Product Tag - Woodworking

  •
    Read More
    Quick View

    Hanger Bolts

    Hanger bolts are a special type of stud that have a lag screw thread on one end and a machine screw thread on the other. They are ideal for tie-wire or overhead applications such as hanging ductwork, fixtures, or suspended electrical wiring from wood beams or walls.

    Our hanger bolts are available as either a plain finish, or zinc plating for corrosion resistance.

  •
    Read More
    Quick View

    Dekfast Roof Screws, 10″ to 18″

    Dekfast XHD High Strength Fasteners are ideal for insulation attachment to wood and light gauge steel. The SD#1 point cuts through gravel, BUR and metal up to 18ga. Black Sentri SP long=life coating provides extended corrosion protection. The #3PH pan head is compatible with all Dekfast insulation stress and membrane seam plates.
    Longer sizes are available by special request.
    FM and Dade County Approved.

  •
    Read More
    Quick View

    Makita XGT 40V Quiet Series Air Compressor, 2 Gallon

    Compressors are workhorse tools on the job site and in the workshop. Makita® Air Compressors are favorites for their faster recovery time, lower noise, longer tool life, and consistent performance. The AC001G 40V max XGT® Brushless 2 Gallon Quiet Series Compressor can drive up to 700 finish nails using a fully charged 40V XGT® 4.0Ah battery. The AC001G will drive up to 1,400 finish nails using a fully charged 40V XGT® 8.0Ah battery.

    Quiet Series Compressors are engineered to emit low noise levels with the AC001 emitting only 68 dB, which makes it ideal for indoor use. It is also the lightest weight cordless compressor in its class at up to 10 lbs. lighter than competitor models, while refilling up to 20% faster.

    There are 2 feature models of the AC001G Cordless Compressor. The choice is with or without one battery and rapid charger. Options for the Makita AC001G are:
    AC001GZ: Tool only
    AC001GM1: Tool, (1) 40V max XGT® Lithium-Ion 4.0Ah battery, and rapid charger

  •
    Quick View

    Makita High-Speed Dust Blower, 18V LXT

    The 18V LXT® Brushless Cordless High Speed Blower/Inflator (XSA01) is a handheld solution with a convenient in-line design for focused dust and debris removal. The Makita-built brushless motor delivers up to 447 MPH and 39 CFM with four digitally controlled speeds for a wide range of applications. The High Speed Dust Blower delivers up to 50 minutes of continuous run time with a fully-charged 18V LXT® 6.0Ah battery. It includes five nozzles for a range of applications.

  •
    Read More
    Quick View

    Makita XGT 40V Compact Router

    The Makita 40V max XGT® Brushless Compact Router (GTR01) provides a cordless solution for many woodworking needs. The electronically controlled Makita-built brushless motor delivers up to 1.5 HP and efficiently uses energy to match torque and RPM to the changing demands of the application. It has a variable speed control dial (10,000 – 31,000 RPM) to match the speed of the application, and electronic speed control engineered to maintain constant speed under load.

    XGT® is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT® is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

    There are 2 feature models of the GTR01 Cordless Compact Router. The choice is with or without one battery and rapid charger. Options for the Makita GTR01 are:

    1. GTR01Z: Tool only
    2. GTR01D1: Tool, (1) 40V max XGT® Lithium-Ion 4.0Ah battery, rapid charger, and tool bag
  •
    Quick View

    Makita XGT 40V High-Speed Dust Blower

    The Makita 40V max XGT® Brushless High-Speed Dust Blower (GSA01Z) is a handheld solution with a convenient in-line design for focused dust and debris removal. The Makita-built brushless motor delivers up to 447 MPH and 39 CFM with four speed settings, and up to 50 minutes of continuous run time with a 40V XGT® 2.5Ah battery. It includes five nozzles for a range of applications.

    Convenience features include a rubberized soft grip for comfort and a compact length of only 7-1/8” making it ideal to use in tight spaces. It also features a filter on the blower intake that reduces dust being blown around when in use.

    XGT® is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT® is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

  •
    Quick View

    Makita 11 Gallon HEPA Xtract Vac, Corded

    The 11 Gallon Wet/Dry HEPA Filter Dust Extractor/Vacuum (VC4210L) is a best-in-class solution for dust extraction in concrete and woodworking applications. The VC4210L is powered by a 12 AMP motor that generates 148 CFM of suction power and 92” of water lift to take on the most challenging applications.

    Designed with contractors in mind, the VC4210L combines power with less noise and less weight in a smaller footprint and is ideal for indoor and room-to-room applications.

  •
    Quick View

    Makita 3/8″ Detail Belt Sander, 18V LXT

    The Makita 18V LXT® 3/8” x 21” Detail Belt Sander (XSB01Z) delivers corded performance with cordless convenience. The compact design and 160-degree pivoting arm can reach tight spaces and is easier to store. The XSB01TJ is engineered for detail work in wood and steel applications, including fine carpentry and furniture-making, welding, ornamental metal structures, automotive, and more.

    The large 21” belt produces 4-5/16” maximum sanding length for faster work. There are 3 different sized arm assemblies available; a ¼” and ½” assembly are optional.

  •
    Quick View

    Makita 4.0AH Battery + Rapid Charger, 18V LXT

    Build your own Makita tool kit with the 18V Lithium-Ion Battery and Rapid Optimum Charger Starter Pack. Makita offers over 250 cordless tools that utilize 18V lithium-ion batteries, most available as “bare tools” (tool only, no batteries or charger included). Pick up the Makita® Battery and Rapid Optimum Charger Starter Pack, then purchase the 18V “bare tools” you need to get the job done. It’s an ideal way to start building a Makita® LXT Cordless System.

    Makita® 18V Lithium-Ion Batteries resist self-discharge, so they’re ready for use even after long periods of storage. The Makita® Rapid Optimum Charger is a smart-charging system that communicates with the battery during the charging process to monitor current, voltage and temperature. This advanced charging technology helps optimize battery life and deliver a faster charge. In addition, the Charger has a built-in fan to cool the battery for faster and more efficient charging, even in hot weather conditions.

  •
    Quick View

    Makita Plate Joiner, 18V LXT

    The Makita 18V LXT® Lithium-Ion Cordless Plate Joiner (model XJP03Z) provides portability and performance in the field or in the shop — without the cord. The XJP03Z combines power and precision with ease-of-use features for strong and accurate biscuit joints for furniture making, cabinet construction and fine woodworking applications.

    The XJP03Z provides up to 320 cuts or 160 joints on a single charge. The rack-and-pinion vertical fence system is engineered for accurate fence adjustments, and the cast aluminum pivot fence has three positive stops at 0 degrees, 45 degrees, and 90 degrees. The blade diameter is 4 inches, and there are six depth settings with one-touch stops for the most common biscuit sizes including #0, #10 and #20.

  •
    Quick View

    Makita Cordless 3-1/4″ Planer, 18V LXT

    The Makita 18V LXT® Lithium-Ion Cordless Planer (model XPK01Z) combines the speed and capacity of a corded planer with the convenience of cordless. The result is fast and accurate stock removal, without the cord.

    The XPK01Z delivers 15,000 RPM and is engineered for fast stock removal. It will plane up to 3-1/4” wide and 5/64” deep in a single pass, with a 2-blade cutter head and double-edge carbide blades for added performance and a smooth finish. The click depth adjustment knob has an easy-to-read scale with settings from 0” to 5/64” for precise depth adjustment. In addition, the precision machined aluminum base is engineered for increased planning accuracy.

  •
    Read More
    Quick View

    Tenryu Pro-Series Blades for Wood

    TENRYU’S superior quality line for professional craftsmen
    Pro Series for Wood
    Laser cut, press tempered, individually hammer tensioned, and chrome-plated bodies bring the cutting edge to the workpiece with unparalleled precision. Fine grain carbide tips are given the tooth configuration to do the job right. Pro Series blades are also made to handle non-ferrous metal cutting, plastics, or solid surface materials. These blades are made to satisfy the most demanding craftsmen.