Product Tag - Makita

  •
    Quick View

    Makita 10″ Dual Bevel Sliding Compound Miter Saw, Laser

    The Makita 10” Dual-Bevel Sliding Compound Miter Saw with Laser (model LS1019L) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. The saw is powered by a 15 AMP direct drive motor with soft start.
    The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (5-1/4”) and crown molding (6-5/8” nested), the largest in its class. It will also crosscut a 4×12 at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0° to 48° (left and right).

  •
    Quick View

    Makita 11 Gallon HEPA Xtract Vac, Corded

    The 11 Gallon Wet/Dry HEPA Filter Dust Extractor/Vacuum (VC4210L) is a best-in-class solution for dust extraction in concrete and woodworking applications. The VC4210L is powered by a 12 AMP motor that generates 148 CFM of suction power and 92” of water lift to take on the most challenging applications.

    Designed with contractors in mind, the VC4210L combines power with less noise and less weight in a smaller footprint and is ideal for indoor and room-to-room applications.

  •
    Quick View

    Makita ½” 4-Speed Impact Wrench w/Detent, 18V LXT

    Makita’s 18V LXT® Brushless 4-Speed ½” Sq. Drive Impact Wrench w/ Detent Anvil (XWT15Z), provides improved fastening control, ideal for automotive, installation, and fabrication trades. The impact wrench combines extended run time and speed control for unmatched fastening performance. It is powered by a Makita-built brushless motor for longer run time, and which delivers 240 ft.lbs. of Max Torque and 430 ft.lbs. of Nut-Busting Torque.

    Precise fastening control is achieved through the 4-speed power selection switch, which accounts for a wide range of applications. Three forward and three reverse rotation auto-stop modes offer increased efficiency when fastener is adequately loosened. The full-speed mode function reduces the trigger pull to reach full speed.

  •
    Quick View

    Makita 1/2″ Ergonomic Right Angle Drill, 18V LXT

    The Makita 18V LXT® Brushless ½” Right Angle Drill (XAD05Z) offers freedom from the cord, with superior cordless drilling speed. The ergonomically designed top handle with rubberized soft grip provides increased comfort on the job. The XAD05Z will take on the most demanding applications like drilling up to 5” holes with hole saws and 2-9/16” holes with self-feed bits.

    The XAD05 has a long list of features for drilling with superior speed and efficiency. These include metal gear housing for durability, an electric brake for maximum productivity, and dual L.E.D. lights to illuminate the work area. The brushless motor and two-speed transmission deliver no-load speeds of 0-450 RPM and 0-1,400 RPM. Users also benefit with long run time: the XAD05 will deliver up to 105 1-1/2″ holes per charge in 2x SPF lumber using one 18V LXT 5.0Ah Battery and a self-feed bit.

     

  •
    Quick View

    Makita 3/8″ Detail Belt Sander, 18V LXT

    The Makita 18V LXT® 3/8” x 21” Detail Belt Sander (XSB01Z) delivers corded performance with cordless convenience. The compact design and 160-degree pivoting arm can reach tight spaces and is easier to store. The XSB01TJ is engineered for detail work in wood and steel applications, including fine carpentry and furniture-making, welding, ornamental metal structures, automotive, and more.

    The large 21” belt produces 4-5/16” maximum sanding length for faster work. There are 3 different sized arm assemblies available; a ¼” and ½” assembly are optional.

  •
    Quick View

    Makita 21 Quart Cooler/Warmer w/USB, 18V LXT

    The Makita CW180 is a cordless cooler & warmer box. For maximum convenience, it can be powered by 3 power source options: 18V LXT Li-Ion battery (two in parallel or one), 12V/24V DC (cigar socket) or standard 120V AC supply.

    5 Cooling Modes (0,15,30,40,50 °F)
    2 Warming Modes (130, 140 °F)

    Run Time 2x 6.0Ah
    5 hours at 0° F (-18 °C )
    17 hours at 40° F (5 °C )
    4 hours at 140° F (60 °C )

  •
    Quick View

    MAKITA 23″ CONTRACTOR TOOL BAG

    Makita Tool Bag is made of durable and lightweight materials. The Bag feature a spacious interior for holding tools and accessories. The bag features both a carrying handle and shoulder strap for added user convenience. Built-in wheels for easy transporting.

  •
    Quick View

    MAKITA 1-1/8″ SDS+ ROTARY HAMMER W/CORD

    The 1-3/16” Rotary Hammer (HR3001CK) is engineered for performance and power. It has a 7.5 AMP motor that delivers 2.6 ft.lbs. of impact energy to handle the most demanding applications.

    The 3-mode operation offers “rotation only”, “hammering with rotation” or “hammering only” for multiple applications. Modes can be easily changed with a recessed hammer-function selector, which is located below the gear housing for improved durability.

    The L-shaped body design brings the operator closer to the application for increased accuracy. A vibration-absorbing back handle and rubberized soft grip provides increased operator comfort.

  •
    Quick View

    Makita Self-Leveling Cross-Line/4-Point Red Beam Laser, 12V CXT LXT

    Lasers are typically utilized in the early stages of construction, and measurement needs will vary based on application requirements. The Makita 12V max CXT® Lithium-Ion Self-Leveling Cross-Line/4-Point Red Beam Laser (SK106DNAX) gives the user a cordless solution for selectable horizontal/vertical cross reference lines plus 4-point required for level, align, plumb, and square applications. Depending on ambient light in the working environment, the SK106DNAX has a line visibility range up to 82′ and is detectable up to 262’ with a Makita Laser Detector.
    For users in the 18V LXT® battery platform, the SK106DNAX has a power connector port that allows an 18V LXT® battery to be used with the Power Source Adapter (ADP05) and Adapter Cord (adapter and cord sold separately).

  •
    Quick View

    Makita Earth Auger Kit, 18V X2 (36V) LXT

    With zero emissions, lower noise, and considerably less maintenance, the 36V (18V X2) LXT® Brushless Cordless Earth Auger Kit (XGD01PT) is a welcome solution for landscapers. The Makita-built brushless motor delivers power equivalent to a 36cc gas earth auger. The XGD01PT can drill holes up to 8” wide and 41” deep. The extension bar, auger bit and blades are sold separately. There are 2 speed options (0-350 RPM, 0-1,400 RPM) to manage power and run time. A reverse switch clears the earth auger bit from high-resistance soil.

    The XGD01PT earth auger provides high-performance digging with even and consistent holes. It is ideal for post-hole digging, fence installation, large planting jobs, soil sampling, and construction projects.

  •
    Read More
    Quick View

    Makita XGT 40V 4‑Speed HEPA Filter Compact Vacuum

    The 40V max XGT® Brushless Cordless 4-Speed Compact Vacuum (GLC01) is a compact and powerful cordless vacuum with strong suction for fast and efficient cleaning in commercial or residential use. The efficient two-stage HEPA filter captures 99.97% of particulates .3 microns and larger. The bagless cloth filtration system allows for easier cleaning and quicker disposal of debris. It stores easily with the included storage bracket.

    XGT is a system of equipment, tools, batteries, and chargers utilizing 40V max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

    There are 2 feature models of the GLC01 Compact Vacuum. The choice is with or without one battery and rapid charger. Both models come with standard accessories of extension, floor nozzle, crevice tool, HEPA filter, cloth filter, and wall mount . Options for the Makita GLC01 are:

    1. GLC01Z: Vacuum only, with accessories
    2. GLC01R1: Vacuum, (1) 40V max XGT® Lithium-Ion 2.0Ah battery, rapid charger, and accessories
  •
    Read More
    Quick View

    Makita XGT 40V 12″ Dual‑Bevel Sliding Compound Miter Saw

    The 40V max XGT® Brushless 12” Dual-Bevel Sliding Compound Miter Saw (GSL04) delivers faster and smoother cutting. The rail-forward design maximizes workspace when the miter saw is positioned flush against a wall. The miter saw has a large 3-5/8” x 15” cutting capacity at 90°. The saw miters 0° to 60° left and right and bevels from 0° to 48° left and right.

    XGT is a system of equipment, tools, batteries, and chargers utilizing 40V max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

    There are 2 feature models of the GSL04 12” Dual-Bevel Sliding Compound Miter Saw. The choice is with or without one battery and rapid charger. Both models come with standard accessories of a saw blade, vertical vice, dust bag, and hex wrench . Options for the Makita GSL04 are:

    1. GSL04Z: Tool only, with accessories
    2. GSL04M1: Tool, (1) 40V max XGT® Lithium-Ion 4.0Ah battery, rapid charger, and accessories