Mag-Bit cutting bits and blades.
Highly concentrated. Recommended Dilution of 20:1 for all tasks.
2 oz bottle makes 1.56 gallons of cutting fluid.
Excellent rust control on all metals; No in-process rust or rework.
Low foaming, low misting, water soluble.
Non-nitrited, non-halogenated, non-silicones or silicate, non-phenolic.
Rated insignificant under NFPA hazard rating for both fire and health. -
Quick View
Duo-Bit Standard Masonry Drill Bits
The Duo-Bit Masonry Bits feature a high speed steel shank and carbide tips for durability. From drilling concrete to powering through brickwork, these masonry drill bits are excellent for a variety of heavy duty applications! 1/8″ – 1″ in 3″ and 6″ length
-
Read MoreQuick View
Arbors for Hole Saws, Mag-Bit
These arbors attach to various sizes of hole saws, and have shanks for hex and SDS drivers. They are made by Mag-Bit, but match industry standard hole saws. Each arbor can attach to multiple sizes of hole saw, with the smallest starting at 9/16″ and going up to 1-3/16″.
The larger size starts at 1-1/4″, and runs up to the largest at 6″. This size has two posts that fit into matching holes in the back plate of the saw body, so ensure that the saw can’t spin around the arbor as you cut the hole.
In addition to that choice, an arbor may have a shank that is 1/4″, 3/8″, or 7/16″ hex, or SDS. -
Read MoreQuick View
Euroboor HCS 1″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 1″ with a drill depth of 1″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 1″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 1″ from penetrating the second layer of material.
-
Read MoreQuick View
Self-Feed Hole Saw
Designed for high speed cutting of large holes for pipe or conduit placement. Multiple outlining spurs quickly bore precise holes without shipping or splintering. Ideal for plumbers, electricians, carpenters, or anyone who needs to drill large holes in wood.
-
Quick View
Extension Bit, 12″
The TruCut 12″ extension bit allows you to make cuts in deep recesses and corners.
The ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions.
