Cut Off Wheels, Large Diameter
As the name implies, cut off wheels are designed to cut through solid materials such as metal, stainless steel, concrete, stone, or a combination of such material. Similar in structure to a thicker grinding wheel, cut off wheels are thin and are used edge-on to cut through the material.
- Additional information
- Description
- Abrasive Materials and Applications
- Data Sheets & Downloads
Additional information
| Size, Arbor, & Abrasive | 12″ X 1/8″ – 7/8″ – A24R, 12″ X 5/32″ – 1″ – A24R, 12″ X 5/32″ – 20mm – A24R, 14″ X 5/32″ – 1″ – A24R, 14″ X 5/32″ – 20mm – A24T, 14″ X 3/32″ – 1″ – A36P, 14″ X 3/32″ – 1″ – ZA24S, 16″ X 5/32″ – 1″ – A36P |
|---|
As the name implies, cut off wheels are designed to cut through solid materials such as metal, stainless steel, concrete, stone, or a combination of such material. Similar in structure to a thicker grinding wheel, cut off wheels are thin and are used edge-on to cut through the material.
A24R: Aluminum Oxide – Metal & Steel, Stainless.
General purpose. 14" are available in both double and triple reinforced.
A24T: Aluminum Oxide – Metal Decking & Cable.
Harder bond for more cuts on thinner metals. 14" are triple reinforced.
A36P: Aluminum Oxide – Metal & Steel
A36S: Aluminum Oxide – For stainless steel and steel.
A46N-ALU: Aluminum Oxide mixture.
Contains a non-loading bond. Good on Aluminum.
A60S: Aluminum Oxide – Metal Decking & Cable.
Extra-thin wheels for faster cutting with less resistance.
C24: Silicon Carbide – Stone/Concrete
ZA24S: Zirconia Aluminum Oxide – Metal & Stainless;
High performance cutting, recommended on thicker
stock applications such as angle iron, angle bars.
ZA60R: Zirconia Aluminum Oxide – Metal, steel and stainless.
Longer lasting life and easy cutting action.
ZA60S: Higher percentage of special Premium treated Alox
grain and premium fiberglass net for Maximum safety.
ZA60T: Higher percentage of special Premium treated Alox
grain and premium fiberglass net for Maximum safety.
Safety Data Sheet (SDS), Vitrified Bond Abrasives
Safety Data Sheet (SDS), Resin Bonded Abrasives
Safety Data Sheet (SDS), Flap Disc Abrasives
Related Products
-
Read MoreQuick ViewHole Saw Kits
These hole saw kits contain the most common sizes needed on the jobsite, held in a durable, custom fit, plastic case. They each contain pilot bits, a small arbor with 1/4″ shank, and a large arbor with 7/16″ shank.
The Electrician’s Kit includes:
7/8″, 1-1/8″, 1-3/8″, 1-3/4″, 2″, 2-1/2″ hole saws, and small & large arbors with pilot bits.
The Plumber’s Kit includes:
3/4″, 7/8″, 1-1/8″, 1-1/2″, 1-3/4″, 2-1/4″ hole saws, and small and large arbors with pilot bits.
(Case color and design may vary.) -
Read MoreQuick ViewMakita Bandsaw Blades, 44-7/8″
Makita’s Portable Band Saw Blade features bi-metal construction that lasts longer than carbon blades for added user convenience and value. They make clean, quick cuts in a wide variety of applications including cutting all thread, rebar, pipe and channel. For use cutting a wide variety of materials including mild steel, aluminum and stainless steel.
-
Quick View
Makita 20″ 56cc Farm / Ranch Chainsaw
The Makita 20” 56cc Chain Saw combines a high power-to-weight ratio with easier starts and lower vibration for a full range of applications. The 56cc engine delivers 4.0 HP and an engine speed of 13,800 RPM, with an Easy Start spring-assisted starter. Heavy-duty cartridge filter system increases durability while reducing frequency of maintenance. Additional features include an easy-to-clean chain compartment for efficient clearing of chips, even when rip cutting, and the advanced vibration dampening system is engineered to reduce vibration. The EA5600FRGG is engineered for a range of cutting and trimming applications, and is ideal for farm and ranch work environments.
-
Read MoreQuick View
Makita Demolition Sawzall Blades
Makita Demolisher™ reciprocating saw blades are engineered for the most demanding of demolition applications. The fully reinforced teeth and cobalt content minimize teeth breakage and increases durability. Added blade thickness increases its resistance to bending.
-
Quick View
Exact TCT Tungsten Carbide Blade
The Exact pipe cutting system improves pipe cutting beyond comparison. Not only do Exact pipe cutters complete the work in a fraction of the time taken by alternative methods, but the quality of the finished cut is so clean and straight that normally no extra shaping or reworking is required. The pipe cutters are light and easily carried, enabling the work to be performed wherever it is needed.
TCT 165: Blade with tungsten carbide tips for general use. Suitable for cutting steel, copper, aluminum and plastics. TCT blades can be sharpened a couple of times so they will become like new.6-1/2″ TCT CARBIDE BLADE FOR 360E STEEL-COPPER-PLASTICS
-
Read MoreQuick View
Pilot Drill Bits for Hole Saw Arbors
As you use your hole saw blades, the pilot bit in the arbor will eventually wear out. Rather than buying a full replacement arbor, you can just buy a new pilot bit and replace the old bit.
These pilot bits are made from High Speed Steel (HSS), and fit all hole saw arbors. They are available in lengths of 3″ and 4″. There is even a carbide tipped 4″ bit available if you need extra cutting power. -
Quick View
Makita 12″ Dual Bevel Sliding Compound Miter Saw
The Makita 12” Dual-Bevel Sliding Compound Miter Saw with Laser (model LS1219L) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (6-3/4”) and crown molding (8” nested). It will also make 15” crosscuts at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0° to 48° (left and right).
-
Quick View
Makita Oscillating Multi-Tool, 18V LXT
Trades of all kinds are turning to oscillating multi-tools for a range of applications, and the Makita 18V LXT® Lithium-Ion Cordless Multi-Tool (XMT03Z) delivers corded speed and power without the cord. The XMT03Z is engineered with additional features like reduced vibration and lower noise for improved performance, and is ideal for cutting, sanding, scraping, grout removal, and more.
The XMT03Z has a small diameter barrel grip for improved handling, a large on/off slide switch with lock-on button, and adapters to fit most competitive accessories from Dremel®, Fein, Craftsman, Ridgid, or Ryobi.
The XMT03Z is engineered for a range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class cordless multi-tool.
-
Read MoreQuick View
Makita 2-Speed Recipro Saw, 18V LXT
Makita, a pioneer in brushless motor technology and battery innovation, combines both in the 18V LXT® Lithium-Ion Brushless Recipro Saw (XRJ05). It has an electronically-controlled BL™ Brushless motor that matches torque and RPM to the application. The XRJ05 is equipped with efficiency features for faster cutting. The long 1-1/4” stroke length increases cutting efficiency, and the refined crank mechanism design minimizes blade deflection and reduces vibration. Convenience features include an L.E.D. light to illuminate the line of cut, a retractable tool hook, and “tool-less” blade change for faster blade installation and removal.
There are 2 feature models of the XRJ05 Recipro Saw. The choice is with or without two batteries and rapid charger. Options for the Makita XRJ05 are:
- XRJ05Z: Tool only
- XRJ05T: Tool, (2) 18V LXT® Lithium-Ion 5.0Ah batteries, rapid charger, and tool case
-
Quick View
Makita 1/4″, 3/8″ Threaded Rod Cutter, 18V LXT
Makita has delivered a cordless cutting solution for steel rod cutting with the 18V LXT® Brushless Cordless Threaded Rod Cutter. It will make up to 1,300 cuts of 3/8” coarse thread threaded rod and 1,200 cuts of 3/8” coarse thread stainless steel threaded rod with a 5.0Ah battery. The compact design makes the XCS03Z ideal for overhead cutting of installed threaded rod. Provides spark-free cuts that are clean and burr-free allowing easy hand-threading of fastener or nut.
