Cut Off Wheels, Large Diameter
As the name implies, cut off wheels are designed to cut through solid materials such as metal, stainless steel, concrete, stone, or a combination of such material. Similar in structure to a thicker grinding wheel, cut off wheels are thin and are used edge-on to cut through the material.
- Additional information
- Description
- Abrasive Materials and Applications
- Data Sheets & Downloads
Additional information
| Size, Arbor, & Abrasive | 12″ X 1/8″ – 7/8″ – A24R, 12″ X 5/32″ – 1″ – A24R, 12″ X 5/32″ – 20mm – A24R, 14″ X 5/32″ – 1″ – A24R, 14″ X 5/32″ – 20mm – A24T, 14″ X 3/32″ – 1″ – A36P, 14″ X 3/32″ – 1″ – ZA24S, 16″ X 5/32″ – 1″ – A36P |
|---|
As the name implies, cut off wheels are designed to cut through solid materials such as metal, stainless steel, concrete, stone, or a combination of such material. Similar in structure to a thicker grinding wheel, cut off wheels are thin and are used edge-on to cut through the material.
A24R: Aluminum Oxide – Metal & Steel, Stainless.
General purpose. 14" are available in both double and triple reinforced.
A24T: Aluminum Oxide – Metal Decking & Cable.
Harder bond for more cuts on thinner metals. 14" are triple reinforced.
A36P: Aluminum Oxide – Metal & Steel
A36S: Aluminum Oxide – For stainless steel and steel.
A46N-ALU: Aluminum Oxide mixture.
Contains a non-loading bond. Good on Aluminum.
A60S: Aluminum Oxide – Metal Decking & Cable.
Extra-thin wheels for faster cutting with less resistance.
C24: Silicon Carbide – Stone/Concrete
ZA24S: Zirconia Aluminum Oxide – Metal & Stainless;
High performance cutting, recommended on thicker
stock applications such as angle iron, angle bars.
ZA60R: Zirconia Aluminum Oxide – Metal, steel and stainless.
Longer lasting life and easy cutting action.
ZA60S: Higher percentage of special Premium treated Alox
grain and premium fiberglass net for Maximum safety.
ZA60T: Higher percentage of special Premium treated Alox
grain and premium fiberglass net for Maximum safety.
Safety Data Sheet (SDS), Vitrified Bond Abrasives
Safety Data Sheet (SDS), Resin Bonded Abrasives
Safety Data Sheet (SDS), Flap Disc Abrasives
Related Products
-
Exact Cermet Carbide Blade, 6-1/2″
The Exact pipe cutting system improves pipe cutting beyond comparison. Not only do Exact pipe cutters complete the work in a fraction of the time taken by alternative methods, but the quality of the finished cut is so clean and straight that normally no extra shaping or reworking is required. The pipe cutters are light and easily carried, enabling the work to be performed wherever it is needed.
Cermet 165: Blade with ceramic tips alloy for heavy duty applications, especially for cutting stainless and acid proof steel. Cermet blades can be sharpened a couple of times so they will become like new.6-1/2 CERMET CARBIDE BLADE FOR 360E STEEL-STAINLESS-COPPER-PLASTIC 900
-
Makita Couple Shaft 10″ Chain Saw Attachment
Makita is giving landscapers more options with both MM4® 4-Stroke Engine and 18V X2 LXT® (36V) cordless couple-shaft power heads, and the Pole Saw Couple Shaft Attachment is the right accessory for nslucent bar oil tank with adjustable automatic chain lubrication, with a steel drive shaft engineered for lower vibration and longer service life. It quickly attaches to the Makita power head for easy operation.
-
Makita 6-1/2″ Plunge Circular Saw, Corded
The Makita 6-1/2” Plunge Cut Circular Saw (model SP6000J) delivers precise and more accurate cutting when combined with an optional guide rail system constructed with anodized aluminum for smooth, straight cuts. The saw and rail system work together to produce accurate cuts with minimal tear-out. The saw combines a powerful 12 AMP motor and a large cutting capacity with magnesium components for less weight and electronic speed control to maintain constant speed under load for smooth cutting and a splinter-free mirror finish. The SP6000J is a more portable option to a table saw for select applications, and it is ideal for use on the jobsite or in a workshop.
Precision Settings and Features for Quality Cuts
The saw has a bevel capability of -1° to 48° with positive stops at 22.5° and 45°. The saw delivers precise cutting, as the position of the blade enters the material on the same cutting line whether cutting straight or bevel. In addition, the saw has close-to-wall cutting (11/16-inch) for expanded cutting applications. The built-in depth stop allows a preliminary cut of 1/16-inch to be performed before the entire material is cut through for clean and splinter-free cutting -
Cut Off Wheel, Stationary, Double Reinforced
This cut off wheel is made with heavy duty fiberglass reinforcement, for high-speed machines, and demanding cutting tasks. It meets or exceeds all safety standards for all machines on the market.
-
Makita 20″ 56cc Farm / Ranch Chainsaw
The Makita 20” 56cc Chain Saw combines a high power-to-weight ratio with easier starts and lower vibration for a full range of applications. The 56cc engine delivers 4.0 HP and an engine speed of 13,800 RPM, with an Easy Start spring-assisted starter. Heavy-duty cartridge filter system increases durability while reducing frequency of maintenance. Additional features include an easy-to-clean chain compartment for efficient clearing of chips, even when rip cutting, and the advanced vibration dampening system is engineered to reduce vibration. The EA5600FRGG is engineered for a range of cutting and trimming applications, and is ideal for farm and ranch work environments.
-
Exact Cermet Carbide Blade, 5-1/2″
The Exact pipe cutting system improves pipe cutting beyond comparison. Not only do Exact pipe cutters complete the work in a fraction of the time taken by alternative methods, but the quality of the finished cut is so clean and straight that normally no extra shaping or reworking is required. The pipe cutters are light and easily carried, enabling the work to be performed wherever it is needed.
Cermet 140: Blade with ceramic alloy tips for heavy duty applications, especially for cutting stainless and acid proof steel. Cermet blades can be sharpened a couple of times so they will become like new.5-1/2″CERMET CARBIDE BLADE FOR STEEL-STAINLESS-COPPER-PLASTICS900
-
Mag-Bit 2 Oz. Cutting Fluid, Concentrated
For use with many Mag-Bit cutting bits and blades.
Highly concentrated. Recommended Dilution of 20:1 for all tasks.
2 oz bottle makes 1.56 gallons of cutting fluid.
Excellent rust control on all metals; No in-process rust or rework.
Low foaming, low misting, water soluble.
Non-nitrited, non-halogenated, non-silicones or silicate, non-phenolic.
Rated insignificant under NFPA hazard rating for both fire and health. -
Makita Oscillating Multi-Tool, 18V LXT
Trades of all kinds are turning to oscillating multi-tools for a range of applications, and the Makita 18V LXT® Lithium-Ion Cordless Multi-Tool (XMT03Z) delivers corded speed and power without the cord. The XMT03Z is engineered with additional features like reduced vibration and lower noise for improved performance, and is ideal for cutting, sanding, scraping, grout removal, and more.
The XMT03Z has a small diameter barrel grip for improved handling, a large on/off slide switch with lock-on button, and adapters to fit most competitive accessories from Dremel®, Fein, Craftsman, Ridgid, or Ryobi.
The XMT03Z is engineered for a range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class cordless multi-tool.
-
Makita 16 Gauge Nibbler, 18V LXT
The 18V LXT® Lithium-Ion Cordless 16 Gauge Nibbler (XNJ01) provides contractors with another 18V LXT® metal cutting solution. The XNJ01Z is engineered for cutting corrugate metal roof decking, sheet metal, and stainless steel, and it will do the job without the cord. It is ideal for metal roofing and decking contractors, HVAC, and metal fab shop work.
The XNJ01Z is powered by a Makita-built motor that delivers 1,900 strokes-per-minute (SPM) for fast and smooth cutting. The die holder rotates 360° to meet the demands of the cutting direction, with a cutting radius of 1-3/4” (inner edge) and 2” (outer edge). When cutting, the metal chips are conveniently disposed below the cutting material, which helps prevent damage to the work surface. -

Read MoreQuick ViewPilot Drill Bits for Hole Saw Arbors
As you use your hole saw blades, the pilot bit in the arbor will eventually wear out. Rather than buying a full replacement arbor, you can just buy a new pilot bit and replace the old bit.
These pilot bits are made from High Speed Steel (HSS), and fit all hole saw arbors. They are available in lengths of 3″ and 4″. There is even a carbide tipped 4″ bit available if you need extra cutting power.













