Product Tag - Drywall

  •
    Read More
    Quick View

    Grey Plastic Anchor, No Lip

    This is a standard plastic expansion anchor that can be used in drywall or solid walls for light hanging or attaching needs. This type has no outer ring or lip that remains outside the pre-drilled hole, so there will not be any plastic visible once the screw is in place. Also, whatever is being attached to the wall will sit directly against the wall, with no gap.

  •
    Read More
    Quick View

    Blue Plastic Anchor, w/Lip

    This is a standard plastic expansion anchor that can be used in drywall or solid walls for light hanging or attaching needs.

  •
    Read More
    Quick View

    Hollow Wall Anchor, Long and Short

    The sleeve type hollow wall anchor is designed for use in base materials such as plaster, wallboard, concrete block, hollow tile or plywood. It is installed using a drill and can be used with various wall thicknesses. The sections of the sleeve expand as the screw is tightened and driven into the wall. The front section of the hollow wall anchor will add permanent screw threads, so that once set, the screw may be removed as often as necessary without affecting the anchor.
    These anchors are also known as Molly bolts.

  •
    Read More
    Quick View

    E-Z Anchor Drywall Anchors

    The E-Z Ancor is a one-piece self-drilling anchor designed for optimal holding performance in drywall. Because it pre-drills its own small precise hole, no hole preparation is necessary.
    With a range of choices, including mini, regular and heavy duty, and available in zinc or nylon, there is an E-Z solution to your hanging problems.

  •
    Read More
    Quick View

    Makita Drywall Screwdriver, 18V LXT

    The 18V LXT® Lithium-Ion Cordless Drywall Screwdriver (model XSF03) breaks new ground for drywall contractors. It is ideal for hanging sheetrock, metal framing, installing subfloors, backer board, and decking applications.It’s powered by a Makita BL™ Brushless Motor for longer run time, increased power and speed, and longer tool life. With the exclusive Push Drive™ Technology, the 18V Drywall Screwdriver can be set on lock-on mode so the motor starts only when the fastener is engaged. This gives contractors a quieter work environment, and also saves on battery power.

    It’s built for added durability with Extreme Protection Technology (XPT™), which is engineered for improved dust and water resistance for operation in harsh job site conditions.

    There are 2 feature models of the XSF03 Drywall Screwdriver. The choice is with or without two batteries and rapid charger. Options for the Makita XSF03 are:

    1. XSF03Z: Tool only
    2. XSF03T: Tool, (2) 18V LXT® Lithium-Ion 5.0h batteries, rapid charger, and tool case
  •
    Quick View

    Makita Cut out Tool, 18V LXT

    The 18V LXT® Lithium-Ion Cordless Cut-Out Tool is a powerful and efficient solution for drywall contractors, with the cutting performance and power of a corded tool but without the hassles of a cord. It delivers 30,000 RPM for fast cutting, and has a slim body design for improved comfort.

  •
    Quick View

    Makita 9″ Drywall Sander, 18V LXT

    Makita® 18V LXT® Brushless Cordless Drywall Sander delivers increased efficiency and mobility for drywall finishers. The compact and lightweight design make the XLS01 easier to use for extended periods of time. The XLS01Z delivers up to 35 minutes of run time on a single charge of an 18V 5.0Ah battery. Users can match the speed to the application with a variable speed control dial (1,000 – 1,800 RPM), and Constant Speed Control automatically provides additional power to the motor to maintain speed under load for consistent performance.

  •
    Quick View

    Makita Drywall/wood Cut out Saw, 18V LXT

    For straighter, more accurate cutting in vertical and overhead applications, Makita has a solution with the 18V LXT® Lithium-Ion Cordless Cut-Out Saw. It’s designed to cut openings in installed board, including drywall and plywood, and will cut up to 984 feet of ½” drywall on a single charge using a 4.0Ah battery. To help prevent damage to objects behind the board being cut, it has a short ¼” stroke length with an adjustable blade depth up to 1-3/16″ (9/16″ in wood). For improved dust extraction, the XDS01Z has a dust port with a clear dust box for increased visibility. It is ideal for cut-outs and drywall repair applications.

  •
    Quick View

    Makita Drywall Screwdriver

    The Makita 4,000 RPM Drywall Screwdriver (model FS4200) delivers speed, power and ergonomics for drywall applications. It is ideal for driving drywall screws into steel studs. The FS4200 is powered by a 6 AMP motor that delivers 0-4,000 RPM and includes a large variable speed trigger with lock-on button for continuous use. The adjustable depth locator assembly with Makita’s Sure-Lock™ feature is engineered for consistent screw depth.

    The FS4200 has an ergonomic grip for increased comfort, and a cast aluminum gear housing for less weight (only 3.0 lbs.) and increased durability. Other features include a depth locator holder for convenient storage during framing applications, a bit storage on the base of the grip to reduce downtime, and an LED light to illuminate the work surface.