Product Tag - Corded

  •
    Quick View

    Makita 1″ Rotary Hammer, SDS+, AVT®, HEPA Dust Extractor

    The Makita 1″ SDS-PLUS AVT® Rotary Hammer, HEPA Dust Extractor with Pistol Grip (HR2653) is a total solution that combines efficient drilling and chipping with reduced vibration and improved dust extraction.

    The HR2653 is equipped with Anti-Vibration Technology (AVT®), an internal counterbalance system for significantly less vibration. It has a built-on dust extractor that captures concrete dust during drilling. HR2653 combines these performance features in a compact size. It is ideal for a range of applications including overhead drilling into concrete, wood and metal, removing tile, and more.

    The HEPA Dust Extractor is OSHA Table 1 compliant for Exposure to Respirable Crystalline Silica (rule 1926.1153).

  •
    Quick View

    Makita XGT 40V Wobble Light, AC & 18V LXT

    The Makita 40V max XGT® Upright L.E.D. Area Light (ML010G) delivers bright illumination, versatility, and convenience. Three modes of operation deliver 5,500 lumens on High, 3,000 lumens on Medium, and 1,500 lumens on Low.

    The ML010G delivers up to 27 hours of continuous illumination with two 5.0Ah 40V XGT® batteries on low. It can hold (2) 40V XGT® batteries or (2) 18V LXT® batteries but operates using (1) battery at a time. It utilizes a second battery for extended run time. An AC inlet and outlet can be used to chain multiple Upright Lights together.

  •
    Quick View

    Makita 10″ Dual Bevel Sliding Compound Miter Saw, Laser

    The Makita 10” Dual-Bevel Sliding Compound Miter Saw with Laser (model LS1019L) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. The saw is powered by a 15 AMP direct drive motor with soft start.
    The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (5-1/4”) and crown molding (6-5/8” nested), the largest in its class. It will also crosscut a 4×12 at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0° to 48° (left and right).

  •
    Quick View

    MAKITA 1-1/8″ SDS+ ROTARY HAMMER W/CORD

    The 1-3/16” Rotary Hammer (HR3001CK) is engineered for performance and power. It has a 7.5 AMP motor that delivers 2.6 ft.lbs. of impact energy to handle the most demanding applications.

    The 3-mode operation offers “rotation only”, “hammering with rotation” or “hammering only” for multiple applications. Modes can be easily changed with a recessed hammer-function selector, which is located below the gear housing for improved durability.

    The L-shaped body design brings the operator closer to the application for increased accuracy. A vibration-absorbing back handle and rubberized soft grip provides increased operator comfort.

  •
    Quick View

    Makita 1″ SDS+ Rotary Hammer w/D-Handle, Corded

    Makita’s versatile HR2475 1-inch SDS-PLUS Rotary Hammer delivers more efficient hitting in a compact size for faster, more productive work. The HR2475 is powered by a 7 AMP motor that delivers a no load speed of 0-1,100 RPM, with 0-4,500 BPM and 2.7 Joules of impact energy. Three-mode operation includes “Rotation Only,” “Hammering with Rotation” and “Hammering Only” for multiple applications. The HR2475 is a versatile and hard-hitting rotary hammer for masons, remodelers, electricians, maintenance crews, and general contractors seeking a best-in-class 1” rotary hammer.

  •
    Quick View

    Makita Quiet Series Air Compressor, 1.5 HP, 3 Gallon

    Compressors are workhorse tools on the job site and in the work shop. Makita® Air Compressors are favorites for their faster recovery time, lower noise, longer tool life, and consistent performance.
    The Makita® Quiet Series 1-1/2 HP, 3 Gallon, Oil-Free, Electric Air Compressor (MAC320Q) features a Quiet Series Design, combining strong performance with lower noise. At only 60 dBA, it’s ideal for indoor use during case and base installation, trim and finish carpentry, cabinet or furniture making, and more. The MAC320Q runs at a lower RPM, resulting in longer motor and pump life. It is powered by an efficient 1-1/2 horsepower induction motor that provides up to 90 PSI. It also features a lightweight design (only 52.5 lbs.) for increased portability.

  •
    Quick View

    Makita DML811 Work Light, AC & 18V LXT

    The 18V LXT® Lithium-Ion Cordless/Corded Work Light (DML811) offers the convenience of cordless or corded operation, and provides bright and even illumination for work spaces. At full brightness it provides 3,000 lumens of light, and 750 lumens on low mode. Adjusting knobs enable the user to direct the light to the desired angle. The Work Light can be mounted on an optional tripod stand (sold separately). Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions.
    The fast-charging 18V LXT Lithium-Ion 5.0Ah Battery (sold separately) delivers 11 hours of continuous illumination on the low setting.

  •
    Quick View

    Makita DML810 Wobble Light, AC & 18V LXT

    The 18V X2 LXT® Cordless/Corded Upright L.E.D. Area Light (DML810) is a self-righting light that stays in an upright position. The flood light features a self-balancing design that keeps the light in an upright position, even when knocked over, and delivers 5,500 / 3,000 / 1,500 lumens on High / Medium / Low.
    L.E.D. lights effectively illuminate work area without the high heat of halogens and incandescent lights. This light illuminates 360 degrees for full illumination of the space, or 180 degrees to the left or right.

  •
    Quick View

    Makita 6-1/2″ Plunge Circular Saw, Corded

    The Makita 6-1/2” Plunge Cut Circular Saw (model SP6000J) delivers precise and more accurate cutting when combined with an optional guide rail system constructed with anodized aluminum for smooth, straight cuts. The saw and rail system work together to produce accurate cuts with minimal tear-out. The saw combines a powerful 12 AMP motor and a large cutting capacity with magnesium components for less weight and electronic speed control to maintain constant speed under load for smooth cutting and a splinter-free mirror finish. The SP6000J is a more portable option to a table saw for select applications, and it is ideal for use on the jobsite or in a workshop.
    Precision Settings and Features for Quality Cuts
    The saw has a bevel capability of -1° to 48° with positive stops at 22.5° and 45°. The saw delivers precise cutting, as the position of the blade enters the material on the same cutting line whether cutting straight or bevel. In addition, the saw has close-to-wall cutting (11/16-inch) for expanded cutting applications. The built-in depth stop allows a preliminary cut of 1/16-inch to be performed before the entire material is cut through for clean and splinter-free cutting

  •
    Quick View

    Makita 13″ Jobsite Fan 3 Speed, 18V LXT

    The Makita® 18V LXT® Lithium-Ion Cordless Fan (model DCF203Z) is a powerful and portable solution for painters, contractors, and more.
    The DCF203Z has three settings for optimal air velocity control. It can be powered by Makita® 18V LXT Lithium-Ion Batteries or an AC adapter. The fan automatically oscillates 45° right and left and manually tilts 90° up and 45° down for convenience redirection of air flow. The fan body is 13″, and the fan blade span is 9-1/4″.

  •
    Quick View

    Makita 4-1/2″ Slide Switch Grinder w/Cord, 2 Pack

    The Makita 4-1/2″ Angle Grinder has a labyrinth construction that seals and protects the motor and bearings from dust and debris for a long life, with an additional, protective zigzag varnish that seals the motor from contaminants by forming a barrier under rotation. This UL-listed grinder provides high-output power with its 7.5 AMP motor that maintains a 11,000 RPM speed to produce excellent grinding with a 2-1/2 in. small-circumference, barrel-grip handle for added comfort. All ball-bearing design and metal gear housing provide durability.
    This is a special 2-Pack of this corded tool.

  •
    Quick View

    Makita 1″ SDS-PLUS Rotary Hammer, 7AMP, AVT®

    The Makita 1” AVT® Rotary Hammer (model HR2611F, with Pistol-Grip) is engineered with Anti-Vibration Technology (AVT®), an internal counterbalance system for significantly less vibration. The HR2611F combines performance and power with less vibration in a compact size, and is ideal for a range of applications including overhead drilling.