Product Tag - Powder Actuated

  •
    Read More
    Quick View

    Ramset Washer Pin Fastening Systems

    Designed to drive flush into steel and concrete
    Consistent and optimum quality in every pin
    Washer increases bearing surface against material

  •
    Read More
    Quick View

    Ramset Fastening Pins

    The Ramset Fastening System Drive Pins are powder actuated pins used to attach material to concrete or steel. The pins are specifically fabricated for toughness and durability.
    The 1/2″ and 5/8″ pins are knurled for extra grip, and are specifically engineered for use in structural-quality steel.
    The 3/4″ and 1″ pins are perfect for attaching metal track to concrete.
    The 1″ up to 2″ pins are sized for attaching furring strips or plywood to concrete.
    The 2-1/2″ and 3″ pins are designed to attach 2×4’s to concrete.

  •
    Read More
    Quick View

    Threaded Stud

    Threaded studs are available in a variety of thread and shank lengths for use in concrete, some types of concrete block, and A36 or A572 structural steel. They are used for applications where it may be desirable to remove the fixture, where shimming may be required or for suspending sprinkler systems. 
    The threaded studs have a specially designed point to allow proper penetration into the base material. A plastic flute is mounted over the point to retain the drive pin in the fasteners guide of the tool providing guidance during the driving operation. A plastic cap is also provided to protect the threads of the fastener during the driving process as well as providing guidance during installation.

  •
    Read More
    Quick View

    Knurled Track Pin

    The Ramset 3/4 in. Drive Pins are ideal for fastening track in concrete and can be used to penetrate dense concrete and structural-quality steel. The pins are specifically fabricated for toughness and durability.

  •
    Read More
    Quick View

    Anchor Setting Tool Powder Load, 25 Caliber Disc

    Powder actuated tools are the quickest, most efficient way to set fasteners into concrete slabs and block walls. These .25 caliber powder loads provide the force needed to drive those fasteners into place. This level is the medium strength available, for average fasteners and materials.
    Each disc has 10 powder loads, and there are 10 discs per box.
    Caution: Always test-fasten with the lowest power level for your tool. If more power is necessary, use the next highest power level until proper level and fastening is achieved. Refer to operator's manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by federal law. Failure to use properly can result in serious injury or death to users or bystanders.

  •
    Read More
    Quick View

    Anchor Setting Tool Powder Load Strips

    Powder actuated tools are the quickest, most efficient way to set fasteners into concrete slabs and block walls. These color coordinated .25  and .27 caliber powder loads provide the force needed to drive those fasteners into place. They provide from medium power up to the highest power of loads available.
    Each strip has 10 powder loads, and there are 10 strips per box.
    Caution: Always test-fasten with the lowest power level for your tool. If more power is necessary, use the next highest power level until proper level and fastening is achieved. Refer to operator’s manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by federal law. Failure to use properly can result in serious injury or death to users or bystanders.

  •
    Read More
    Quick View

    Anchor Setting Tool Powder Load, .22 Caliber

    Powder actuated tools are the quickest, most efficient way to set fasteners into concrete slabs and block walls. These .22 caliber powder loads provide the force needed to drive those fasteners into place. This level is the lightest available, for smaller fasteners and thinner materials.
    Caution: Always test-fasten with the lowest power level for your tool. If more power is necessary, use the next highest power level until proper level and fastening is achieved. Refer to operator's manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by federal law. Failure to use properly can result in serious injury or death to users or bystanders.

  •
    Quick View

    1″ Conduit Clip w/Pin

    Designed for use with Powder Actuated tools, this EMT clip will secure conduit to concrete, without the need to drill a hole first.

  •
    Quick View

    1-1/4″ Ceiling Clip Assembly

    The Ramset Ceiling Clip  is designed to mount into a slanted ceiling, with hanging wire attached through the eye. Able to support light loads such as suspended ceiling grids.