Product Tag - Drywall Anchors

  •
    Read More
    Quick View

    Toggler Toggle Bolts

    SNAPTOGGLE heavy-duty toggle bolts carry twice the load in a smaller hole than standard wing anchors. A patented strap design with sturdier straps and smaller ratchet interval adjusts more precisely and snaps off flush to the surface. SNAPTOGGLE heavy-duty toggle bolts do NOT spin when installed with a screw gun and provide superior holding with metal-to-metal fastening.
    At Thread Source, we stock the zinc-plated steel versions of these SNAPTOGGLE bolts. There also are 304 stainless steel versions of the SNAPTOGGLE bolts available by special order.

  •
    Read More
    Quick View

    Toggler Alligator Anchor

    ALLIGATOR anchors are designed to hold high loads in solid walls, ceilings, and floors … but also hold securely when they encounter an unexpected cavity, such as in hollow brick or hollow block, or even in drywall or, especially, in tile over drywall. The specially formulated polypropylene body flows into and locks up with any undercuts in the hole, bonding the screw to the wall and sealing the hole to prevent moisture from entering. Optimal holding values [measured in tons] are obtained in highly dense substrates by using a screw diameter and a drill diameter of the same size as the anchor diameter. The anchor is available both unflanged for push through mounting and with a flange for use where a cavity is anticipated (drywall, hollow brick, etc.).

  •
    Read More
    Quick View

    Toggler Hollow Door / Wall Anchors

    TOGGLER plastic toggle anchors provide vibration-proof anchoring of light to medium loads in hollow walls & ceilings but also hold securely when they encounter an unexpected solid, such as a wooden stud, or when performing as wedge anchors in materials with thicknesses above their normal wall grip range. Improvements in the original design have increased holding strength and abuse resistance. Holding arms have been thickened and strengthened without increasing the insertion hole size, and major stress points have been significantly reinforced without increasing anchor size.

  •
    Read More
    Quick View

    Powers 2275 Wall Dog

    The Wall-Dog is an all steel, one-piece screw anchor, which features high-profile threads for easy fastening into wallboard and other masonry base materials. The deep cutting, corkscrew-like threads provide for smooth entry and a powerful hold.

  •
    Read More
    Quick View

    Toggle Wing, Zinc Plated

    A Toggle spring wing anchor, also called a toggle nut, in zinc plated steel is an anchor used in hollow wall applications (walls with space on the other side) such as drywall and concrete blocks (also called cinder blocks) or any hollow concrete masonry unit. Toggle wings are often used to replace spring wings used in the installations of toggle bolts. Toggle nuts are used with machine screws through pre-drilled holes.

  •
    Read More
    Quick View

    Toggle Bolt, Zinc Plated

    The Toggle Bolt is a spring wing type hollow wall anchor designed for use in block, wallboard and other hollow base materials. The Toggle Bolt is a two-part assembly consisting of a machine screw and a spring wing toggle. Sizes range from 1/8″ x 2″ to 1/2″ x 6″ with combo round, flat, mushroom, tie-wire or slotted hex head styles.

  •
    Read More
    Quick View

    Plastic Anchor Kit

    This kit contains standard drywall/concrete expansion anchors, screws, and a masonry drill bit sized appropriately.
    Kits are available with standard Phillips pan head screws, or with slotted hex head washer screws. 
    Sizes are:
    3/16″ Anchor & Bit, with #6 – #8 x 3/4″ Phillips Pan Head Screw
    1/4″ Anchor & Bit, with #10 – #12 x 1″ Phillips Pan Head Screw
    1/4″ Anchor & Bit, with #10 – #12 x 1″ Slot Hex Head Screw

  •
    Read More
    Quick View

    Grey Plastic Anchor, w/Lip

    This is a standard plastic expansion anchor that can be used in drywall or solid walls for light hanging or attaching needs.

  •
    Read More
    Quick View

    Grey Plastic Anchor, No Lip

    This is a standard plastic expansion anchor that can be used in drywall or solid walls for light hanging or attaching needs. This type has no outer ring or lip that remains outside the pre-drilled hole, so there will not be any plastic visible once the screw is in place. Also, whatever is being attached to the wall will sit directly against the wall, with no gap.

  •
    Read More
    Quick View

    Blue Plastic Anchor, w/Lip

    This is a standard plastic expansion anchor that can be used in drywall or solid walls for light hanging or attaching needs.

  •
    Read More
    Quick View

    Hollow Wall Anchor, Long and Short

    The sleeve type hollow wall anchor is designed for use in base materials such as plaster, wallboard, concrete block, hollow tile or plywood. It is installed using a drill and can be used with various wall thicknesses. The sections of the sleeve expand as the screw is tightened and driven into the wall. The front section of the hollow wall anchor will add permanent screw threads, so that once set, the screw may be removed as often as necessary without affecting the anchor.
    These anchors are also known as Molly bolts.

  •
    Read More
    Quick View

    E-Z Anchor Drywall Anchors

    The E-Z Ancor is a one-piece self-drilling anchor designed for optimal holding performance in drywall. Because it pre-drills its own small precise hole, no hole preparation is necessary.
    With a range of choices, including mini, regular and heavy duty, and available in zinc or nylon, there is an E-Z solution to your hanging problems.