Makita LXT 18V / 36V Tools Archives - Page 16 of 5

Quick View

Makita 25-1/2″ Hedge Trimmer Kit, 18V X2 LXT

The Makita 18V X2 LXT® Hedge Trimmer (model XHU04PT) is powered by two 18V LXT® batteries (36V), so you get 36V power and run time for gas-powered demands, without leaving the 18V LXT® platform. Model XHU04PT is a kit and includes two fast-charging 18V LXT 5.0Ah batteries and an 18V Dual Port Charger that will charge two batteries simultaneously for increased productivity and less downtime.
Quick View

Makita Drill Driver Kit, 18V LXT

The Makita 18V LXT® Lithium-Ion Brushless Cordless ½” Driver-Drill Kit (XFD131) is an ideal drilling and driving solution for the user who wants a drill with superior power-to-weight ratio. The XFD131 combines 440 in.lbs. of Max Torque with an efficient brushless motor that delivers up 50% more work per charge, increased power and speed, and longer tool life. For the pro user, this means more drilling and driving power, greater productivity, and fewer trips up and down the scaffolding or ladder to get to the battery charger. In driver mode, the adjustable torque settings provide more control for a full range of applications, from large fasteners to smaller, delicate screws. It weighs only 3.8 lbs. (with 3.0Ah battery) for increased comfort and superior power-to-weight ratio.
Quick View

Makita 4-Speed Impact Driver with Quick Shift, 18V LXT

Makita has a legacy of innovation in the cordless impact driver category, and the 18V LXT® Brushless 4-Speed Impact Driver (XDT16Z) sets new standards. The XDT16Z offers users four speeds, as well as Makita’s exclusive Quick-Shift Mode™ for increased fastening control. Quick-Shift Mode™ uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening.
Another precision setting is Tightening Mode (T-mode), which downshifts and reduces rotation and impact speed prior to driving the screw into place, and is engineered to minimize screw thread stripping, screw breakage and damage to work.
Quick View

Makita Subcompact Impact Driver Kit, 18V LXT

Do more with less. The Makita 18-Volt LXT® Lithium-Ion Sub-Compact Brushless Cordless Impact Driver is a fastening solution with significantly less weight. The 18V Sub-Compact Impact Driver is part of a new class of compact, with the size and weight of lower voltage tools but with the performance, power and compatibility of 18-Volt. The expansive breadth-of-line of the Makita 18-Volt LXT® Series means an 18-Volt battery from any LXT® tool will power the 18-Volt Sub-Compact Impact Driver.

It has an efficient brushless motor with two speed settings and dual L.E.D. lights illuminate the work area. The innovative Assist Mode (A-mode) helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins, and is ideal for driving longer fasteners. At only 5-5/16 in. and 2.6 lbs. (with 2.0Ah battery) it is a fastening solution with superior comfort and handling.
Quick View

Makita Drywall/wood Cut out Saw, 18V LXT

For straighter, more accurate cutting in vertical and overhead applications, Makita has a solution with the 18V LXT® Lithium-Ion Cordless Cut-Out Saw. It’s designed to cut openings in installed board, including drywall and plywood, and will cut up to 984 feet of ½” drywall on a single charge using a 4.0Ah battery. To help prevent damage to objects behind the board being cut, it has a short ¼” stroke length with an adjustable blade depth up to 1-3/16″ (9/16″ in wood). For improved dust extraction, the XDS01Z has a dust port with a clear dust box for increased visibility. It is ideal for cut-outs and drywall repair applications.
Quick View

Makita Portable Wet / Dry Vac, 18V LXT

The 18V LXT® Brushless 2 Gallon HEPA Filter Portable Wet/Dry Dust Extractor/Vacuum, Tool Only (XCV11Z) is a powerful, portable solution in dust management applications. The XCV11Z captures 99.97% of particulates .3 microns and larger with the efficient HEPA filter. It’s compact and cordless design with an shoulder strap (sold separately) allows easy transport of the vacuum throughout the space for efficient use. Get up to 60 minutes of continuous run-time and up to 57 CFM and 27” water lift of suction with just one 5.0Ah battery (sold separately).
Quick View

Makita 2.1 Gallon Hybrid HEPA Dust Extractor Vacuum, 18V X2 LXT

Clean-ups just got easier with the Makita 18V X2 LXT® Lithium-Ion (36V) Cordless/Corded 2.1 Gallon Dry Vacuum. The XCV04Z offers corded or cordless operation for maximum versatility and convenience.

In cordless operation, the XCV04Z is powered by two 18V LXT® batteries for 36V power and run-time, without leaving the 18V LXT® battery platform. Using two 18V 5.0Ah batteries (sold separately), the XCV04Z delivers up to 65 minutes of continuous run time on low setting and 30 minutes on high setting, with 74 CFM and 36” water lift of suction.

In corded operation, the vacuum delivers 127 CFM and 96” water lift. The 19.7′ power cord combined with the anti-static hoses (1-1/2″ x 8′ or 1” x 11-1/2′, both included) provide extended reach for fast clean-ups.
Quick View

Makita 1/4″, 3/8″ Threaded Rod Cutter, 18V LXT

Makita has delivered a cordless cutting solution for steel rod cutting with the 18V LXT® Brushless Cordless Threaded Rod Cutter. It will make up to 1,300 cuts of 3/8” coarse thread threaded rod and 1,200 cuts of 3/8” coarse thread stainless steel threaded rod with a 5.0Ah battery (sold separately). The compact design makes the XCS03Z ideal for overhead cutting of installed threaded rod. Provides spark-free cuts that are clean and burr-free allowing easy hand-threading of fastener or nut.
Quick View

Makita 4-1/2 – 5″ Angle Grinder w/ Variable Speed, 18V LXT

Makita delivers corded grinding performance without the cord with the 18V LXT® Lithium-Ion Brushless 4-1/2″ / 5” Cut-Off/Angle Grinder with Electric Brake (XAG16Z). It’s powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. For the most demanding applications, Makita’s exclusive Automatic Speed Change™ technology automatically adjusts speed and torque during operation for optimal performance. The XAG16Z is ideal for grinding and cutting a wide range of materials including tile, concrete, pipe, conduit, and more.

Additional features include an electric brake that stops the grinding or cut-off wheel in 2 seconds or less, and Electronic Torque Control that turns the motor off if rotation speed suddenly slows or the wheel is forced to a stop. The variable speed control dial allows manual RPM adjustment (3,000 – 8,500), allowing the user to match the speed to the application.
Quick View

Makita 7″ Cut Off / Angle Grinder Kit, 18V X2 LXT

Makita, a pioneer in brushless motor technology and battery innovation, combines both in the 18V X2 LXT® (36V) Lithium-Ion Brushless 7” Paddle Switch/Angle Grinder with Electric Brake. It’s powered by two 18V Lithium-Ion batteries for 36V power and performance, and has an electronically-controlled BL™ Brushless motor that matches torque and RPM to the application. Makita 18V X2 means freedom from the cord, even for demanding applications like grinding and cut-off applications that often call for a corded grinder. Best of all, users can remain in one battery platform, using the same fast-charging 18V batteries on the XAG12PT as they use across the Makita 18V LXT® cordless tool system.
Quick View

Makita 4-1/2″ / 5″ Angle Grinder w/ Brake, 18V LXT

Makita delivers corded grinding performance without the cord with the 18V LXT® Lithium-Ion Brushless 4-1/2” Cut-Off/Angle Grinder with Electric Brake (XAG09Z). It’s powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. For the most demanding applications, Makita’s exclusive Automatic Speed Change™ Technology automatically adjusts speed and torque during operation for optimal performance.

For added convenience, the XAG09Z has an electric brake that stops the wheel in 2 seconds or less upon release of the switch. The XAG09Z is ideal for grinding, cutting and sanding a wide range of materials including tile, concrete, pipe, conduit, and more.
Quick View

Makita 1/2″ Right Angle Drill Kit, 18V X2 LXT

Makita, a pioneer in brushless motor technology and battery innovation, combines both in the 18V X2 LXT® (36V) Lithium-Ion Brushless Cordless ½” Right Angle Drill. It’s powered by two 18V LXT® Lithium-Ion batteries for maximum performance, and has an electronically-controlled BL™ Brushless motor that matches torque and RPM to the changing demands of the application. Makita 18V X2 means freedom from the cord, and the XAD03 will take on the most demanding applications like drilling up to 6-1/4” holes with hole saws and 4-5/8” holes with self-feed bits. Best of all, users can remain in one battery platform, using the same fast-charging 18V batteries with the XAD03 as they use across the expansive Makita 18V LXT® cordless system.