Makita Corded, Gas, & Air Tools

  •
    Quick View

    Makita XGT 40V Wobble Light, AC & 18V LXT

    The Makita 40V max XGT® Upright L.E.D. Area Light (ML010G) delivers bright illumination, versatility, and convenience. Three modes of operation deliver 5,500 lumens on High, 3,000 lumens on Medium, and 1,500 lumens on Low.

    The ML010G delivers up to 27 hours of continuous illumination with two 5.0Ah 40V XGT® batteries on low. It can hold (2) 40V XGT® batteries or (2) 18V LXT® batteries but operates using (1) battery at a time. It utilizes a second battery for extended run time. An AC inlet and outlet can be used to chain multiple Upright Lights together.

  •
    Quick View

    Makita 10″ Dual Bevel Sliding Compound Miter Saw, Laser

    The Makita 10” Dual-Bevel Sliding Compound Miter Saw with Laser (model LS1019L) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. The saw is powered by a 15 AMP direct drive motor with soft start.
    The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (5-1/4”) and crown molding (6-5/8” nested), the largest in its class. It will also crosscut a 4×12 at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0° to 48° (left and right).

  •
    Quick View

    Makita 11 Gallon HEPA Xtract Vac, Corded

    The 11 Gallon Wet/Dry HEPA Filter Dust Extractor/Vacuum (VC4210L) is a best-in-class solution for dust extraction in concrete and woodworking applications. The VC4210L is powered by a 12 AMP motor that generates 148 CFM of suction power and 92” of water lift to take on the most challenging applications.

    Designed with contractors in mind, the VC4210L combines power with less noise and less weight in a smaller footprint and is ideal for indoor and room-to-room applications.

  •
    Quick View

    MAKITA 1-1/8″ SDS+ ROTARY HAMMER W/CORD

    The 1-3/16” Rotary Hammer (HR3001CK) is engineered for performance and power. It has a 7.5 AMP motor that delivers 2.6 ft.lbs. of impact energy to handle the most demanding applications.

    The 3-mode operation offers “rotation only”, “hammering with rotation” or “hammering only” for multiple applications. Modes can be easily changed with a recessed hammer-function selector, which is located below the gear housing for improved durability.

    The L-shaped body design brings the operator closer to the application for increased accuracy. A vibration-absorbing back handle and rubberized soft grip provides increased operator comfort.

  •
    Quick View

    Makita 1″ SDS+ Rotary Hammer w/D-Handle, Corded

    Makita’s versatile HR2475 1-inch SDS-PLUS Rotary Hammer delivers more efficient hitting in a compact size for faster, more productive work. The HR2475 is powered by a 7 AMP motor that delivers a no load speed of 0-1,100 RPM, with 0-4,500 BPM and 2.7 Joules of impact energy. Three-mode operation includes “Rotation Only,” “Hammering with Rotation” and “Hammering Only” for multiple applications. The HR2475 is a versatile and hard-hitting rotary hammer for masons, remodelers, electricians, maintenance crews, and general contractors seeking a best-in-class 1” rotary hammer.

  •
    Quick View

    Makita Quiet Series Air Compressor, 1.5 HP, 3 Gallon

    Compressors are workhorse tools on the job site and in the work shop. Makita® Air Compressors are favorites for their faster recovery time, lower noise, longer tool life, and consistent performance.
    The Makita® Quiet Series 1-1/2 HP, 3 Gallon, Oil-Free, Electric Air Compressor (MAC320Q) features a Quiet Series Design, combining strong performance with lower noise. At only 60 dBA, it’s ideal for indoor use during case and base installation, trim and finish carpentry, cabinet or furniture making, and more. The MAC320Q runs at a lower RPM, resulting in longer motor and pump life. It is powered by an efficient 1-1/2 horsepower induction motor that provides up to 90 PSI. It also features a lightweight design (only 52.5 lbs.) for increased portability.

  •
    Quick View

    Makita XRM11 Bluetooth Jobsite Speaker, 18V XLT

    Users can surround themselves with music, on or off the job site, with the new Makita® 18V LXT® / 12V max CXT® Cordless Bluetooth Job Site Speaker. Two speakers can be connected to listen in true stereo sound or connect up to ten speakers wirelessly to hear music throughout the job site. The speaker delivers rich full sound from one 4″ woofer with a passive radiator and one 1.4″ tweeter.
    Compatible with a 12V max CXT and 18V LXT Lithium-Ion Batteries, this radio provides more flexibility for users. An included AC Adapter offers corded operation.

  •
    Quick View

    Makita 6-1/2″ Plunge Circular Saw, Corded

    The Makita 6-1/2” Plunge Cut Circular Saw (model SP6000J) delivers precise and more accurate cutting when combined with an optional guide rail system constructed with anodized aluminum for smooth, straight cuts. The saw and rail system work together to produce accurate cuts with minimal tear-out. The saw combines a powerful 12 AMP motor and a large cutting capacity with magnesium components for less weight and electronic speed control to maintain constant speed under load for smooth cutting and a splinter-free mirror finish. The SP6000J is a more portable option to a table saw for select applications, and it is ideal for use on the jobsite or in a workshop.
    Precision Settings and Features for Quality Cuts
    The saw has a bevel capability of -1° to 48° with positive stops at 22.5° and 45°. The saw delivers precise cutting, as the position of the blade enters the material on the same cutting line whether cutting straight or bevel. In addition, the saw has close-to-wall cutting (11/16-inch) for expanded cutting applications. The built-in depth stop allows a preliminary cut of 1/16-inch to be performed before the entire material is cut through for clean and splinter-free cutting

  •
    Quick View

    Makita 4-1/2″ Slide Switch Grinder w/Cord, 2 Pack

    The Makita 4-1/2″ Angle Grinder has a labyrinth construction that seals and protects the motor and bearings from dust and debris for a long life, with an additional, protective zigzag varnish that seals the motor from contaminants by forming a barrier under rotation. This UL-listed grinder provides high-output power with its 7.5 AMP motor that maintains a 11,000 RPM speed to produce excellent grinding with a 2-1/2 in. small-circumference, barrel-grip handle for added comfort. All ball-bearing design and metal gear housing provide durability.
    This is a special 2-Pack of this corded tool.

  •
    Quick View

    Makita 1″ SDS-PLUS Rotary Hammer, 7AMP, AVT®

    The Makita 1” AVT® Rotary Hammer (model HR2611F, with Pistol-Grip) is engineered with Anti-Vibration Technology (AVT®), an internal counterbalance system for significantly less vibration. The HR2611F combines performance and power with less vibration in a compact size, and is ideal for a range of applications including overhead drilling.

  •
    Quick View

    Makita 1/2″ Impact Wrench w/ Detent Pin Anvil

    The Makita 1/2 in. Drive Impact Wrench features a 1/2 in. square drive which delivers 2,000 impacts per minute and 260 ft.-lb. of torque for the most demanding applications. This convenient impact wrench also features an ergonomically designed grip for improved control and user comfort. The impact wrench also features an impact-resistant gear case and rubber boot engineered to protect the metal gears.

  •
    Quick View

    Makita Multi Tool Kit w/ Cord

    Trades of all kinds are turning to oscillating multi-tools for a full range of applications, and the Makita Multi-Tool (TM3010CX1) combines power and performance with comfort and convenience features like reduced vibration and lower noise. The TM3010CX1 is ideal for cutting, sanding, scraping, tile replacement, grout removal, and more.

    The TM3010CX1 is powered by a 3.0 AMP motor with soft start for smooth start-ups. The variable speed control dial (6,000 – 20,000 OPM) enables the user to match the speed to the application, and the electronic speed control maintains constant speed under load for smoother, higher-quality work. The TM3010CX1 has a 3.2 degree oscillation angle engineered for faster, more aggressive cutting and sanding.