Makita 16 Gauge Nibbler, 18V LXT
The 18V LXT® Lithium-Ion Cordless 16 Gauge Nibbler (XNJ01) provides contractors with another 18V LXT® metal cutting solution. The XNJ01Z is engineered for cutting corrugate metal roof decking, sheet metal, and stainless steel, and it will do the job without the cord. It is ideal for metal roofing and decking contractors, HVAC, and metal fab shop work.
The XNJ01Z is powered by a Makita-built motor that delivers 1,900 strokes-per-minute (SPM) for fast and smooth cutting. The die holder rotates 360° to meet the demands of the cutting direction, with a cutting radius of 1-3/4” (inner edge) and 2” (outer edge). When cutting, the metal chips are conveniently disposed below the cutting material, which helps prevent damage to the work surface.
- Description
- Features
The 18V LXT® Lithium-Ion Cordless 16 Gauge Nibbler (XNJ01) provides contractors with another 18V LXT® metal cutting solution. The XNJ01Z is engineered for cutting corrugate metal roof decking, sheet metal, and stainless steel, and it will do the job without the cord. It is ideal for metal roofing and decking contractors, HVAC, and metal fab shop work.
The XNJ01Z is powered by a Makita-built motor that delivers 1,900 strokes-per-minute (SPM) for fast and smooth cutting. The die holder rotates 360° to meet the demands of the cutting direction, with a cutting radius of 1-3/4” (inner edge) and 2” (outer edge). When cutting, the metal chips are conveniently disposed below the cutting material, which helps prevent damage to the work surface.
PERFORMANCE : Makita-built motor delivers 1,900 SPM
CAPACITY : Ideal for cutting roofing sheet metal at thicknesses up to 16 gauge
VERSATILITY : Die holder rotates 360° to meet demands of cutting direction
CONVENIENCE : Convenient chip disposal is below cutting material to minimize damage to cutting surface
INCLUDES : Tool only
- Makita-built motor delivers 1,900 SPM for faster and smooth cutting
- Ideal for cutting roofing sheet metal at thicknesses up to 16 gauge
- Die holder rotates 360° to meet demands of cutting direction
- Convenient chip disposal is below cutting material to minimize damage to cutting surface
- Cutting radius: inner edge 1-3/4”; outer edge 2”
- Anti-restart protection prevents motor start up when battery is inserted with switch locked on
- Rubberized soft grip for improved comfort
- Lock-on sliding switch for continuous operation
- Built-in thickness gauge for convenience
- Externally accessible carbon brushes for greater serviceability
- Easy punch and die replacement for reduced down time on the job
- 3-year limited warranty
Related Products
-
Quick ViewMakita 2-1/2″ Coil Siding Nailer
The Makita 2-1/2″ Siding Coil Nailer combines rugged construction with ease-of-use features for improved performance. The AN611 accepts 1-1/4” to 2-1/2” nails (.080 – .099 shank diameter) with a 300-400 magazine capacity and an easy-loading canister with nail size adjustment. The AN611 has a 3-mode selector switch (contact, sequential, lock) that is engineered for increased user control and convenience. Additional features include a “tool-less” depth adjustment with 9 depth settings, and sharp spurs that grip the wood for increased control at an angle.
-
Quick ViewMakita 5″ Random Orbit Sander, 12,000 OPM
Makita’s 5-Inch Random Orbit Sander delivers fast, smooth performance with better grip and control. The BO5030 is ideal for woodworkers and finish carpenters who require a best-in-class random orbit sander. It features a pad control system for controlled pad speed upon start up, with a powerful 3 AMP motor for continuous operation, 1/8-inch random orbit action, and 12,000 OPM for fast and smooth sanding. The BO5030 is precision engineered with all ball bearing construction for longer tool life.
-
Quick View
Makita 3/8″ Angle Drill w/Cord Paddle Switch
With a 10-5/8 in. long body and 2-5/8 in. head width, the Makita 3/8 in. Angle Drill (model DA3010F) provides a compact solution when working between framing studs and other close quarter applications. The paddle switch with variable speed provides increased user convenience, and the torque-limiting clutch is engineered to disengage the gears if the bit binds. The LED light illuminates the work surface for improved visibility.
-
Quick View
Makita Subcompact Impact /Hammer Drill Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX202RB is a combo kit with two 18V Sub-Compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless hammer driver-drill with two speed settings that weighs only 2.8 lbs. The percussive hammer-drill setting allows for drilling into masonry and brick. The variable speed brushless impact driver has two speed settings and weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit includes two 18V LXT® Compact 2.0Ah batteries,which feature an integrated L.E.D. battery charge level indicator.
-
Quick View
Makita 2.6 Gallon Pressurized Water Tank
The Makita 2.6 Gallon Pressuriezed Water Tank is designed to be used with gas power saws, while making cuts in masonry materials with a wet-use diamond blade. Each tank is made of durable, lightweight poly-carbonate for added durability and a long life. The large 2.6 gallon capacity means less frequent refills and reduced downtime.
-
Quick View
Makita 10.1 Oz Cartridge Holder
This 360° rotatable cartridge holder fits 10 oz. and 300 ml cartridges, and includes all you need to utilize 10oz. cartridge style containers. It is made of lightweight, high quality material.
-
Quick View
Makita 1/2″ Angle Drill w/Cord
Tackle hard-to-reach plumbing work with the Makita 1/2 in. Right Angle Drill (model DA4031). The drill can handle steel up to 1/2 in. thick and wood up to 4-5/8 in. at difficult angles with its Sidewinder handle that rotates 90 degrees left or right. The powerful 10 Amp motor offers precise variable speed control across 2 ranges, 0 – 1,200 RPM and 0 – 300 RPM. Additional features include an adjustable top handle and an ergonomic rubberized grip.
-
Quick View
Makita 7-1/4″ Circular Saw
Makita engineered the 7-1/4” Circular Saw (model 5007F) with pro framers in mind, combining power and performance with ease-of-use features, superior balance, and job site durability. The 5007F is ideal for a range of framing and cutting applications.
The 5007F is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, masons, carpenters, and general contractors seeking a best-in-class 7-1/4” circular saw. -
Quick View
Makita 14″ Chain Saw Kit, LXT 18V X2 (36V)
-
Quick View
Makita 5″ Random Orbit Sander, Variable Speed
Makita’s 5-Inch Random Orbit Sander with variable speed combines power, speed and performance with improved grip and control, including an innovative adjustable front handle. The large 1/8-inch random orbit action delivers fast and smooth sanding and a swirl-free finish, with a pad control system for controlled pad speed upon start-up. The rubberized palm grip and top handle fit like a glove with even pressure and easy control. It is ideal for woodworkers, finish carpenters and general contractors.
