If you use Makita cordless tools, batteries are a major part of your tool budget. If you are concerned about battery theft, Sync Lock™ is for you. Makita Sync Lock™ is a theft-deterrent system that creates a strong incentive for your workers not to take batteries off the job site. Sync Lock™ disables operation and charging of Makita 18 LXT® batteries by programming a lock-out schedule which can be preset by day, time and calendar. After your initial investment in the hardware, there is no cost. Simply purchase the Sync Lock™ Battery Terminal and set up the software (included) on a computer or laptop – that’s all you need to start using Sync Lock™. There is no added cost for Makita batteries compatible with Sync Lock™, as all Makita batteries with L.E.D. charge-level indicators are ready to use with Sync Lock™. Sync Lock™ works with Makita 18V LXT® Lithium-Ion 2.0Ah, 3.0Ah, 4.0Ah, 5.0Ah and 6.0Ah batteries equipped with L.E.D. charge-level indicators. The following battery model numbers are compatible: BL1802B, BL1830B, BL1840B, BL1850B, BL1860B.
Turn your Makita lithium-ion battery into a charging port with the 18V LXT Lithium-Ion Cordless Power Source. Mount the ADP05 on to your compatible Makita lithium-ion battery and you get two USB charging ports. Each USB port delivers 2.1A output. The built-in clip attaches to a belt or holster, with rubber covers for improved durability.
These hole saw kits contain the most common sizes needed on the jobsite, held in a durable, custom fit, plastic case. They each contain pilot bits, a small arbor with 1/4″ shank, and a large arbor with 7/16″ shank. The Electrician’s Kit includes: 7/8″, 1-1/8″, 1-3/8″, 1-3/4″, 2″, 2-1/2″ hole saws, and small & large arbors with pilot bits. The Plumber’s Kit includes: 3/4″, 7/8″, 1-1/8″, 1-1/2″, 1-3/4″, 2-1/4″ hole saws, and small and large arbors with pilot bits. (Case color and design may vary.)
Our HCS.KIT/9 contains High Speed Steel Annular Cutters which feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. Euroboor HSS annular cutters are equipped with high precision Weldon shanks. This is a 6 piece HSS cutter set with bits of 9/16″, 11/16″, & 13/16″, each in the 1″ and 2″ lengths. The set also includes two pilot pins. They are IBC.70 & IBC.90.
There is increasing demand for more alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE that includes the 18V X2 (36V) LXT® Lithium-Ion 17” Lawn Mower. With zero emissions, lower noise and none of the maintenance associated with gas power equipment, the 18V X2 (36V) Cordless Lawn Mower is a welcome solution for efficient grass cutting. It’s powered by two 18V LXT® batteries for maximum power and run time, but without leaving the 18V battery platform. The Makita-built motor delivers 3,600 RPM, and the Mower offers ease-of-use features including quick height adjustments, a 13 gallon capacity grass collector, and a full 17” cutting width.
Model XML02PT is a kit and includes the Lawn Mower, two fast-charging 18V LXT® Lithium-Ion 5.0Ah batteries and an efficient 18V Dual Port Rapid Optimum Charger.
The Lawn Mower features Makita Extreme Protection Technology (XPT™). XPT™ is a protective seal inside the tool, and is engineered for improved operation in harsh conditions by channeling water and dust from key internal components.
The Makita 18V LXT® Lithium-Ion Brushless Cordless ½” Driver-Drill Kit (XFD061) is an ideal drilling and driving solution for the user who wants a drill with superior power-to-weight ratio. The XFD061 combines 530 in.lbs. of Max Torque with an efficient brushless motor that delivers up 50% more work per charge, increased power and speed, and longer tool life. For the pro user, this means more drilling and driving power, greater productivity, and fewer trips up and down the scaffolding or ladder to get to the battery charger. In driver mode, the adjustable torque settings provide more control for a full range of applications, from large fasteners to smaller, delicate screws. It weighs only 3.8 lbs. (with 3.0Ah battery) for increased comfort and superior power-to-weight ratio. The XFD061 is compatible with Makita 18V LXT Lithium-Ion batteries, from the fast-charging 18V LXT Compact 2.0Ah battery to full-size 18V LXT® batteries for longer run time.
Makita is a pioneer in brushless motor engineering, battery technology, and miter saw innovation. This combined expertise resulted in the 18V X2 LXT® (36V) Lithium-Ion Brushless 12″ Dual Bevel Sliding Compound Miter Saw Kit (XSL08PT), AWS™ and Laser. It’s powered by two 18V Lithium-Ion batteries for 36V power and performance, but without leaving the 18V LXT® platform. X2 LXT technology delivers increased power, speed, and run time, without the hassles of a cord. Get up to 175 cuts per charge in 2×12 SPF lumber with two 5.0Ah batteries.
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V run time and compatibility with the world’s largest 18V lithium-ion cordless tool system. The 18V LXT® Sub-Compact Brushless 3/8” Square Drive Impact Wrench is ideal for working in tight spaces and for overhead applications.
The XWT12RB has an efficient Makita BL™ Brushless Motor engineered for up to 50% longer run time, increased power and speed, and longer tool life. It has variable two-speed with 0-1,300/0-2,400 RPM and 0-2,000/0-3,600 IPM and up to 130 ft.lbs.of Max Torque. The compact size and lower weight mean reduced fatigue for operators, especially for overhead applications.
The Makita 18V LXT® Lithium-Ion Brushless Cordless High Torque 7/16″ Hex Chuck Impact Wrench Kit combines 590 ft.lbs. fastening torque with extended run time and speed control for unmatched fastening performance. It features an efficient Makita brushless motor for longer run time, increased power and speed, and longer tool life. The electronic 3-speed power selection switch gives users more precise fastening control. With the 7/16” hex chuck and hanging ring, it is ideal for linemen and electricians for installation and maintenance of power lines, wood boring, and more.
The Makita 18V LXT® Lithium-Ion Brushless Cordless High Torque 1/2″ Sq. Drive Impact Wrench w/ Friction Ring Anvil Kit combines 740 ft.lbs. fastening torque and 1,180 ft.lbs. break-away torque with extended run time and speed control for unmatched fastening performance. It features an efficient Makita brushless motor for longer run time, increased power and speed, and longer tool life. The electronic 3-speed power selection switch gives users more precise fastening control. It is ideal for a range of users, from iron and steel workers to pipe fitters, railroad and automotive mechanics, forming carpenters, and more.
The Makita 18V X2 LXT® (36V) Brushless 14″ Cut-Off Saw is a cordless metal-cutting solution ideal for light gauge metals including stud and strut, pipe, all thread, conduit, tubing, rebar, and more. The BL™ Brushless Motor eliminates carbon brushes so it runs cooler and more efficiently for longer life. The Saw is powered by two 18V LXT batteries for maximum cordless performance, and delivers 3,800 RPM for the most demanding metal cutting applications. It will cut up to 5″ round and 4” x 7-5/8” rectangular tubing.
Landscapers and contractors are demanding more cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE that includes the 18V X2 LXT® Lithium-Ion (36V) Brushless Cordless Couple Shaft Power Head. With zero emissions, lower noise and maximum versatility, the Power Head is a welcome solution for a range of trimming and cutting applications. It’s powered by two 18V LXT® batteries for maximum performance and run time without the hassles of gas and without leaving the 18V battery platform.